Softail Springer FXSTS

18" X 2.50" rear wheel assembly has a chrome rim, 40 spokes and hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. Fits:FXRS...

Features a Replica 21" x 2.15" drop center rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to Spring Forks. Features notch for...

Wheel features a 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE: 32mm on the pulley side, valve stem side. 27mm...

Wheel features a Replica 16" x 3.00 chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks. This wheel has a side...

Features a Replica 21" x 2.15" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Rim has a rolled edge design for added strength. Single disc wheel is assembled and ready to directly...

Engine bar features 1-1/4" tubing.This engine bar is not for use with extended forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Raw steel hardtail rear frame section has replica forged axle plates for the exact look of the 1950's rigid frames. Accepts FXST oil tank, transmission mount plate and electric start.Hardtail for...

Left side caliper frame mount bracket for right side drive motorcycles must be welded on. Bracket is for rigid frames when mounting brake units. Fits:FLST 1987-1999FXST 1987-1999Additional Information

Big Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck. *NOTE: This frame neck does not include Manufacturer's...

Softail top frame plate features a raw steel finish, to match with seat area plate on 1986-1999 Softail original frames.For Hardtail installation. *NOTE: Align with the (2) 1/4" holes in plates. ...

V-Twin - 50-1910 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:FXST 1984-1999FLST 1986-1999 Except...

V-Twin - 50-1088 - Front Fender Mount Kit ChromeDescriptionChrome front fender mount kit includes acorn nuts. Kit attches fender to original style assembly. Fits:FXST 1994-UPAdditional Information

Rear fender kit includes steel fender, Replica chrome struts , chrome license plate bracket, and tail lamp with hardware.We suggest pre fitting the fender prior to painting. ...

Rear shorty fender features a primer finish. For Softail models.Fender does not includes tail lamp mount. Fits:FLST 1986-1999FXST 1986-1999Additional Information

Drag Specialties - 78050015 - Clutch Pushrod End - Big TwinFeaturesStamped steel constructionIncludes oil slingerFor use with mechanical clutchesReplacement Part for OEM Number(s):3706990Specs

Drag Specialties - 78050012 - Regulator Cover - Chrome - '89-'99 FXST/FLSTFeaturesStamped steel cover fits over the existing regulatorIncludes chrome mounting hardwareReplacement Part for OEM...

Drag Specialties - 24020162 - Cover - Bolt - Deep - Hex - BlackFeaturesDesigned to fit stock-style, 3/4" front axles with 7/8" head and 1/2" hex nut (3/4" wrench size)Attach with silicone (silicone...

Drag Specialties - 24020073 - Head Bolt Covers - Chrome - 4 PackFeaturesPolished and buffed to a mirror-like finishQuality chrome plated steel bolt coversMade in the USASpecs

Drag Specialties - 21121204 - 32A Charging Kit - Black RegulatorFeaturesKit includes an encapsulated magnetic rotor, precision-wound stator and an 89-99 32A chrome voltage regulatorFeatures a thick ...

Drag Specialties - 21121063 - Regulator - BT '89-'99 - ChromeFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...

Drag Specialties - 21121062 - Regulator - BT '89-'99 - BlackFeaturesFully assembled in the USA with domestic made electrical boardsTested three different times during the assembly process to ensure...

Drag Specialties - 21120927 - Regulator Mount - Harley Davidson - BlackFeaturesAllows the regulator to be mounted down and back out of sightOptional 10-24 holes on back of mount for ground wireMade...

Drag Specialties - 21120783 - Regulator - Black - '89-'99 Evolution Big TwinFeaturesHigh-reliability 12 V voltage regulators feature rugged aluminum alloy constructionProvides accurately regulated...

Drag Specialties - 21120779 - Regulator - Chrome - '89-'99 Evolution Big TwinFeaturesHigh-reliability 12 V voltage regulators feature rugged aluminum alloy constructionProvides accurately regulated...

Drag Specialties - 21101069 - Jackshift Rebuild KitFeaturesReplacement bolt kit for Drag Specialties starter Jackshaft kitsIncludes the bolts, washers, and springSpecs

Drag Specialties - 21100591 - Starter Drive ClutchFeaturesCome complete with bearing and drive clutchDirect OEM replacementReplacement Part for OEM Number(s):3166390Specs

Drag Specialties - 21100445 - Starter - 1.7 kW - BlackFeaturesNew (not remanufacuted) replacement unit for highly modified engines in touring bikes, featuring a permanent magnet motor coupled to the...

Drag Specialties - 21100446 - Starter - 1.7 kW - ChromeFeaturesNew (not remanufacuted) replacement unit for highly modified engines in touring bikes, featuring a permanent magnet motor coupled to the...

Drag Specialties - 21100169 - Jackshaft Kit - 9-ToothFeaturesOne-piece design jackshaft assembly delivers more torque to the primary and is more tolerant of misalignment problems, all for less money...

Drag Specialties - 21100073 - Jackshaft Kit - 10-ToothFeaturesOne-piece design jackshaft assembly delivers more torque to the primary and is more tolerant of misalignment problems, all for less money...

Drag Specialties - 21100084 - Jackshaft - Repair KitFeaturesRepair kit includes thrust washer, lock plate, spring, screw and retaining ringsSpecs

Drag Specialties - 21100037 - Outer Primary Bushing - '94-'06FeaturesQuality replacement steel bushingsReplacement Part for OEM Number(s):3344694ASpecs

Drag Specialties - 21100035 - Inner Primary Bushing - '94-'06 Twin CamFeaturesQuality replacement steel bushingsReplacement Part for OEM Number(s):3344594AFitment notes:Does not fit '06 Dyna Glide.

Drag Specialties - 21070330 - Horn Cover - BlackFeaturesReplacement horn cover for models with side-mounted hornsSpecs

Drag Specialties - 21070329 - Horn Cover - ChromeFeaturesReplacement horn cover for models with side-mounted hornsSpecs

Drag Specialties - 21070328 - Horn Cover - BlackFeaturesReplacement horn cover for models with side-mounted hornsSpecs

Drag Specialties - 21070327 - Horn Cover - ChromeFeaturesReplacement horn cover for models with side-mounted hornsSpecs

Drag Specialties - 21070053 - Horn Cover - Black with Chrome FlameFeaturesRound horn covers replace the stock "cowbell" coverApproximately 4-5/8" diameterSteel constructionSpecs

Drag Specialties - 21070046 - Round Horn Cover - Black WrinkleFeaturesRound horn covers replace the stock "cowbell" coverApproximately 4-5/8" diameterSteel constructionSpecs

Drag Specialties - 21070043 - Round Horn Cover - ChromeFeaturesRound horn covers replace the stock "cowbell" coverApproximately 4-5/8" diameterSteel constructionReplacement Part for OEM...