Softail Custom FXSTC

Fork tubes are 20-7/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plugs thread into the new fork tubes. Sold as a pair. *NOTE:...

Fork tubes are 24-1/4" stock length.Tube set is stock FXST length but would be an extended length if used on FLST. Set of two. Before installing, compare old and new tubes. Be sure the stock top plug...

V-Twin - 24-0011 - Fork Drain ScrewsDescriptionFork drain screws are supplied with washers and are sold in pairs. Fits:FL 1976-1984FLST 1986-2005FLT 1979-UPFXST 1984-2005Additional Information

Black 41mm adjustable triple tree kit includes fork plugs, lower adjustable tree and top tree with pivot bolts. Kit features 2 adjustable positions with a 12" rake in the raked position.Lower triple...

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Rear brake master cylinder reservoir features a die-cast aluminum construction with ribbed accents and the sight glass installed in an black finish.Accepts OEM style cover, gasket and mounting...

Chrome rear pushrod clevis plunger. Fits:FXST 1987-1999 Late 1987Additional Information OEM No.42522-87A UOM

Mid brake pedal mount plate for Softail mid control shifter kit.Require to use with 1/4-20 X 2-1/2" allen cap screw and spacer 5/16" x 1/2" x 1/2". Fits:FXST 1986-2017FLST 1986-2017Additional...

V-Twin - 23-2012 - Rebuild Kit for Rear CaliperDescriptionThis rebuilt kit includes all necessary hardware, piston and seal kit for a full caliper overhaul. Fits:FLT 1987-1999FXD 1991-1999FXR...

Remote rear master cylinder mount features a zinc finish. For use on Softail right and left mid control kit to mount remote master cylinder.Bolts to rear exhaust mount holes (2) 3/8" x 16 mount holes...

Black spike style brake pad with 45.5mm width for pedal installation. Fits:FXST 1985-2017Additional Information UOM1 - EA

Zinc rear brake plunger for Softail mid control brake kit. Fits:FLST 1986-1999FXST 1986-1999Additional Information UOM1 - EA

Polished stainless steel 11-1/2" front brake disc is a 5-spoke style.This disc accepts the center ring and washers. Fits: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 XL 1984-1999 FXR 1984-1994 ...

V-Twin - 23-1336 - Grate Brake Pedal Pad Small BlackDescriptionGrate style brake pedal pad is the small type featuring a black finish. Surface has raised knubs for better grip and self-cleaning...

V-Twin - 23-1329 - Grate Brake Pedal Pad Small BronzeDescriptionGrate style brake pedal pad is the small type featuring a bronze plated finish. Surface has raised knubs for better grip and...

Includes a chrome caliper with bracket, 11-1/2" Razor style right disc, Dura soft rear disc brake pad set, and chrome mount bolts. Fits:FLST 1987-1999FXST 1987-1999Additional Information

Kit includes complete chrome Replica 4 piston caliper with a one piece integral bracket, pads, and a polished stainless steel drilled 11-1/2" brake disc with chrome mount bolts. Fits:FXR...

Bolt kit is for use with front or rear universal or stock lines with 12mm hole size. Bolt is 7/16-24 with a 6 point head. Fits:FXST 1984-2010XL 1984-2003FXD 1991-2010Additional Information

Natural rear 5/8" bore master cylinder includes black cover and boot with piston.Remote master cylinder is designed to mount in a variety of locations where standard assemblies cannot. ...

Chrome billet left side rear caliper bracket is for use with a 1" axle and 11-1/2" rotor.Includes a spacer for 3/4" axle application. Bracket mount holes measure 3-1/2" center to center. Fits:FLST...

Includes a 4 piston chrome caliper, a polished stainless steel drilled 11.5" front disc, and the front disc allen screw kit.*Note: UPS may consider this part as packaged "oversize" for shipment, as...

Includes a polished stainless steel Dura disc with bolts and a chrome caliper half with brake pads.Includes hardware for left side application on 41mm forks. Fits:FXST 1984-1999FXDWG 1991-1999FLST...

Billet kit includes rear caliper with bracket and a 11-1/2" Razor style rear right disc with countersunk holes, screw, and nut set.*NOTE: Will fit a 3/4" axle. Fits:FLST 1987-1999FXST...

Chrome billet front brake caliper with bracket for left side.Caliper is for 11-1/2" rotors. For use with 39mm and 41mm forks. Fits:FXST 1984-1999FXD 1991-1999FLST 1986-1999XL 1984-1999Additional...

Chrome front left and right caliper Set. Fits:FXST 1984-1999FLT 1984-1999FXD 1991-1999FLST 1986-1999XL 1984-1999FXSTS 1988-1999FXR 1984-1994Additional Information

Chrome rear brake pedal. Fits:FXST 1984-1999FX 1983-1983Additional Information OEM No.42515-82 UOM

Polished stainless steel front disc set with a 5 spoke design.Accepts the washers only for front application. Fits: FXST 1984-1999 FLST 1986-1999 FXD 1991-1994 XL 1984-1999 FXR 1984-1994 ...

Rear caliper kit includes a chrome rear caliper, a chrome Softail rear caliper bracket, an 11-1/2" drilled rear brake disc, a vibration shim for brake pad and a disc allen bolt set. Fits:FXD...

Kit includes 5/8" bore master cylinder, clutch handle with clamps, and two pair of switch housings. Fits:XL 1984-1995FXST 1984-1995FLST 1986-1995FXD 1991-1995FXR 1984-1994Additional Information

Replica kit includes mounting bracket, lever, and linkage. Features tab with square hole that uses spark plug.Order master cylinder separately. ...

Chrome shifter control kit with splined shifter arms use the existing components on the shifter mechanism.Allows the use of footpegs and 1 down and 3 up shifting pattern. Order complimenting forward...

Replica chrome shifter control kit includes heavy duty shifter bracket, shifter lever, rod, rubber shift peg, foopeg and inner lever. Fits:FXST 1985-1989Additional Information

Chrome jockey foot clutch kit includes chrome pedal mount bracket, black cable, lever arm, pedal lever and shifter cats paw peg.The footpeg position on this kits is FXST height. *NOTE: Frame mount...

This kit is designed for Softail models with floorboard-style mounts and includes a bracket with a tab to accept a footboard mount stud. While it can be adapted to footpeg setups, additional...

Jockey pedal cable kit includes a stainless steel pedal, zinc mount plate and black cable bracket.Fits 5 or 6 speed transmission models with a cable operated clutch. Shorty control set, pedal...

Jockey clutch control kit is for use with 5 & 6 speed models. Kit features a natural cast stainless finish. Fits:FLST 1987-1999FXST 1987-1999Additional Information

Daniel Boone chrome shifter pedal without rod for left side mounting. Accepts stock kickstand assembly. For 4 or 5 speed application.NOTE: Rod not included, order separately. Fits:FXST 1984-1999FLST...

Rear brake caliper kit includes caliper, mount bracket, curved license plate mount and spacer for right side.For use on 3/4" or 1" axle. Fits:FLST 1987-1999FXST 1987-1999Additional Information

Black jockey slap stick shifter kit includes a cable, handle, rocker clutch, spacer and bracket to attach to jockey cable. Fits:FXST 1989-1999Additional Information