2002

Chrome shifter rod. Fits:FXD 1991-2005Additional Information OEM No.33728-90A UOM1 - EA

Chrome straight shifter rod measures 3-5/8" long. Fits:FXD 1991-2017Additional Information UOM1 - EA Measureme

Shifter rod with a polished stainless steel finish.Length between the two holes on the rod measures 5-3/4" center to center. Fits:FXD 1991-2005Additional Information

Shifter shaft and bushing kit. Fits:FLT 2001-2016Additional Information UOM1 - KIT ManufacturerV-Twin

V-Twin - 21-0256 - Extended Shifter Lever ChromeDescriptionThis shifter lever is extended and measures 9-3/4" long for extended reach. Lever is constructed of steel and has a chrome finish.This...

V-Twin - 21-0249 - Shifter Rod with Ball Joints Ends 12 inch ChromeDescription12" shifter rod with ball joints features a chrome finish for 5 and 6 speed models. Fits:FLH 1980-UPFLT 1980-UPAdditional...

FLST black shifter bracket accepts footboard and kickstand. Fits:FLST 2000-2006Additional Information OEM No.33630-00

Forward control shifter rod kit.The shifter rod measures 11-3/4", with a maximum adjustmet of 14-1/2" center to center and minimum adjustment of 13-1/2" cetner to center. Fits:FXD 1991-2005Additional...

Chrome billet shifter lever. Fits:FXDWG 1991-2017FXST 1990-2017Additional Information OEM No.34616-02

Jocky shift assembly includes bracket to mount to the top motor mount where coil would mount and features a billet construction.Check hole spacing of two holes (1" center to center spacing). Thread...

V-Twin - 21-0123 - Shifter Lever Bracket ChromeDescriptionChrome shifter lever bracket for the left side. Fits:FXST 2000-UPAdditional Information

FLST chrome shifter bracket accepts footboard and kickstand. Fits:FLST 2000-2006Additional Information OEM No.33630-00

V-Twin - 21-0117 - Jockey Cable End BushingDescriptionJockey cable end bushing. Fits:FLSTS 2000-UPFLST 1986-UPFXST 1986-UPFXSTS 2000-UPAdditional Information

V-Twin - 21-0107 - Shifter Collar Long with WasherDescriptionLong shifter collar with washer is used to eliminate the heel shifter or for use on single shifter models. Fits:FLT 1979-UPAdditional...

V-Twin - 21-0106 - Shifter Seal CollarDescriptionShifter seal collar for use with heel/toe shifters. Fits:FLT 1979-UPAdditional Information

V-Twin - 21-0072 - Slotted Shifter LeverDescriptionSlotted shifter lever is made of forged steel and features a chrome finish.Use for front or rear shifter. Fits:FLT 1983-UPFLST 1986-UPAdditional...

V-Twin - 21-0055 - Black Heel Toe Shifter Lever SetDescriptionBlack heel toe shifter lever set. Fits:FLT 1986-UPAdditional Information

V-Twin - 21-0050 - Chrome Heel Toe Shifter Lever SetDescriptionChrome heel toe shifter lever set.*NOTE: Does not include pinch bolts, must order separately.

V-Twin - 21-0035 - Extended Heel Toe Shifter Lever Set BlackDescriptionBlack heel toe shifter lever set measures 1.0" longer than standard levers, separating the distance between the heel/toe shift...

V-Twin - 21-0002 - Extended Heel Toe Shifter Lever Set ChromeDescriptionExtended heel toe shifter lever set measures 1.0" longer than standard levers, separating the distance between the heel/toe...

V-Twin - 2054-10T - Rear Pulley Bolt and Washer Kit Allen StyleDescriptionPolished rear pulley bolt and washer kit is allen type with a 7/16-14 x 1-3/4" thread size. Fits:FLST 1997-1999 spoke...

Chrome 18 spoke rear pulley is 1-1/8" wide, 65 tooth. Pulley has 2-1/4" inner diameter, for hubs with 1" bearings. Fits:FXST 2000-2005FLST 2000-2005Additional Information

Precision made steel 29 tooth belt drive replacement transmission pulley. Fits:FXD 1991-2005FLT 1994-2006FXST 1994-2006FLST 1994-2006FXR 1994-1994Additional Information

Black 70 tooth rear drive pulley is 1-1/2" wide. Fits:FLT 2000-2003Additional Information OEM No.40217-00 UOM<

Hex flange sprocket nut features a 2-1/2" outer diameter with a black finish.*NOTE: Fits sprockets with "3" set screw holes. Installation may only allow 2 out of the 3 holes in the sprocket to be...

Transmission sprocket conversion kit is used to convert belt drive models to chain drive. Kit includes "gold seal" chain.Kit includes 23 tooth front sprocket and 51 tooth rear sprocket with special...

Transmission sprocket conversion kit is used to convert belt drive models to chain drive. Kit includes "gold seal" chain.Kit includes 23 tooth front sprocket and 51 tooth rear sprocket with special...

Transmission sprocket conversion kit is used to convert belt drive models to chain drive.Kit includes 23 tooth front sprocket and 51 tooth rear sprocket with special nut to accept sprocket and a...

York compensator sprocket kit includes 24 tooth sprocket. Fits:FLST 1986-2006FXST 1984-2006FLT 1980-2006FL 1980-1984FXD 1991-2006FXR 1984-1994FX 1980-1984Additional Information

York compensator sprocket kit includes 25 tooth sprocket. Fits:FLST 1986-2006FXST 1984-2006FLT 1980-2006FL 1980-1984FXD 1991-2006FXR 1984-1994FX 1980-1984Additional Information

Internal clutch retaining ring. Fits:FXD 1991-2003FXST 1990-1999FXR 1991-1994FLST 1990-1999FLT 1990-1999Additional Information

V-Twin - 18-0824 - Tamer Clutch Release KitDescriptionTamer clutch release kit includes the ramp, balls and gasket. Fits:FLST 1986-UPFXST 1986-UPFLT 1986-UPAdditional Information

Tamer soft pull clutch ramp assembly includes one inner ramp, one outer ramp, one cable coupling and three ball bearings. Fits:XL 1994-2022 except RHAdditional Information

Kit includes clutch release kit and clutch pushrod bearing kit. Fits:FXST 2000-2016FLST 2000-2016FXD 2000-2017FLT 2000-2016Additional Information

Tamer clutch ramp kit includes a 2 piece ramp assembly and related components.Includes the pull end! Fits:XL 1994-2020Additional Information UOM1 -

XL Tamer power clutch ramp kit is 45% easier clutch lever pull. No spacer or drilling needed for installation. Fits:XL 1994-2021Additional Information UOM

V-Twin - 18-0534 - XL Clutch Inner and Outer Clutch Release Ramp KitDescriptionClutch inner and outer release ramp kit for Sportster models. Fits:XL 1994-UPAdditional Information

V-Twin - 18-0516 - Tamer Clutch Release KitDescriptionTamer Power clutch release kit. Fits:FLST 1986-UPFXST 1986-UPFLT 1986-UPAdditional Information

Primary chain drive system is 76 link and features chain shoe adjuster assembly, clutch drum basket with starter ring gear, steel and fiber clutch plates with pressure plate assembly.Primary chain...

5th gear with 22 teeth for countershaft with high contact 5-speed models.Can also be used on 1991-93 models but will require the separate purchase of the 5th gear mainshaft high conact. ...