1995

Adjustable gloss black sissy bar, rack with backrest and black detachable pad. Fits: XL 1994-2003 Additional Information UOM 1 - EA

Adjustable chrome sissy bar, rack with backrest and black detachable pad. Fits: XL 1994-2003 Additional Information UOM 1 - EA

3" stretched saddlebag kit includes bags, lids, face plates, locks and mounting hardware.Bags are injection molded and have a smooth inside and outside surface. Bottoms are 2" deeper in the front, 3"...

Deep style raw plastic saddlebag set includes left and right sides, lids and bottoms. Bottoms have 3" stretch and indents for muffler body on the under side with a slight curve down towards the rear...

Replica saddlebag kit is made of ABS material. Includes right and left bags with tops. Bags are unfinished.Use on FLST-FXST models 1986-Up with the use of 49-2677 and 49-2678 bracket kits. Replica...

ABS plastic saddlebag set features a black finish. The lids feature speaker cutout.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for ease of installation. The process of...

Replica saddlebag kit is made of plastic with a primed finish, ready for paint. The lids feature a speaker cutout.*NOTE: Must order gasket separately. The speaker cutout measures 7.5" x 5-1/4"...

Saddlebag kit is constructed of black ABS plastic.Lids and hardware included for the right and left sides. Fits: FLT 1993-2013 Additional Information

Saddlebag kit is features a classic white finish, painted over black ABS plastic.Lids and hardware included for the right and left sides. Fits: FLT 1993-2013 Additional Information

Metal saddlebag bracket set includes the left and right brackets with a rear saddlebag stabilizer bracket for fiberglass saddlebags.Saddlebag bracket set, bottom rail extends out 3-1/2" measuring to...

Chrome bracket set for saddlebags. Fits: FLST 1986-2005 FXST 1984-2005 Additional Information UOM 1 - SET

Set includes right and left side lids without speaker cutouts.Pre-drilled and pre-fit for ease of installation. The process of injection created smooth inside and outside surfaces. All pieces are...

Left side saddlebag is plastic with primed finish, ready for paint.Order gasket set, hinge set and lid separately. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The...

Right side saddlebag is plastic with primed finish, ready for paint.Order lid and gasket separately. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of...

Left side saddlebag lid, without speaker cutout, has a plastic primed finish, ready for paint.Order gaskets and hinge set separately. Pre-drilled and pre-fit for ease of installation. The process of...

Right side saddlebag lid, without speaker cutout, has a plastic primed finish, ready for paint.Order gasket set and hinge set separately. Pre-drilled and pre-fit for ease of installation. The process...

Wyatt Gatling saddlebag bracket kit features a chrome finish. Kit is used to mount Touring saddlebag sets to FXST, FLST models.Brackets bolt directly to fender struts on Softails. Order saddlebag...

Kit includes set of black saddlebag adapter brackets for quick release mounting, four bail head studs, four receptacles, four cushions, four grommets, and mounting hardware for the left and right...

Deep style raw plastic hinged saddlebag bottom set only. Saddlebag bottoms have a 3" stretch and are notched for muffler body on the under side.This saddlebag set is a perfect fit and has all...

Rear spring fork legs only features a chrome finish and is for use on FXST models.Fork stem is oxidized due to the plating process. *NOTE: Spring fork are measured from lower triple tree to axle...

V-Twin - 49-1989 - Front Lower Side Car Clamp SetDescriptionSide Valve lower front bracket set is the clamp on style.U-clamp not included. Requires four U-Bolts for mouting. *NOTE: Order U-Bolts...

FXSTS Spring Fork assembly is stock length and features an all chrome finish.Assembly includes shocks, axle riser, top tree, brake arm, rockers and bearings all assembled. For use with 21" wheel...

Black heavy duty construction is 15% thicker than stock for added support to prevent breakage.Mounts with stock hardware. ...

V-Twin - 49-1320 - 1936 Knucklehead Side Car Mount KitDescription1936 Knucklehead side car mount kit includes chrome cross bar and right and left cast mount. Can be welded to most frames.Mount loops...

Tour-Pak hinge kit. Fits:FLT 1987-2013Additional Information UOM1 - KIT ManufacturerV-Twin

Tour-pak latch kit. Fits:FLTRU 1987-2013FLT 1987-2013FLHT 1987-2013Additional Information UOM1 - KIT

V-Twin - 49-1283 - Tour-Pak Tether Cable KitDescriptionTour-Pak tether cable kit. Fits:FLT 1991-UPAdditional Information UOM

Saddlebag hardware kit includes small clips, hinges, face plates, and key-lock set for both bags.All saddlebags and lids are constructed of FRP, fiberglass reinforced plastic, readyy for primer and...

V-Twin - 49-1170 - Spring Fork Bridge Top Plate Rod Support BrassDescriptionSpring Fork top plate rod support features a brass construction. Fits:FLSTS 1988-UPFXSTS 1988-UPAdditional Information

Saddlebag latch cover set features chrome face plates with black flame design inserts. Fits:FLT 1993-2013Additional Information OEM No.90690-04A

Saddlebag lock and key kit features a chrome finish. Fits:FLTR 1993-2013FLHR 1993-2013FLHTC 1993-2013FLHT 1993-2013FLHX 1993-2013Additional Information

Saddle bag lock and key kit includes 2 keys and 2 locks.All saddlebags and lids are constructed of FRP, reinforced plastic, readyy for primer and paint. FRP is made up of polyphenylene...

Saddlebag hardware kit includes all necessary tethers, hardware, seals, and hinges.*NOTE: Must order locks and face plates separately. Comprehensive saddlebag lid latch kits are great for aftermarket...

V-Twin - 49-0887 - Saddlebag Top StrapsDescriptionTop straps for saddlebag. Includes 8 screws.Includes qty 4 pieces 12-16x5/8" self tapping screws (OEM #3596) and 4 pieces 8-32x1/2" stainless truss...

V-Twin - 49-0886 - Saddlebag Lid Wear PlatesDescriptionStainless steel wear plates are for the saddlebag lid. Plates come in a set of four, and require installation with adhesive. Fits:FLT...

V-Twin - 49-0885 - Saddlebag Reinforcing Lid Back Plate SetDescriptionNew Old Stock" Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set.*NOTE: No...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent.Reflector set not included. Plate set is OE style die cast and chrome. They will accept reflector set or flame...

V-Twin - 49-0882 - Original Style Saddlebag Latch SetDescriptionSet includes four plastic rub bars installed and right and left side latches for saddlebag.Order screws and hardware separately...

Set includes four bail head studs, four washers, four grommets, four receptacles, and four mounts for the left and right side for mounting saddlebags.Does not include the lid hardware or latch plates...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set.. Fits:FLT 1993-2013Additional Information