Softail Springer FXSTS

Replica 21" x 2.15" single disc front wheel with chrome rim, 40 chrome hub with 3/4" bearing, stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE:...

Wheel features a Replica 16" x 3.00 drop center rim, a chrome hub with 3/4" bearings, and polished 40 stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks...

16" x 3.00" rear wheel assembly features a chrome rim, 40 stainless steel spokes, chrome hub with internals.*NOTE: 32mm on the pulley side, valve stem side. 27mm offset on the disc side. **NOTE: All...

These rear wheel assemblies start with a 40 hole 18" x 4.25" chrome rim, 40 chrome spokes and a rear hub with internals. Accepts a 130-140 tire size.NOTE: All spokes on wheel need to be inspected and...

Chrome rear wheel features a 16" X 3.00" chrome rim with small center hole for valve stem, chrome hub with internals, and 40 stainless steel spokes.The flange of the hub measure 7" between each...

16" x 3.0" rear wheel assembly includes an aluminum chrome hub, a chrome profile smoothie rim and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front 21" x 3.25" wheel assembly features a chrome hub with all internal bearings installed, 40 spokes, and a chrome rim laced and trued.NOTE: All spokes on wheel need to be inspected and re-torqued...

Features a Replica 21" x 3.25" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE: All spokes on wheel...

Features a Replica 23" x 3.00" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.If you would like your bike to shine this spring and give it a new life, check out our chrome 23" x 3...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Chrome rear wheel features a 16" X 3.00" chrome rim with small center hole for valve stem, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE:...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 40 stainless spokes.Wheel is laced and trued. **NOTE: All spokes on wheel need...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 40 chrome spokes.Wheel is laced and trued. **NOTE: All spokes on wheel need to...

Features a Replica 18" x 2.50 drop center rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to Spring Forks. ...

18" X 2.50" rear wheel assembly has a chrome rim, 40 spokes and hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. Fits:FXRS...

Features a Replica 21" x 2.15" drop center rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to Spring Forks. Features notch for...

Wheel features a 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE: 32mm on the pulley side, valve stem side. 27mm...

Wheel features a Replica 16" x 3.00 chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks. This wheel has a side...

Features a Replica 21" x 2.15" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Rim has a rolled edge design for added strength. Single disc wheel is assembled and ready to directly...

Engine bar features 1-1/4" tubing.This engine bar is not for use with extended forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Raw steel hardtail rear frame section has replica forged axle plates for the exact look of the 1950's rigid frames. Accepts FXST oil tank, transmission mount plate and electric start.Hardtail for...

Left side caliper frame mount bracket for right side drive motorcycles must be welded on. Bracket is for rigid frames when mounting brake units. Fits:FLST 1987-1999FXST 1987-1999Additional Information

Big Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck. *NOTE: This frame neck does not include Manufacturer's...

Softail top frame plate features a raw steel finish, to match with seat area plate on 1986-1999 Softail original frames.For Hardtail installation. *NOTE: Align with the (2) 1/4" holes in plates. ...

V-Twin - 50-1910 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:FXST 1984-1999FLST 1986-1999 Except...

Chrome front fender mount kit attaches fender to original style assembly. Fits:FXST 1984-1993Additional Information UOM1 - KIT

Rear fender kit includes steel fender, Replica chrome struts , chrome license plate bracket, and tail lamp with hardware.We suggest pre fitting the fender prior to painting. ...

Rear shorty fender features a primer finish. For Softail models.Fender does not includes tail lamp mount. Fits:FLST 1986-1999FXST 1986-1999Additional Information

Drag Specialties - DS289053 - Air Cleaner Support Bracket Kit - '84-'89 Big TwinFeaturesCan be used in conjunction with most breather kits (where applicable)All gaskets and mounting hardware...

Drag Specialties - DS243886 - FL-'68-'84 Style 2240:60 Speedometer - Black FaceFeaturesQuality 5” speedometer heads are available in 2240:60 ratiosFeatures 12 mm thread and comes with a gasketMileage...

Drag Specialties - DS243877 - FL-'36-'40 Style 2240:60 Speedometer - White FaceFeaturesQuality 5” speedometer heads are available in 2240:60 ratiosFeatures 12 mm thread and comes with a gasketMileage...

Drag Specialties - DS243884 - FL-'62-'67 Style 2240:60 Speedometer - Black/White FaceFeaturesQuality 5” speedometer heads are available in 2240:60 ratiosFeatures 12 mm thread and comes with a...

Drag Specialties - DS190869 - Bolt Kit - Complete Motor - Knurled/Socket-Head - '89-'93 SoftailFeaturesIncludes all necessary bolts to hold the engine togetherMade in the USASpecs

Drag Specialties - DS190373 - Bolt Set - Transmission - Button-Head - '89-'95 SoftailFeaturesReplacement hardware for mounting the transmissionMade in the USASpecs

Drag Specialties - 78050012 - Regulator Cover - Chrome - '89-'99 FXST/FLSTFeaturesStamped steel cover fits over the existing regulatorIncludes chrome mounting hardwareReplacement Part for OEM...

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24020073 - Head Bolt Covers - Chrome - 4 PackFeaturesPolished and buffed to a mirror-like finishQuality chrome plated steel bolt coversMade in the USASpecs

Drag Specialties - 21130780 - Battery - YTX20HBSFTFeaturesSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology delivers higher...

Drag Specialties - 21121204 - 32A Charging Kit - Black RegulatorFeaturesKit includes an encapsulated magnetic rotor, precision-wound stator and an 89-99 32A chrome voltage regulatorFeatures a thick ...

Drag Specialties - 21121063 - Regulator - BT '89-'99 - ChromeFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...