Super Glide FXR

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter, and includes rear cylinder timing adjustment for rate of advance.Ignition kit fits all 1970-1998...

Headlamp wiring harness bushing is straight type. Fits:FXR 1982-1994FX 1974-1984XL 1974-1994Additional Information OEM No.72501-74

Ignition sensor cup screw with washer.Sold in a pack of 10. *NOTE: Not for sale in California. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FL 1982-1984XL 1982-1999FLT...

FXR electric starter kit features a 6" starter motor and includes components for complete installation. Fits:FXR 1986-1988Additional Information UOM1 - K

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-2037 - Left FXR Electrical Panel BlackDescriptionFXR electrical panel for the left side features a black finish and is the flat type. Panel will mount starter relay. Use 1/4"-20 well nuts...

V-Twin - 32-2022 - Right FXR Electrical Panel BlackDescriptionFXR electrical panel for the right side features a black finish and is the offset type.Accepts a starter relay and 4 circuit breakers...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

V-Twin - 32-1910 - Battery Cable Set BlackDescriptionFour gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 3 cables. Includes extra red shrink tubing and...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Accel starter solenoid has a zinc finish.Use 4-Speed style solenoid on 1984-1988 FXST 5-Speed models. Fits:FXR 1982-1988FLT 1979-1988Additional Information

Main wiring harness kit features plastic wire in original factory color codes, with all terminals applied in vinyl loom.Handlebar and tail lamp wiring must be purchased separately. Fits:FXR...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Battery cable measures 8-1/2" long. Cable is 4 gauge with 17/64" and 11/32" hole sizes with heat shielded terminal ends.Cable is braided. Fits:FXR 1987-1994FLT 1982-1992Additional Information

Battery cable measures 8-1/2" for solenoid to starter.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FLT 1982-1984FXR 1985-1988Additional Information

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Rear 3-1/2" long threaded stud is hollow for wiring.. Fits:FXR 1987-1994Additional Information OEM No.68493-87

Kit includes special hardware and extension to provide clearance for saddlebags. Fits:XL 1979-1989FXR 1982-1989Additional Information OEM No.905

Chrome air cleaner support bracket with choke mount.Use the mini breather bolt sets to mount steel support bracket to engine. Choose the appropriate breathers for year of motor. Bolt location, center...

Starter motor bracket with zinc finish fits Hitachi starters. Fits:FXR 1983-1989Additional Information UOM1 - EA

Chrome air cleaner bracket for evolution models, mounts to boss on engine head to support custom air cleaner.Use the mini breather bolt sets to mount steel support bracket to engine. Choose the...

Chrome long rear seat tab when installing a 1 piece seat. Fits:FXR 1982-1994XL 1979-1996Additional Information OEM No.51651-79

Starter motor bracket with chrome finish fits Hitachi starter. Fits:FXR 1983-1989Additional Information OEM No.31479-83

V-Twin - 31-3943 - License Plate Frame Bracket Kit ChromeDescriptionChrome fender mount 3-hole bracket kit includes a rubber anti-vibration block to cushion it against the fender. Also mounts to...

FXRP seat T bar features a black finish. Fits:FXR 1981-1994Additional Information OEM No.52258-86 UOM

V-Twin - 31-1983 - Chrome Engine StabilizerDescriptionChrome Velva Ride engine stabilizer features a steel body with plunger and urethane dampener that creates a mini shock absorber. Fits:FXR...

FXR seat hinge and latch kit. Fits:FXR 1982-1994Additional Information OEM No.52235-82 UOM1 - KIT

Black rear pipe bracket for FXR models is the bolt on style.The bracket is laser cut from .188" of OEM #75234-88, using thicker material and adding press brake bends at angle to match stock frame...

ISO front engine mount is constructed of polyurethane and heat treated material. Fits:FXR 1982-1994FXR 1982-1984FLT 1979-2007Additional Information

Black ISO front engine mount is 40% stronger. Fits:FXR 1982-1994FLT 1979-2008Additional Information OEM No.16207-79D

ISO front engine mount. Fits:FXR 1982-1994FLT 1979-2008Additional Information UOM1 - EA Manufacturer<

FXRP solo seat mount kit includes seat "T" front bracket and rear spring. Kit accepts Police solo seats. Fits:FXR 1983-1994Additional Information UOM1 -

Chrome regulator mount bracket Fits:FXR 1982-1989FLT 1979-1989Additional Information UOM1 - EA Manufa

Front exhaust pipe bracket features a chrome finish. Fits:FXRDG 1984-1984FXRS-CONV 1990-1993FXR 1982-1994FXR 1999-1999 2, 3FXR 2000-2000 4FXRS-SP 1986-1993FXRD 1986-1986FXRC 1985-1985FXRS...

Urethane ISO mount replaces stock on all Big Twin rubber mounted engines. The mount plate is of black finish billet aluminum with a orange 70 durometer polyurethane bushing assembly. Fits:FLT...

Urethane ISO mount replaces stock on all Big Twin rubber mounted engines. The mount plate is billet aluminum with a polyurethane bushing assembly.The formulated compounds enhance compression and...

Urethane ISO mount replaces stock on all Big Twin rubber mounted engines. The mount plate is of black finish billet aluminum with a polyurethane bushing assembly.The formulated compounds enhance...

Chrome alternator plug retainer bracket bolts to the front left engine mount bolt and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...