Touring Street Glide Special FLHXS

Le Pera - Black Stitched Maverick Daddy Long Legs Seat with Backrest fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) (15” W Front, 6” W Rear) Features: Molded one-piece foam foundation covered with premium-grade black vinyl on a...

Le Pera - Black Maverick Daddy Long Legs Seat w/ HR Carbon Fiber Inlay fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) (15” W Front, 6” W Rear) Features: Molded one-piece foam foundation covered with premium-grade black vinyl on...

Le Pera - Black Stitched Maverick Daddy Long Legs Seat fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) (15” W Front, 6” W Rear) Features: Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge...

Le Pera - Black Double Diamond Monterey Sport Solo Seat fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: Double diamond stitch adds the perfect custom Le Pera touch Made in the U.S.A...

Le Pera - Black Double Diamond Monterey Sport Pillion Pad fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: The Monterey Sport solo has a deeply contoured 15" wide driver area with an aggressively tapered mid section Can be ridden...

Le Pera - Black Stitched Maverick Seat with Backrest fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: Comfortable seat that retains a custom look Special contours give good support while allowing unrestricted movement Molded...

Le Pera - Black Diamond Streaker Solo Seat fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: Hand-crafted and powder-coated 16-gauge steel base plate Stripped down, simple, and clean Top-grade black vinyl cover Made in the...

Le Pera - Black Diamond Sprocket Solo Seat fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: Bobbing the back of one of our most popular designs of the 1970's has created one wicked solo seat This sinfully bobbed and chopped design...

Le Pera - Black Smooth Aviator Up Front Solo Seat fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: Design fills the gap between the Monterey solo touring seat and the Bare Bones thin, low seat Moves you 2" closer to the handlebars...

Le Pera - Black Diamond Super Villain Seat fits '08-'24 Touring Models (Except '23 FLHXSE/​FLTRXSE) Features: Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate Made in the U.S.A...

James Gasket - Main Drive Gear Seal fits '07-'17 Twin Cam, '06 Dyna Models (OEM #12074) Features: Top quality main drive gear shaft seals Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail...

James Gasket - Transmission to Engine Seal fits '07-'16 FLHT, '06-'17 Dyna Models (OEM #35607-06) Features: Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Low Rider S FXDLS - - 2015-2016 Harley-Davidson Electra Glide...

James Gasket - Breather Gasket fits '11-'17 Twin Cam Models (OEM #17025-03) Features: High-quality genuine James Gaskets Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail...

James Gasket - Rocker Housing Gasket fits '99-'17 Twin Cam Models (OEM #16719-99A, 16719-99B) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the...

James Gasket - Rocker Cover Gasket fits '99-'17 Twin Cam Models (OEM #17386-99A) Features: Strategically placed elastomer beading helps ensure a positive seal while our clear silicone conformal coating fills in minor imperfections in the flanges and...

James Gasket - Primary Cover Gasket fits '06-'16 FLT, '07-'17 Softail/Dyna Models (OEM #34934-06) Features: Top quality gasket Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...

Jims - 944 Ignition Switch Alignment Tool fits '14-'21 Touring Models Features: Also used to position switch in the correct orientation for properly activating the fork lock Proper alignment of the switch will extend the life of the ignition switch...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Shifter Shaft Removal Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission Made in the...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission Features: A real time saver for removing and installing the shifter mechanism sleeve in cruise drive Big Twin...

Jims - 5518 Shifter Shaft Bushing Tool fits '85-'16 FLT Touring w/ 5- or 6-Speed Transmission Features: Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove he inner primary Tools installs new bushings to...

Jims - 5534 Compensator Bolt Driver Torx Socket fits '14-'21 Big Twin Models Features: Correct-style driver/socket for the compensating sprocket retaining fastener Made in the USA For use with Jim's part# 10500031 compensator bolt...

Jims - 900 6-Speed Main Drive Gear and Bearing Remover/Installer fits '06-'17 Touring, '06 Dyna & '07-'17 Softail Models Features: Complete kit for servicing the main drive gear or the main bearing on the latest Harley-Davidson­­®...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing screw Flywheels will be pushed from the left case Bolts to primary...

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...

Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be...