Motion Pro

Motion Pro - 08-0060 - Replacement Pin - Chain Riveting Tool - 3 mmFeaturesReplacement pin for use with Motion Pro's chain riveting toolSpecsTypeChain Riveting ToolProduct NamePinRiding...

Motion Pro - 08-0058 - Tool - Chain Breaker/Chain RivetingFeaturesVersatile enough to be used on drive chains and some cam chainsIncludes three pin sizes to fit most chains (2 mm, 3 mm, 4...

Motion Pro - 08-0062 - Replacement Tip for Chain Rivet ToolFeaturesReplacement rivet tip, chain tool for use with Motion Pro's chain breaker and riveting tool part# 08-0058 and chain tool part#...

Motion Pro - 08-0061 - Replacement Pin - Chain Riveting Tool - 4 mmFeaturesReplacement pin for use with Motion Pro's chain riveting toolSpecsRiding StyleAdventure Touring / Dual-SportRiding...

Motion Pro - 08-0059 - Replacement Pin - Chain Riveting Tool - 2 mmFeaturesReplacement pin for use with Motion Pro's chain riveting toolSpecsFeaturesSize 2 mmRiding StyleAdventure Touring /...

Motion Pro - 08-0006 - Tire Levers - 11-1/2" - PairFeaturesOne end is flat and the other end is curvedHeat treated for strength and durabilityProvides excellent leverageCold forged steelSpecsRiding...

Motion Pro - 08-0008 - Holding Tool - ClutchFeaturesHolds clutch hubs, flywheels, gears, sprockets, etc.Recommended for square tooth-style clutch hubsFeatures 8 mm spanner pinsJaws open up to 5"...

Motion Pro - 08-0007 - Tire Lever - Curved - 15" - BlackFeaturesDouble-compound curved tire ironCold forged steelSpecsStyleCurvedLength Metric38.1 cmMaterialForged SteelColor/FinishBlackRiding...

Motion Pro - 08-0032 - Auxiliary Fuel Tank Features For use when tuning a machine with the gas tank removed Includes 4' of 1/4" fuel line and a 1/4" in-line fuel barb Tank can also be used for...

Motion Pro - 08-0002 - Pin - Replacement/Chain BreakerFeaturesHeat treated for strength and wear resistanceReplacement for Motion Pro folding chain tool part# 08-0001.Replacement for Motion Pro light...

Motion Pro - 08-0001 - Chain Breaker with Folding HandleFeaturesDurable drive pin is heat treated for strength and wear resistanceWill push link pin completely through link/side plateMax pin...

Motion Pro - 12-0033 - Premium Fuel Line - Gray - 5/16" - 25'FeaturesFlexible in temperatures from -35  F to +165  FResistant to swelling, direct sunlight, hardening and/or crackingFuel line...

Motion Pro - 12-0032 - Premium Fuel Line - Gray - 1/4" - 25'FeaturesFlexible in temperatures from -35  F to +165  FResistant to swelling, direct sunlight, hardening and/or crackingFuel line stretches...

Motion Pro - 12-0031 - Premium Fuel Line - Gray - 3/16" - 25'FeaturesFlexible in temperatures from -35  F to +165  FResistant to swelling, direct sunlight, hardening and/or crackingFuel line...

Motion Pro - 08-0135 - Jumbo Chain ToolFeaturesDesigned to break roller chain up to 630 (fits all standard and O-ring chain sizes 520 to 630) and to rivet chain up to 530 (not 630)Master link side...

Motion Pro - 08-0092 - Degree Wheel - Engine Timing - Ignition/CamFeaturesManufactured from 0.052" thick aluminum with a 6 mm center holeCheck or set ignition and/or cam...

Motion Pro - 08-0143 - Bleeder - Brake Line - HydraulicFeaturesUnique check valve lets fluid and air escape while preventing air from re-entering the systemUniversal tool makes bleeding brakes a...

Motion Pro - 08-0122 - Ignition System Tester Features Will test the ignition systems of most motorcycles, watercraft, ATVs and snowmobiles The larger the gap the spark will jump, the stronger...

Motion Pro - 08-0183 - Valve Core Tool - For Schrader Valve - Installation/RemovalFeaturesAllows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader...

Motion Pro - 08-0189 - Deluxe Auxiliary Fuel Tank Features Upgraded petcock for easier opening and closing Built-in fuel return line and breather on cap for use on fuel-injected...

Motion Pro - 08-0230 - Pliers - MasterlinkFeaturesOne tip is shorter and notched to be placed on the pin, which allows the longer end to push the clipDesigned to simplify installation and removal of...

Motion Pro - 08-0186 - Pliers - Snap RingFeaturesEconomical pliers easily work with both inside and outside opening snap rings or clipsIncludes three extra sets of tips: one additional straight tip...

Motion Pro - 08-0182 - Cable LuberFeaturesClamps over housing and wire allowing an aerosol can to be connectedOnce lube runs out the far end, the cable is lubricatedUsed to inject lubricant into...

Motion Pro - 08-0067 - Press Plates - Replacement - SetFeaturesReplacement press plates for Motion Pro® chain breaker and riveting tool part# 08-0058SpecsRiding StyleAdventure Touring /...

Motion Pro - 08-0137 - Spring Compressor - Clutch/Removal - XL/Big Twin/BuellFeaturesStrong die cast steel frame with hardened and black oxide coated adapter boltsReplacing the clutch on...

Motion Pro - 08-0144 - Fork Spring Tool - Springer/Front Fork - Harley DavidsonFeaturesAssists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcyclesMade in the...

Motion Pro - 08-0153 - Side Case Puller - Harley-Davidson/BuellFeaturesIncludes bracket, puller bolt and set screwsUsed to remove the right side-case coverMade in the USADesigned to work with '70 to...

Motion Pro - 08-0574 - Clip On Alignment ToolFeaturesCollapsible compact design can be stored in almost any toolboxIdeal for aftermarket clip on handlebar installationAdjustable arm allows exact...

Motion Pro - 08-0435 - Wall Bracket for T-Handle RackFeaturesFor mounting Motion Pro's T-handle rack to the side of a toolbox, wall, post or any other flat surfaceFeatures a quick release pin for...

Motion Pro - 08-0427 - Gear JammerFeaturesOriginally developed for removing and installing the primary gear on a Honda CRF450R/XLocks gears in place for easy installation and removalAllows tightening...

Motion Pro - 08-0267 - Bearing Removal Tool - Wheel - 25 mmFeaturesHeat treated for durability and long service lifeSpecsColor/FinishBlackDrive Size Metric25 mmRiding StyleStreetTypeWheelProduct...

Motion Pro - 08-0269 - Wheel Bearing Remover - Split Collet - Metric - 10/12/15/17/20/25 mm - SetFeaturesEight-piece metric set includes large driver rod, small driver rod, and removers for 10 mm, 12...

Motion Pro - 08-0350 - Belt Tension GaugeFeaturesDesigned to work with all belt drive models with a 10 lb specificationGraduated scale for easy referenceNew L shaped pad fits all belt sizesCompact...

Motion Pro - 08-0220 - Wrench - Rocker Box Cover - 3/16"FeaturesDesigned to reach hard-to-get-at 3/16" hex screw on the rocker boxes of Big Twin, Sportster and Buell modelsVinyl cover offers comfort...

Motion Pro - 15-0003 - Grip Glue - 0.71 oz. net wt.FeaturesMSDS Migration DataEasy to apply and easy to remove from throttle tube and bars when changing gripsHigh cured temperature resistance is...

Motion Pro - 08-0339 - Screw - Tappet Tool - Oil FilterFeaturesO-ring design retains the tool in wrench or socket while flange design allows downward force to be applied to toolDesigned for use with...

Motion Pro - 15-0002 - Cable Lube - 6 oz. net wt. - AerosolFeaturesMSDS Migration DataSpecial blend of Red Line® synthetic lubricants and rust inhibitors keeps your cables working smoothly in any...

Motion Pro - 08-0380 - Adapter - Torque Wrench - AdjustableFeaturesWill work with most 6 mm-19 mm metric and most 1/4"-3/4" fractional SAE combination wrenchesTorque any fastener with a combination...

Motion Pro - 08-0556 - T-Handle Spinner Hex ToolFeaturesBearing-mounted spinner provides faster and easier removal and installation of bolts and nuts1/4" hex drive head accepts most common driver...

Motion Pro - 08-0145 - T-Handle Socket Tool - 4-PieceFeaturesHex socket extends only part of the way into the socket to allow the nut to be held flush with the end for easier, hands-free startingDeep...