Sportster XLH 883 Standard

Kit includes upper and lower bearings, seals, retaining rings, dust covers, washers, screws, and damper seals.Kit includes bushings. Fits:FXD 1991-2005FXR 1987-1994XL 1988-2014Additional Information

Chrome narrow glide conversion triple tree kit allows the use of 41mm fork tube on models listed. Includes upper and lower trees, stem, stem nut, fork stops, 3/4" axle, axle spacer and fender spacers...

Feature high tensile strength wire construction with ground ends.Set of two. Fits:XL 1987-1994FXR 1988-1994Additional Information OEM No.4

Replica chrome forged aluminum top triple tree for 39mm fork tubes.Gauge bracket mount holes are 5/16 x 18" thread with 10.5cm center to center. Center to center distance of fork tube is 180cm in...

V-Twin - 24-0863 - 39mm E-Z Fill Fork Tube PlugDescriptionE-Z fill fork tube top plug 39mm feature small oil fill cap built into fork tube top plug. Small oil fill cap allows fork oil change or fill...

Aluminum lower triple tree accepts 39mm fork tubes.*NOTE: Fork stem is internally threaded to accept cap/stud nut. Requires two 3/8-16 x 1-3/4" pinch bolts allen screws, not included. Fits:FXR...

V-Twin - 24-0841 - 39mm Chrome Fork BraceDescriptionChrome fork brace is a four piece design, that goes on top of the lower leg, for easy installation on 39mm forks. Fits:FXD 1991-2005XL 1988-UPFXR...

V-Twin - 24-0787 - Fork Damper Tube Screw and WasherDescriptionFork damper tube screw with washer for Showa forks, FXWG and FXS models.Sold as a pair. Fits:FX 1975-1984XL 1979-UPFXR 1982-1994XL...

V-Twin - 24-0786 - Fork Damper Tube ScrewDescriptionShowa fork damper tube screw only Fits:FX 1975-1984XL 1979-UPFXR 1982-1994FXD 1991-2017FLST 1986-2005FL 1977-1984FXST 1984-2005FX 1980-1986Additi

Fat kid style fork assembly include chrome top tree, black lower triple tree with chrome sliders and axle kit. Fits:XL 1982-2003Additional Information UOM

Fat kid style fork assembly include chrome top tree, black lower triple tree with polished sliders and axle kit. Fits:XL 1982-2003Additional Information UOM<

V-Twin - 24-0676 - 39mm Fork Tube Damper Ring NylonDescriptionNylon ring for fork tube damper. Fits:FXR 1987-1994XL 1987-UPAdditional Information

V-Twin - 24-0624 - Dust Shield Lower ChromeDescriptionChrome lower dust shield. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR 1982-1984FXR 1985-1994FLST 1986-UPXL 1982-2003FLT 1979-UP<

V-Twin - 24-0618 - Upper Triple Tree Dust Shield ChromeDescriptionUpper triple tree dust shield features a chrome finish. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR 1982-1984FXR...

Lower fork damper tube stop is for XL and FXR models.Sold as a pair. Fits:FXR 1988-1994XL 1988-1994Additional Information OEM No.45463-87<

Replica Fork Damper Tube is for all 39mm XL except for Huggers.Sold as a pair. Fits:XL 1988-1993FXR 1987-1994FXD 1991-1994Additional Information

V-Twin - 24-0335 - Chrome Top Fork Tube Plugs without HoleDescriptionChrome top fork plugs without hole is for 39mm. Plug has a flat top.Sold as a pair. Fits:XL 1988-UPFXD 1991-2017FXR...

Kit includes a chrome cup set, bearing set, dust shields, and a longer fork stem and adapter.The longer fork stem and adapter fits the neck but will not accept stock fork stem lock. This has a built...

Upper fork slider bushing set is 39mm.Sold as a pair. Fits:FXD 1991-2005FXR 1988-1994XL 1988-1994Additional Information OEM No.45

V-Twin - 24-0181 - 39mm Fork Slider Lower Bushing SetDescriptionLower fork slider bushing set is 39mmSold as a pair. Fits:FXD 1991-2005XL 1988-UPFXR 1988-1994Additional Information

Kit includes brackets and adjustable round body damper piston. Fits:XL 1988-2003Additional Information UOM1 - KIT

Street tough fork springs 39mm are made using drawn spring wire.Eliminates front end sag, reduces nose dive under braking and improves stability. Sold as a pair. Fits:FXR 1987-1991XL...

20th century fork spring lowering kit for Showa forks have progressively wound springs that resist bottoming out and features high quality and performance. Kit includes springs, spcers and hardware...

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

39mm fork tube assembly features a hard chrome finish. Fork tubes measure 23-3/8" overall length with internal damper rods and assembled spring forks. Top caps are included. Seal kit is supplied for...

Kit comes with boot covers and dust seals. Fits:FXD 1991-2005FXR 1987-1994XL 1988-2005Additional Information UOM1 - KIT

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Fork tube set is stock length 23-3/8".Before installing, compare new and old tubes. Be sure the stock top plug threads it into the new fork tubes. Sold as a pair. *NOTE:...

V-Twin - 23-9173 - Brake Rod Plunger EndDescriptionZinc brake rod plunger end. Fits:FXR 1987-1994 Late 1987XL 1987-UPFXR 1982-1987 Early 1982Additional Information

Chrome rear caliper bracket for 1987-1999 calipers.The mounting holes measure 4-1/4" center to center. Fits:XL 1987-1999 Late 1987Additional Information OEM

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Mount stud for sprocket cover and also for mounting footpeg. Fits:XLH 1986-1990Additional Information OEM No.34886-86A

Rear brake pedal pivot stud with a zinc finish. Fits:XL 1980-1990Additional Information OEM No.42441-80 UOM

V-Twin - 23-2012 - Rebuild Kit for Rear CaliperDescriptionThis rebuilt kit includes all necessary hardware, piston and seal kit for a full caliper overhaul. Fits:FLT 1987-1999FXD 1991-1999FXR...

V-Twin - 23-1986 - Brake Rod Plunger EndDescriptionBrake rod end with pin and is 5/16" X 24 thread. Fits:XL 1987-UP Late 1987FXR 1987-1994 Late 1987Additional Information

Brake pedal kit features a polished finish.Kit includes a long brake clevis pin zinc plated, brake pedal pivot shaft, brake pedal cylinder plunger, polished brake pedal with busing and a hex jam nut...

Natural rear remote mount master cylinder is designed to mount in a variety of locations where standard assemblies cannot.This master cylinder has one milled side with ridges and features a 5/8" bore...

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a polished finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...