Softail Standard FXST

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 1051 Wrist Pin Bushing Tool fits '99-'06 Twin Cam Models Features: Used to remove and install wrist pin bushings without removing connecting rods from crankcases Comes with instructi

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97,...

S&S Cycle - Stock Heads Intake Manifold O-Ring fits '84-'16 Big Twin, '86-'16 Sportster Models (OEM #26992-99, 26995-86A) Features: Sold Each Made from the highest-quality materials available

S&S Cycle - Air Temperature Sensor fits '99-'05 Big Twin Models (OEM #27270-95) Features: For single bore throttle bodies Made in the USA

S&S Cycle - Rocker Arm Shafts fits '99-'17 Twin Cam & '86-'22 Sportster Models (Except RH Sportster (OEM #17611-83)) Features: Made in the U.S.A. Fitment

S&S Cycle - Tappet Alignment Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is...

Belt Drives Ltd. - 2" Drive Belt fits '00-'06 FXST/​FLST Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure...

Belt Drives Ltd. - 3" Belt Drive fits '00-'06 FXST/​FLST Models Features: 3" electric start kits include front pulley, belt, clutch hub and clutch basket and aramid clutch set (consists of two...

Belt Drives Ltd. - 2" SS Belt Drive Without Cover fits '00-'06 FXST/​FLST Models Features: Beautiful styling and awesome performance 2" drive features a one-piece billet motor plate

Belt Drives Ltd. - 1-5/8" Belt Drive Kit fits '00-'06 FXST/​FLST & '99-'05 Dyna Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists...

Colony - 8794-10 7/8" Torx/Button-Head Brake Rotor Mounting Hardware Kit w/ Nuts fits '99-'23 FXST/​FLST/FXWG (OEM #3655) Features: Brake rotor, sprocket and belt mounting kits Available to

Custom Dynamics - Red LED Rear Strut Mount Turn Signal Smoke Lens fits Dyna, Softail & Sportster Models Upgrade your Harley-Davidson® Dyna, Sportster or Softail motorcycle with our aggressively...

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

Colony - 9810-4 Chrome Rear Axle Spacer Kit fits '87-Up FXST Model Chrome rear axle spacer kit stock include left side spacer adjuster collars and castle nut Fitment: FXST 1987-UP Rear Fitment

Colony - 9818-5 Chrome Rear Brake Disc Bolts fits '97-'17 FXD, '97-Up FLT/FXST/FLST Models (OEM #43567-92) Chrome rear brake disc bolts with a 3/8"-16 x 1" thread size and features a round button...

Colony - 9826-4 Chrome Front Axle Spacer Kit Smooth Style fits '84-Up FXST Model Chrome front axle spacer kit smooth style will fit 1984-up FXST. Kit inlcudes washers and nuts Fitment: FXST...

Colony - 9964-2 Chrome Washer Fork Tube Plug fits '84-Up FXST, '77-'86 FX, '86-Up FLST Models (OEM #5710) Chrome fork tube plug washer Fitment: FXST 1984-UP FX 1977-1984 FLST 1986-UP FX...

Colony - 9977-1 Chrome Fork Triple Tree Stem Cap fits '84-Up FXST,  '86-'94 FXR, '86-Up FLST/Sportster Models Chrome fork triple tree stem cap Fitment: FXST 1984-UP XL 1986-UP FXR...

V-Twin - CV Carburetor Fuel Mixture Screw fits '93-'06 FXR/FLT/FLST/FXST '88-'06 Sportster Models CV carburetor fuel mixture screw are extended length for easy accessability. For CV carburetors...

Colony - 2083-8 Cylinder Base Stud Set fits '99-'17 FXD, '99-Up FLT/FLST/FXST Models (OEM #16834-99) Cylinder base stud set features OEM style heat treated alloy steel studs to replace original...

Spyke - Starter Jackshaft Kit fits '99-'06 Twin Cam Models (Except '06 Dyna) - 10 Tooth Features: Complete assembly includes shaft extension, pinion gear, coupler, spring and clips Fitment

Colony - Fork Drain Screws fits '84-'99 FXST/​FLST, '84-'98 FLT/​FLHT/​FLHR/​FLTR, '84-'86 FXWG Models (OEM #45858-77) Features: Two button head Allen screws with two copper compression...

Colony - 8769-3 Front Axle Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut,...

Drag Specialties - Rear Master Cylinder Repair Kit fits '99-'17 Big Twin (Except '15-'17 Softails, '08-'17 Dressers, H-D FL Trike) & 'L87-'03 Sportster Models (OEM #42382-87) Features: Rebuild...

Colony - Fork Stem Nut Cap for '80-'11 Wide Glide (OEM #45670-80) Features: Made in the U.S.A. Fitment

Colony - Exhaust Stud and Nut fits '99-'23 Big Twin, '86-'22 Sportster Models (Except RH Sportster (OEM #16715-83)) Features: Kit includes four studs and four flanged nuts Made in the U.S.A

Colony - Transmission Mainshaft Nut fits '92-'99 Evolution Big Twin Models (OEM #35211-91A/B) Features: 1-1/2" left-hand threads Made in the U.S.A.

Colony - Head Bolt Set fits '99-'17 Twin Cam & '92-'22 Sportster Models (Except RH Sportster (OEM #16478-85A, 16480-92)) Features: 12-point replacement headbolts Made in the U.S.A.

Colony - Front/Brake Rotor Bolts with Nuts Kit for '00-'23 FXST (OEM #3655A, 7739) Features: Size is 5/16"-18 x 7/8" Torx head design Fitment:

Colony - 9807-10 7/8" Torx/Button-Head Brake Rotor Mounting Hardware Kit w/ Nuts fits '99-'23 Softail/​Dyna Glide Models (OEM #43567-92) Features: Brake rotor, sprocket and belt mounting kits

Colony - Polished Primary Cover Bolt Kit fits '00-'17 Softail, '99-'05 Dyna Models (OEM #4740A, 4820A) Features: Made in the U.S.A. Replacement Part for OEM:

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock...

Colony - 8793-5 7/8" Torx/Button-Head Brake Rotor Mounting Hardware Kit w/o Nuts fits '99-'20 Big Twin & '92-'22 Sportster Models (Except RH Sportster (OEM #3655)) Features: Brake rotor, sprocket...

Colony - Acorn Front Belt Drive Pulley Nut fits '99-'06 Twin Cam Models Features: Chrome front pulley nut for open primary belt drive applications Made in the U.S.A. <

Colony - 35mm Fork Slider Bottom Cap Studs with Nut fits '86-'07 Showa forks (OEM #45998-73) Features: Package of two Made in the U.S.A.

Drag Specialties - Clutch/Brake Pivot Pins fits  '99-'17 H-D Big Twin, '96-'03 Sportster Models (Except '15-'17 Softail, '08-'17 Dressers (OEM #45032-82)) Features: Chromed socket-head pivot pins...