1990

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A.

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to...

Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models Features: Use to install inner cam bearings Made in the U.S.A.

Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to re

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 35820-86 Transmission Gear Spacing Tool fits '86-'90 Sportster, '87-'90 Buell Models Features: Used to align main and countershafts when checking proper gear spacing Made in the U.S.

Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length H

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of inj

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide...

Custom Cycle Engineering - 39 mm Ultra Chrome Fork Tubes fits '99-'05 FXDC/​FXDL/FXD & '87-'07 Sportster Models (Except XL1200S, '00-'05 FXDX/​FXDXT (OEM #45360-90)) Features: Designed to fit a...

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Drag Specialties - Chrome Rear Master Cylinder fits 'L87-'03 Sportster Models (OEM #42453-87, 42456-87C) Features: Complete rear master cylinder assembly Polished and chrome-plated

Colony - Fork Drain Screws fits '94-'98 FXD, '84-'94/'99-'00 FXR Models (OEM #45790-80, 45996-73) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - 9876-2 Chrome Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA

Drag Specialties - Sissy Bar Side Plates fits '79-'85 Sportster Models - Chrome Features: Side plates feature raised accent on select applications Easy, bolt-on design - no drilling required

Drag Specialties - Sissy Bar Side Plates fits '86-'99 FLSTC/N, '90-'99 FLSTF Models - Chrome Features: Side plates feature raised accent on select applications Easy, bolt-on design - no drilling...

Drag Specialties - Sissy Bar Side Plates fits '82-'00 FXR Models - Chrome Features: Side plates feature raised accent on select applications Easy, bolt-on design - no drilling required

Drag Specialties - Sissy Bar Side Plates fits '84-'99 FXST, '80-'86 FXWG Models - Chrome Features: Side plates feature raised accent on select applications Easy, bolt-on design - no drilling...

Pro-One - Pro Board V2 Floorboards - fits '84 & Up FLH/FLHT, '86-'17 FLST Features: Include traditional BMX style traction pins that provide fantastic grip Thin tapered design for additional...

Drag Specialties - 54-3/4" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38699-04) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a...

Slyfox - Billet Aluminum Mini Floorboards fits Harley Touring Models These mini floorboards are perfect for your passenger of your Harley Davidson Touring Model, or can be used on other Harley...

Drag Specialties - 14½" Shift Linkage fits Custom Applications - Chrome The rod length of this shifter linkage is measured from the center of the hole to the center of the stud with the adjusters...

Drag Specialties - 12½" Shift Linkage fits '86-'17 Softail Models (Exc. '97-'99 Softail Heritage Springer Models) The rod length of this shifter linkage is measured from the center of the hole to...

Feuling - Headbolt Kit fits '99-'17 Twin Cam and '92-'22 Sportster Models (exc. '21-'22 Sportster S/RH1250S, 22 Nightster/RH975) This kit features wide underhead flange bolts and hardened chamfered...