1991

Starter solenoid end plate features a chrome finish and includes mounting hardware. Fits:FXD 1991-1999FLST 1991-1999FXST 1991-1999Additional Information

Turn signal canceler automatically shuts off turn signal if left on. Canceler is good for stock replacement or custom projects. Fits:XL 1991-1992FLST 1991-1995FXST 1991-1995FXD 1991-1995FLT...

V-Twin - 32-2359 - Kwick-Start Lever Assembly BlackDescriptionBlack Kwik-start lever kit includes a one piece cast housing.Includes three M4-0.7 x 15mm stainless steel screws, push buttom...

V-Twin - 32-2358 - Kwick-Start Lever Assembly ZincDescriptionZinc Kwik-start lever kit includes a one piece cast housing.Includes three M4-0.7 x 15mm stainless steel screws, push buttom...

V-Twin - 32-2357 - Kwick-Start Lever Assembly ChromeDescriptionChrome Kwik-start lever kit includes a one piece cast housing.Includes three M4-0.7 x 15mm stainless steel screws, push buttom solenoid,...

V-Twin - 32-2150 - V-Fire Starter Button BlackDescriptionV-Fire Starter Button features a black finish with extended knob. Starter button is a press start to engage starter. Mounts as original cover...

V-Twin - 32-2069 - V-Fire Starter Button ChromeDescriptionV-Fire starter button features a chrome finish with extended knob. Starter button is a press start to engage starter. Mounts as original...

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-2046 - V-Fire Starter Button Wrinkle BlackDescriptionV-Fire starter button features a wrinkle black finish with extended knob. Starter button is a press start to engage starter. Mounts as...

V-Twin - 32-1916 - Stick Starter LeverDescriptionStick starter lever. Fits:FXST 1989-UPXL 1991-UPFLST 1989-UPAdditional Information

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

V-Twin - 32-1905 - Battery Cable Set BlackDescriptionFour gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 2 cables. Includes extra red shrink tubing and...

Four gauge battery cable set features a black finish with tinned copper strands.Sold as a set of 2 cables. Includes extra red shrink tubing and features 1/4" and 5/16" terminals. Fits:XL...

Magneto gear kit. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

Magneto rotor with shaft. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

V-Twin - 32-1830 - Stick Starter Lever Base ZincDescriptionStick starter lever base one design is zinc plated. Fits:FXST 1989-UPXL 1991-UPFLST 1989-UPAdditional Information

Battery cable is a #2 gauge 10" ground strap. Fits:FXST 1987-1995Additional Information UOM1 - EA Manufacturer

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Magneto drive gear set is for use with Burkhardt magneto drive assemblies. Fits:FL 1970-1992Additional Information UOM1 - SET

Main wiring harness kit features plastic wire in original factory color codes, with all terminals applied in vinyl loom.Handlebar and tail lamp wiring must be purchased separately. Fits:FXRS...

Builders wiring harness for FXST includes all correct color coded high tension wires, handlebar wires and tail lamp wires for application. Fits:FLST 1991-1995FXST 1991-1995Additional Information

Ignition switch wiring harness features plastic wire in original factory color codes, with all terminals applied, in vinyl loom.Features 12 holes and includes 11 wires. Fits:FLST 1989-1995FXST...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Replica hydraulic brake switch with flag features heavy duty contact and quality brass terminals. This will retro fit to earlier models. Fits:FXST 1984-2003FXD 1991-2003XL 1984-2003FLST 1986-2003FLT...

M horn wire. Fits:XL 1986-1991Additional Information OEM No.70195-86 UOM1 - EA

Battery cable boot fits cable end at battery terminal. Sold as a pack of five. Fits:FXST 1991-1993Additional Information OEM No.70578-89 <

Battery cable for ground on FXST, FLST and positive on FXR.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FXR 1993-1994FLST 1989-2007FXST 1989-2007Additional...

Battery cable for ground.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FXD 1991-1995Additional Information OEM No.<

Battery cable for positive on battery terminal.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FXD 1991-1995Additional Information

Battery cable measures 31-3/4" long for positive terminal on battery.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FLT 1989-1992Additional Information <

Battery cable measures 8-1/2" long. Cable is 4 gauge with 17/64" and 11/32" hole sizes with heat shielded terminal ends.Cable is braided. Fits:FXR 1987-1994FLT 1982-1992Additional Information

Battery cable is 6 gauge with 3/8" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for positive post on 1982-1984...

Chrome lower triple tree cover is for the area on the lower tree below headlamp Fits:FXST 1986-1993Additional Information OEM No.67773-80A

Zinc crash bar adapter bracket. Fits:FXST 1984-1999FX 1972-1984Additional Information UOM1 - EA Measu

Rear 3-1/2" long threaded stud is hollow for wiring.. Fits:FXR 1987-1994Additional Information OEM No.68493-87

V-Twin - 31-9974 - 9 inch Chrome Rear Turn Signal MountDescriptionChrome 9" rear mount bar for FL and FLST models. Thread pitch is 1/4"-20.Rear turn signal mount measures 6-7/8" center to center...

V-Twin - 31-9935 - Front Turn Signal Relocation KitDescriptionChrome front relocation kit will move turn signals to post mounted to top of triple tree. Chrome mount posts, wiring and hardware,...

V-Twin - 31-9929 - 10 inch Chrome Turn Signal Mount RearDescriptionChrome 10" rear mount bar.The distance across the holes center to center measures 5-7/8". Fits:FLHTC 2009-2013FL 1974-1984FLHR...