CVO Screamin' Eagle Softail Deuce FXSTDSE

Chrome bracket set for saddlebags. Fits: FLST 1986-2005 FXST 1984-2005 Additional Information UOM 1 - SET

Wyatt Gatling saddlebag bracket kit features a chrome finish. Kit is used to mount Touring saddlebag sets to FXST, FLST models.Brackets bolt directly to fender struts on Softails. Order saddlebag...

Kit includes set of black saddlebag adapter brackets for quick release mounting, four bail head studs, four receptacles, four cushions, four grommets, and mounting hardware for the left and right...

V-Twin - 49-0462 - Saddlebag BracketDescriptionThis bracket connects the saddlebags and attaches to the license plate bracket. Fits:FXST 1986-UPAdditional Information

V-Twin - 48-0269 - Cell Phone Handlebar MountDescriptionCell phone handlebar mount fits 7/8" to 1-1/4" diameter handlebars.Includes three shims to mount securely to handlebar. Will hold almost any...

Zinc caliper guard plate mounts to axle and keeps saddlebags out of wheels. Fits:FX 1973-1985FXST 1986-2017Additional Information UOM1 - EA

V-Twin - 47-0839 - Passenger Low Backrest PadDescriptionPassenger backrest pad features is for low and standard sissy bar uprights.Includes chrome plated mounting bracket, spacers and screws. Pad...

V-Twin - Black Solo Seat Kit fits '00-'17 FLST/FXST Models Black solo seat kit includes brackets and hardware. Lower mount bracket includes integral frame cover and 4" seat springs. Seat is covered...

Solo seat and mount kit includes 5" springs, black frame cover and leather solo seat.Baseplate is formed ribbed steel as original K type. Fits:FLST 2000-2017FXST 2000-2017Additional Information

Includes chrome hub cap, spacer sleeve, spacer, and snap ring. Fits:FXDWG 2000-2006FXSTD 2000-2006FXST 2000-2006FXSTS 2000-2006Additional Information

Chrome front wheel hub includes 3/4" bearings, races, seals, and seal spacers for single disc with 41mm forks. Fits:FXST 2000-2006 single disc - frontFXSTS 2000-2007FLST 2000-2007FLSTS 2000-2007FXDWG...

V-Twin - 45-0384 - 16 inch Wire Wheel Cover SetDescription16" wire wheel cover set is for spoked front and rear wheels with alloy hubs. Set includes 2 chrome cover with 4.1" round holes.Covers have...

Includes sealed 3/4" bearings and inner spacer tube.Alloy rear hubs has 7/16-14 pulley mount threaded hole and a 3/8-16 brake disc mount threaded hole. The distance between the mounting flanges are...

V-Twin - 44-1989 - Rear Axle Adjuster Slide Plate Stainless SteelDescriptionStainless steel rear axle side plate prevents the axle nut from scratching painted finish. Sold in pairs. Fits:FLST...

Front or rear 3/4" wheel hub bearing kit Fits:FXDWG 2000-2007 front onlyFLST 2000-2007FXST 2000-2007Additional Information UOM1 - KIT

Wheel hub bearing set has an inner diameter of 3/4".Sold as a set of 2. Fits:XL 2000-2004 RearFLST 2000-2006 FrontFXDWG 2000-2005 Front or RearFXST 2000-2006 FrontFXST 2000-2007 RearFXD 2000-2003...

FXSTD front axle only includes 2 acorn nuts. Fits:FXSTD 2000-2006Additional Information OEM No.43354-00 UOM

Front hub cap adapter spacer is for the right side, has a zinc finish, and includes a retaining ring. Fits:FXDWG 2000-2006 with 21" laced wheelFXST 2000-2006 with 21" laced wheelFXSTD 2000-2006 with...

Chrome rear axle spacer set is for both right and left sides of the axle. Fits:FXST 2000-2007Additional Information UOM2 - SET

V-Twin - 44-0739 - Swingarm Pivot Bolt ChromeDescriptionChrome swingarm flush mount pivot bolt. Fits:FLST 2000-UPFXST 2000-UPAdditional Information

Chrome rear axle adjuster and nut kit include adjusters, collars and chrome cover. You may use existing nut and cotter pin. Fits:FLST 2000-2007FXST 2000-2007Additional Information <

V-Twin - 44-0626 - Swingarm Pivot Retaining RingDescriptionSwingarm pivot retaining ring.Sold as a pack of 10. Fits:XL 2004-UPFLST 2000-UPFXST 2000-UPAdditional Information

V-Twin - 44-0623 - Swingarm Bushing SetDescriptionSwingarm bushing set. Fits:FLST 2000-UPFXST 2000-UPAdditional Information

Chrome front axle spacer for right side of the axle fits on a 2000-up FXSTD. Spacer has an overall length of 1". Fits:FXSTD 2000-2006 right side front axleAdditional Information

Chrome rear axle kit includes a 3/4" axle with a surface bearing length of 12-1/2", a 1-1/4" long chrome spacer, chrome nut kit and adjuster kit.Nut kit incudes castle nut,, washer, and cotter pin...

Chrome front 3/4" axle kit includes 2 acorn nuts and spacers. This front axle will fit 41mm forks & 2000-2006 FXSTD. Fits:FXSTD 2000-2006 41mm ForksAdditional Information

V-Twin - 44-0613 - Chrome Front Axle Kit 12-15/16 inch Overall LengthDescriptionChrome front axle kit includes chrome axle, chrome nut kit, 2 chrome spacers and washers. The axle has an outer...

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

Chrome swingarm pivot shaft. Fits:FLST 2000-2007FXST 2000-2007Additional Information OEM No.47610-00

Chrome rear axle collar. Fits:FLST 2000-2007FXST 2000-2007Additional Information OEM No.47577-00 UOM<

V-Twin - 44-0599 - Chrome Front Axle Nut and Washer KitDescriptionChrome front axle nut & washer kit. Fits:FXST 1984-UPFLST 1986-UPFL 1973-1984FX 1980-1983Additional Information

Front or rear hub bearing rebuild kit includes all internal parts including longest length inner spacer which is 4.4480" long.The inner spacer can be cut down or you can remove the collar for certain...

Kit includes chrome 10-5/8" bearing surface length axle with 3/4" outer diameter, nut kit, 2 spacers and washers. Fits:FXST 1984-2006FL 1973-1984 41mm forksFX 1980-1983 41mm forksAdditional...

V-Twin - 44-0554 - Brake Disc SpacerDescriptionzinc spacer has an outer diameter of 7/16" and an inner diameter of 5/16", with a 5/16" length.Brake disc spacers will adapt 1973-up FX, FL rear hubs to...

V-Twin - 44-0520 - Chrome Rear Axle Nut KitDescriptionChrome axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

3/4" axle spacer set with 5/16 x 24" tab threaded holes to mount fender or sissy bar and features a zinc finish.Sold as a set of 2. When mounting a rigid rear fender or sissy bar on 1986-99 Softail...

Front or rear wheel hub bearing tube spacer with 3/4" inner diameter.May be used in some cast mag wheel applications when flange is removed. For front use on FXWG and for rear use on FXST model...

V-Twin - 44-0258 - Zinc Rear Axle Nut KitDescriptionZinc axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Zinc plated .750 rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle.The axle features a 3/4" outer diameter with a...