Softail Rocker C FXCWC

Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2-13 mounting bolts (bolts not included) Fits...

The H2 Bars look good on everything!  Features 1-inch O.D. x 0.120 wall seamless 4130 chromoly tubing with precision mitered and TIG welded joints. Threaded bungs on vertical uprights are CNC-machined chromoly steel with1/2-13 t.p.i. holes to...

Arlen Ness - Titanium 12-Point Primary Cover Bolt Kit fits '07-'16 Twin Cam Touring Models Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all needed bolts for the engine's outer...

Arlen Ness - 12-Point Titanium Cam Cover/Point Cover Bolt Kit Features: 12-point bolts feature a spot drilled bolt head & lightning hole design on the bolt flange M8 kits include all needed bolts for both the engine's cam cover & point...

Arlen Ness - 12-Point Transmission Side Cover/Trap Door Bolt Kit - Titanium Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all needed bolts for the transmission side cover and trap...

Arlen Ness - 12-Point Titanium Derby Cover Bolt Kit Features: CNC machined from solid titanium Fitment 2025 Harley-Davidson Road Glide Custom FLTRX - - 2025 Harley-Davidson Road Glide 3...

Arlen Ness - Titanium 12-Point Lifter Block Bolt Kit Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all 8 needed bolts required for front and rear lifter blocks Reduced weight...

Arlen Ness - Gold Anodized Clear Tear Series Air Cleaner Kit fits '01-'17 Twin Cam EFI Models & '99-'06 CV Carb - Cable Throttle (Used) The breather design of this air kit is o-ringed at the heads and passes through the backing plated and exits...

1FNGR - Signature Series Adjustable Easier Pull Clutch + Brake Lever Combo fits Dyna/Softail Models Features: Full range of quick adjustability smooth 2 finger lever design for improved comfort Easier pull over OEM by (30%) average Built in mirror...

ODI - Ruffian Lock-On Harley Grips - Cable Throttle Features: Moto inspired grip designed for performance V-Twin models Legendary Ruffian full-knurl diamond pattern Thin profile delivers amazing control, feedback and traction Proprietary...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '99-'07 Touring (Except '99-'01 Touring Fuel Injection w/ Lower Fairings), '00-'15 Softail (Except '11-'15 CVO), '99-'17 Dyna Models (Except '16-'17 FXDLS) Features: Clean...

Pro-One - Strut LED Marker Light fits '00-'17 Softail Models Features: CNC machined from solid billet aluminum, carefully polished, then triple-chrome plated Include both smoked and amber lenses Some models may require a load equalizer to function...

James Gasket - Main Drive Gear Seal fits '07-'17 Twin Cam, '06 Dyna Models (OEM #12074) Features: Top quality main drive gear shaft seals Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail...

James Gasket - Breather Gasket fits '11-'17 Twin Cam Models (OEM #17025-03) Features: High-quality genuine James Gaskets Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail...

James Gasket - Rocker Housing Gasket fits '99-'17 Twin Cam Models (OEM #16719-99A, 16719-99B) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the...

James Gasket - Rocker Cover Gasket fits '99-'17 Twin Cam Models (OEM #17386-99A) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and...

James Gasket - Primary Cover Gasket fits '06-'16 FLT, '07-'17 Softail/Dyna Models (OEM #34934-06) Features: Top quality gasket Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 987 Cruise Drive/6-Speed Main Bearing Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely installs new main transmission case bearing; does not remove bearing Holds bearing square to its bore, eliminating any marring...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Shifter Shaft Removal Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission Made in the...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...

Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission Features: A real time saver for removing and installing the shifter mechanism sleeve in cruise drive Big Twin...

Jims - 900 6-Speed Main Drive Gear and Bearing Remover/Installer fits '06-'17 Touring, '06 Dyna & '07-'17 Softail Models Features: Complete kit for servicing the main drive gear or the main bearing on the latest Harley-Davidson­­®...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing screw Flywheels will be pushed from the left case Bolts to primary...

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...

Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be...