Touring Electra Glide Standard FLHT

Billet lower pushrod cover set features a natural alloy finish. Set fits Evolution models.Sold as a four piece set. Fits:FX 1984-1999FL 1984-1999Additional Information

V-Twin - 11-0571 - Rocker Arm Shaft SetDescriptionSifton rocker arm 4 piece shaft set for 1986-up. Fits:FLT 1984-2016FXD 1991-2017XL 1986-UPFLST 1986-2017FXST 1984-2017FXR 1984-1994Additional...

Evolution Shovelhead rocker box set accepts 1/2" x 20 end plugs. Features a natuarl cast aluminum construction with shot peened finish and cast shape readily accepts a black VHT finish.Allen screws...

Alloy lifter block set for Evolution engines. Fits:FLT 1985-1999FLST 1985-1999FXST 1985-1999Additional Information UOM1 - SET

Evolution cam cover trim feature an alloy construction. Bolts to stock cam cover on 1986-99 Big Twin models to give the early Shovelhead Flatside style, cover is natural cast for original style...

Bolt-on 4-finned cam cover kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome forged aluminum 4-finned cam cover with bushings installed, cast aluminum cam cover...

Bolt-on cam cover kit for Evolution models to give it the Retro-style 1965 Panhead look.Kit includes a replica cast cam cover flatstide style with bushings installed, cast aluminum cam cover adapter...

Cast aluminum cam cover dress up adapter trim allows use of the early retro-style Panhead cam cover to fit Evolution models.Mounts to existing nose cone cover. *NOTE: Actual cam cover not included...

Cover for Big Twin models features installed bushings and includes seal.Include hardware and gasket. Fits:FXD 1993-1999FXST 1993-1999FXR 1993-1994FLST 1993-1999FLT 1993-1999Additional Information

Oil pump check and relief valve plug with a chrome finish. Fits:FLT 1981-1998FXST 1984-1998FXR 1982-1994FXD 1991-1998FL 1981-1984FLST 1986-1998FX 1981-1984Additional Information

Chrome allen screw kit for primary cover. Fits:FLT 1985-1999FXR 1985-1994Additional Information UOM1 - KIT

Transmission shifter cover screw, allen type. Fits:FLT 1987-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999Additional Information UOM

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

Rear engine mount cover. Fits:FXR 1987-1995FLT 1987-1995Additional Information UOM1 - EA Manufacturer

V-Twin - 52-1291 - 23 inch x 3.0 Drop Center Chrome Wheel RimDescriptionFront 23" chrome drop center rim has an outside width of 3.0" with 2 flat flanges and 40 holes.The outside width measures 3.65"...

16" x 3.00" rear wheel assembly includes a chrome profile smoothie rim, steel chrome hub with 3/4" bearings installed, and chrome spokes.**NOTE: All spokes on wheel need to be inspected and...

Front 23" x 3.00" wheel assembly features chrome spokes, chrome hub, and chrome rim. This wheel comes with 3/4" bearings and fits dual disc applications.*Note: UPS may consider this part as packaged...

Front 16" x 3.00" wheel include chrome hub with internals, chrome drop center rim, and 40 chrome twirled spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

16" x 3.00" rear wheel features a chrome rim, chrome hub with internals, and 40 twirled spokes assembled.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...

Replica 16" x 3.00" rear wheel assembly features 40 chrome spokes, chrome hub with bearings, races, seals, and seal spacers, and a chrome drop center rim with small side valve stem.**NOTE: All spokes...

16" x 3.00" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Replica rear 16" x 3.00" wheel assembly features a chrome drop center rim, chrome hub, and stainless steel spoke set.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

21" x 3.25" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front 16" x 3.5" Duro 26 Fat Spoke wheel features a matte black finish and 25mm bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 3/4" bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 21" x 3.15" Duro 36 Fat Spoke cast type wheel is dual disc, and features a matte black finish with 25mm bearings.Wheel bearing adapter sleeve sets, available separately. ...

Touring torque linkage system features a black finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Touring torque linkage system features a chrome finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

Engine bar features 1-1/4" tubing, and 3 point mounting.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Engine bar features 1-1/4" tubing, and 3 point mounting.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

36" Bronx straight tail set features a chrome finish with an inner diameter of 1-7/8" and comes without baffles.Extension pipes have channel mount brackets that are welded in place. Includes channel...

Drag Specialties - 78050015 - Clutch Pushrod End - Big TwinFeaturesStamped steel constructionIncludes oil slingerFor use with mechanical clutchesReplacement Part for OEM Number(s):3706990Specs

Drag Specialties - 35011973 - Saddlebag Support Brackets - Black - FL '97-'08FeaturesHigh-quality chrome-plated finish replacements for use on most dresser modelsSet of one left- and one right-side...