1994

 Drag Specialties 6" Buffalo Billet Aluminum Handlebar Risers - Chrome Features: Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compliment the style of...

Burly Brand Slammer Plus Shocks - fits '80-'23 FLH/FLT The Slammer Plus Shocks will give you a little extra cushion and will provide more travel then most lowered shocks.They sit at a Ride Height of 10.5” by utilizing a flat wire spring coupled...

Dunlop D402 MH90-21 Front Tire The D402 by Dunlop is a touring/cruiser tire co-branded by Harley-Davidson made in the USA, made for use with Touring models and Cruisers. This tire is built with a 3-ply polyester casting with two fiberglass belts...

Drag Specialties 2.4" Mini Mechanical KM/H Speedometer fits Harley-Davidson XL Models 1991-1994 Features: Available with a black translucent face Water-resistant, vibration-resistant with chrome or black housing Select styles have odometer, trip...

Drag Specialties Springer Forks for Harley Models in Chrome or Black The Drag Specialties Springer Forks were designed for Harley Softail, Sportster, and FXR models. The springer front ends will give your motorcycle that classic chopper look. Made from...

Bassani Road Rage III 2-into-1 Exhaust System for Dynas Bassani came up with this upswept, custom looking exhaust that sounds as mean as it looks. These pipes are made with an advanced inner collector to promote maximum performance and are extremely...

Mustang Fastback Seat The fast back seat is comfortable and provides riders with good back support. It is a quality seat with a low profile style. Features: Offers a super-clean, custom style, cut low for the rider with good back support Offers a...

The Memphis Shades Trigger-Lock Mount Kit is an on and off without tools mounting system for the Memphis Shades Gauntlet Fairings. See chart for fitment. Fitment: YearMakeModel 2015 - 2017 Harley-Davidson XG 500 - Street 500 2015 -...

Drag Specialties - Knurled Hotop Designs Footpegs: Features: Features die-cast construction Knurled black nylon insets for style and durability for all-day riding These unique male mount footpegs are only available from Drag Specialties NOTE:...

V-Twin Z Style Handlebars - Chrome 1" Harley Davidson Chrome 1" Z Style Handlebar 4" Rise Chopper Bobber Custom Features:  Chrome 1" handlebar are Z style that feature early chopper styling with indents. Handlebars do not have knurls...

Colony - Ignition Cover Timer Stud Kit fits '80-'99 Big Twin, '80-'85 Sportster Models (OEM #32601-80, 32606-82) Features: Reproduction of original ignition timer cover studs Made in the U.S.A. Fitment 2002-2003 Harley-Davidson 883...

Colony - Rear Master Cylinder Mounting Kit for '87-'99 FXST/​FLST (OEM #42301-87) Features: Includes zinc-plated stud, bolt and washers Fitment 1999 Harley-Davidson Softail Night Train...

Combustion Industries - 24" Harley Wanderlust Standard Rack Sissy Bar fits '94-Up Sportster, '12-Up FLSL, & '18-Up FXBB/ FLDE/ FLHC/ FXST M8 Softail Models - Gloss Black Easily secure your gear with the Combustion Industries sissy bar. The bracket...

Memphis Shades - 9/16" Open Side Deep Socket Auxiliary Lights Adjustment Tool fits FLHR/FLHRC  Models Features: An open side deep socket for moving the auxiliary light forward Fitment: 2017-2020 Harley-Davidson Road King Special...

V-Twin - Black Rear Motor Mount fits '91-'98 Dyna Models OEM #47564-90B Replacement rear motor mount for 1991 to 1998 Harley Davidson Dyna models. Fitment FXD 1991-1998

Drag Specialties - 66-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) W/ 32-15/16" Clutch Adjuster - Alternative Length Features: Cables feature chrome fittings, black vinyl...

Drag Specialties - Rear Caliper Rebuild Kit fits '87-'99 H-D Models (Repl. OEM #43946-86) Features: High-quality replacement components Fitment 1999 Harley-Davidson FXR 2 - - 1999 Harley-Davidson Softail Night Train...

Joker Machine - Finned Billet Inspection Cover fits '70-'06 Big Twin Models  The Joker Machine Finned Billet Inspection Cover is available in three different finishes: Chrome, Black/Silver or Black Features Includes mounting hardware Made in...

James Gaskets - Primary Gasket, Seal & O-Ring Kit W/ Foamet® fits '94-'06 Softail & '94-'05 Dyna Glide Models This kit features top-quality gaskets, seals and O-rings that meet or exceed OEM specifications. Features Primary gasket...

LA Choppers - County Shifter fits '91-'17 Dyna Models This shifter is a precise replacement for the stock shifter that works with mid controls. Available in your choice of a black or chrome finish. Please Note: These shifter arms will require using a...

V-Twin - Polished Replica Rear Fender Strut Set fits '87-'94 FXR Models This replica rear fender strut set has a polished finish. Fitment FXR 1987-1994

Hard Drive - Gripmax Footpegs - Black These footpegs are lightweight, sturdy, and feature an adjustable angle for the perfect fit and comfort. They are machined from 6061 aluminum. Features Dimensions: 3.5" x 2.7"

Drag Specialties - 2.25 Gallon Rubber-Mount Gas Tank fits '86-'64 Sportster Models NOTE: When this gas tank is installed on 92 and later models and the Original Equipment continuous venting system is eliminated or disconnected, you may not reuse your...

Saddlemen - Unknown Step Up Seat fits '79-'03 Sportster Models Features Often imitated; never duplicated. The original Harley-Davidson stunt seat. Saddlemen seats with GELcore Technology are the only motorcycle seats scientifically proven to...

Biltwell - Tyson 1" Slotted Handlebars - 14" Height These Tyson 14" Slotted Handlebars from Biltwell feature a 12" end rise, a 30½" width, a 3½" center width and a 2¾" pullback. They are available in your choice of a chrome or black...

Biltwell - Tyson 1" Slotted Handlebars - 12" Height These Tyson 12" Slotted Handlebars from Biltwell feature a 12" end rise, a 30½" width, a 3½" center width and a 2¾" pullback. They are available in your choice of a chrome or black...

Arlen Ness - Fusion Male-Mount Air Trax Footpegs The Arlen Ness Footpegs will provide riders with traction, style, and comfort. Features: The perfect fusion of traction, style and comfort Footpegs are machined from billet aluminum and wrapped in...

Drag Specialties 5.5" Buffalo Billet Aluminum Pullback Handlebar Risers - Black Features: Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compliment the...

Drag Specialties 10" Buffalo Billet Aluminum Handlebar Risers - Chrome Features: Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compliment the style of...

Drag Specialties 3" Buffalo Billet Aluminum Handlebar Risers Features: Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compliment the style of 1-1/4"...

Cobra El Diablo 2-into-1 Exhaust fits Harley-Davidson 83-06 Sportster Models The Cobra El Diablo 2-into-1 sounds as mean as it looks. If you're looking to increase horsepower on your Harley, look no further. Using equal length headers with a megaphone...

Arlen Ness - Method Fork Braces fits '06-'17 FXD, '88-'94 FXR, '00-'18 XL Sportster Models The Arlen Ness Method Fork Braces are machined from tough aluminum, making them durable. These are designed to eliminate flex in your fork assembly. These are...

Thrashin Supply - Bagger Passenger Floorboards fits '86-'23 Big Twin Models The Thrashin Supply Co. Driver Floorboards are made from 6061 aircraft grade aluminum, making them tough and durable. The floorboard is completely knurled providing ultimate...

Todd's Cycle - Shooter Mirrors - Chrome or Black Todd's Cycle Shooter mirrors are CNC machined aluminum making them super durable. They are available in chrome or black and for the left or right side. These round mirrors are simple and wont take away...

Racing Bros - Bazooka Preload/Rebound Adjustable Rear Shocks - fits '84 & Up Touring Models The Bazooka Rear Shocks will enhance your riding experience with it's Racing Bros' race proven SAV damping system. They will provide riders with superior...

Harley Davidson FLT Rear Axle Kit fits 1986-1999 Rear axle kit includes 12-1/2" bearing surface length axle with 3/4" outer diameter. Fitment: FLT 1986-1999 Measurements: Bearing Surface - 12-1/2" Surface w/o Thread - 11-1/4" Overall Length...

Burly Brand - Slammer Suspension Lowering Kit fits '88-'03 Sportster Models - Chrome This is a complete lowering kit which comes with 10.5" shocks with chrome springs and covers (unless noted) and fork springs. Features Easy-to-install fork springs...

Bassani Road Rage 2-into-1 Exhaust Systems Stepped headers merge into a true reverse-cone megaphone muffler 1 3/4" headpipes steps upt to 1 7/8" into the collector to increase flow and improve performance 4" muffler body with billet end...

Fits: HD shift levers with 5/16″-24 thread All aluminum with extra fine knurling, won’t damage footwear May also be custom fit as brake peg on some models  

Burly Brand - Slammer Shocks fits '88-'03 Sportster Models These Slammer Shocks are made famous by the Burly Slammer Suspension kit, but are now available on their own. Available in your choice of a black or chrome finish. Features Stubby 10.5"...