Softail Deuce FXSTD

Drag Specialties - 70-7/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin/ '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...

Drag Specialties - Front/Rear Caliper Rebuild Kit for 4-piston fits '00-'07 Big Twin & '00-'03 Sportster Models (Repl. OEM #s 44313-00/ 44313-01) Features: High-quality replacement components Fitment 2007 Harley-Davidson Low Rider...

Barnett - Scorpion Series Clear Derby Cover fits '99-'06 Twin Cam Models Barnett's Scorpion Series Clear Derby Covers feature a scratch- and discoloration-resistant window which is tightly secured and sealed with an O-ring gasket. There's also an outer...

Trask - Black Powdercoat Standard V-Line Handlebar The Trask 1¼" V-Line Handlebars have a 1" grip area, are drilled for internal wiring and notched for throttle-by-wire (TBW). This standard bar has a 1" clamping area and features DOM mild steel...

K&N - Satin Black Aircharger® Intake System W/ Cast Aluminum Intake Tubes fits '01-'17 Twin Cam EFI Models - Cable Throttle² This system features built-in breathers that replace external OE breathers. ² Exempt per CARB Executive...

Galfer - 11.5" Wave® Full-Floating Center Hub Front Brake Rotor W/ Black/Machined Carrier fits '00-'14 Big Twin, '00-'13 Sportster Models Features Made from 420 high-carbon stainless Tier-1 steel Laser cut, never stamped Each rotor is...

Performance Machine - Super Gas Air Cleaners Available in your choice of a black or chrome finish. Features Air cleaners include a K&N filter behind a stainless steel wire mesh screen to allow high-volume air flow, resulting in increased...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 9-1/2" Rise with 1-1/2" Pullback Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers,...

Performance Machine - Chrome Four-Piston Differential-Bore Front Caliper for 11.5" Rotors The Four-Piston Differential-Bore Front Caliper is created with Performance Machine's trademark differential bore technology, making for a caliper that is big...

Drag Specialties - Solid-State Regulators Features: High-reliability 12V voltage regulators feature rugged aluminum alloy construction Provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become...

LA Choppers Kage Fighter Pullback Handlebars Chrome Experience the perfect blend of durability and style with LA Choppers Kage Fighter Pullback Handlebars in Chrome. These American-made handlebars are constructed from steel tubing and designed to...

LA Choppers Kage Fighter Handlebars Flat Black Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch...

LA Choppers Kage Fighter Handlebars Gloss Black Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch...

You can expect comfort as always with The Saddlemen Profiler Seat. Narrow styling, a thin profile and low riding height Driver's portion features SaddleGel™ pad for unsurpassed levels of comfort Supple SaddleHyde™ offers a combination of...

Drag Specialties - Rear Master Cylinder Repair Kit fits '99-'17 Big Twin (Except '15-'17 Softails, '08-'17 Dressers, H-D FL Trike) & 'L87-'03 Sportster Models (OEM #42382-87) Features: Rebuild kits fit a variety of H-D models listed Meet or...

Trask - External Breather Kit fits All Twin Cam Wngines Equipped w/ Assault Charge Air Cleaners Features: Vents breathers to atmosphere instead of recirculating oil mist back through the intake Converts the Assault Charge Air Cleaner from internal...

Vance & Hines - Big Shots Staggered Exhaust System fits '00-'09 Softail FXS/​FXST/​FLST Models (Except '08-'11 FXCW/C, '09 FXSTSSE) - Chrome Not legal for sale or use in California on any pollution controlled motor...

V-Twin - Black Cam Cover fits '01-'17 Twin Cam Models OEM #25369-01A Please note this cam cover comes without a sensor hole. Fitment FXST 2001-2017FLST 2001-2017FXD 2001-2017FLT 2001-2016

Drag Specialties - 80" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) W/ 26" Clutch Adjuster - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings,...

Drag Specialties - 30-3/4" Black Vinyl Idle Cable (Repl. OEM #270000-04/ 56342-01/ 56342-90/ 56342-96/ 56408-01) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Joker Machine - Points Cover fits '99-'17 Twin Cam Models - Anodized Black This cover is available in your choice of a finned or smooth finish. Features Include mounting screws Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat...

Arlen Ness - 10-Gauge Points Cover fits '99-'17 Twin Cam Models These covers are machined from 6061-T6 billet aluminum and are available in seven different colors: Chrome, Black Anodized, Blue Anodized, Gold Anodized, Orange Anodized, Red Anodized and...

Drag Specialties - Crankcase Breather Kit fits '93-'17 Big Twin Models (Exc. '17 FXDLS, '16-'17 Softails & '08-'17 Dressers) Features Comes with breather bolts, washers and hardware Works with most aftermarket air cleaners One-piece chrome tube...

LC Fabrications - Harley Davidson Electronic Speedometer Sensor Delete Fits '95 & Up Evo, Twin Cam and Sportster Models For an easy installation process, this speedometer eliminates the need for wire cutting when you replace your stock speedometer...

LA Choppers - Original Clevis Billet County Footpegs These LA Choppers County footpegs are available in a variety of finishes, including raw, black, chrome, and bronze, allowing you to choose the one that best suits your style. They are specifically...

Drag Specialties - Cut Down Chrome Front Brake Master Cylinder - 9/16" Bore The Drag Specialties Cut Down Front Brake Master Cylinder is constructed from chrome die-cast aluminum, its unique design features a cut down of .256 inches, which creates...

Drag Specialties - Cut Down Chrome Front Brake Master Cylinder - 5/8" Bore The Drag Specialties Cut Down Front Brake Master Cylinder is made from chrome die-cast aluminum and has been cut down by .256 inches, which gives it a lower profile that...

Arlen Ness - Speedliner Cable Grips fits 1" Handlebars Arlen Ness' Speedliner grips have a cool and comfortable oversized 3D knurled rubber design with dual integrated channels for more grip than ever. They deliver outstanding hand traction and comfort...

Galfer - 11.5" Wave® Front Full-Floating W/ Black Carrier & Red Buttons Brake Rotor fits '00-'14 Big Twin, '00-'13 XL Models Galfer's high-quality and patented Rotor is full-floating style to guarantee optimum brake pad-to-rotor. It is built...

Cycle Pro LLC - EZ Quick™ Tuner Kit fits '99-'06 Twin Cam Models 88" The EZ Quick™ Tuner Kit from Cycle Pro LLC is built from top-notch quality brass components and guaranteed to improve overall engine performance. Features Direct fit...

Joker Machine - 41mm Black Fork Mount Turn Signals W/ Amber Lens fits '82-'06 Dyna & Softail Models Joker Machine's Fork Mount Turn Signals can be mounted either inward or outward of the fork tubes and feature a pitch bolt mounting design for a...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 5-1/2" Rise with 1-1/2" Pullback Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers,...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 4" Rise Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 3" Rise Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Jagg - Vertical Front Mount 10-Row Wideline Oil Cooler System This 10-row, high-performing two-pass oil cooler is built to fit all bike with vertical frame tubes. It is specifically designed to exceed the cooling demands of today's V-Twin...

Accutronix - 10" Bandit Riser Kit W/O Gauge Mount Adapter (1-1/8" Clamping Area) Available in your choice of a black or chrome finish.  The clamping area on these risers is 1-1/8" | You will need handlebars with a 1-1/8" clamping area to run these...

Galfer - 13" Oversize Cubiq® Full-Floating Front/Rear Brake Rotor fits '00-'14 Big Twin, '00-'13 Sportster Models Galfer's latest brake rotor style, the Cubiq® model, resembles the intricate hexagonal structure of steel molecules. The Cubiq®...

Galfer - 12.5" Oversize Cubiq® Full-Floating Front/Rear Brake Rotor fits '00-'14 Big Twin, '00-'13 Sportster Models Galfer's latest brake rotor style, the Cubiq® model, resembles the intricate hexagonal structure of steel molecules. The...

Arlen Ness - 10-Gauge Pushrod Tube Kits for '99-'17 Twin Cam Engines The Arlen Ness 10-Gauge Pushrod Tube Kits are built from 6061-T6 billet aluminum and are sold in a set of four. Available in your choice of a black anodized or titanium anodized...

Biltwell - Punisher Footpeg Classic - Polished These footpegs are elegantly styled and made with brutally strong billet aluminum. Features Constructed from CNC-machined 6061-T6 billet aluminum and designed to complement the technology and aesthetic...