Bagger Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Out of stock
Feuling - 574 Race Series® Chain Drive Conversion Camchest Kits for '99-'06 Twin Cam (Except '06 Dyna Glide)
Feuling
$2,049.95Feuling - 574 Race Series® Chain Drive Conversion Camchest Kits for '99-'06 Twin Cam (Except '06 Dyna Glide) NOTE: Conversion camshafts for '99-'06 Twin Cam engines use the '99-'06 inner cam journals with the '07-'16 outer cam journals permitting...$2,049.95 -
Out of stock
Galfer Wave Front 11.8" Center Hub Break Rotors fits '08-'13 Touring, '15-'17 Softail, '06-'17 Dyna Glide & '14-'20 Sportsters
Galfer
$346.95Galfer Wave Fron/11.8" Center Hub Break Rotors fits '08-'13 Touring, '15-'17 Softail, '06-'17 Dyna Glide & '14-'20 Sportsters The all-new Galfer Wave Break Rotors are complete with gold-anodized rotor carriers. NOTE: For ultimate braking performance...$346.95 -
Out of stock
S&S - 585CEZ Easy Start Chain-Drive Camchest Kit - fits '07-'17 Twin Cam, '06 Dyna
S&S Cycle
MSRP: $2,529.95$2,025.95S&S - 585CEZ Easy Start Chain-Drive Camchest Kit for Harley Twin Cam and Dynas The 585CEZ Easy Start Chain-Drive Camchest Kit by S&S will improve engine performance and upgrade your motorcycle. Features: Upgrade to S&S bolt-in...MSRP: $2,529.95$2,025.95 -
Out of stock
Wild 1 - Chubby Flatline 12" Handlebars - Chrome
Wild 1 Handlebars
$314.95Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE$314.95 -
Out of stock
Wild 1 - Physco Street Fighter 14" Handlebars - Chrome
Wild 1 Handlebars
$342.95Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...$342.95 -
Out of stock
Wild 1 - Physco Street Fighter 10" Handlebars - Chrome
Wild 1 Handlebars
$342.95Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...$342.95 -
Out of stock
EMD - Ribbed Cam Cover - fits '17-Up M8
EMD
$310.95 - $330.95EMD - Ribbed Cam Cover - fits '17-Up M8 These Ribbed EMD covers are the real alternative to the cold, rigid and old fashioned “Billet” style. Features: Manufactured in die cast aluminum, CNC milled gasket surface OEM...$310.95 - $330.95 -
Out of stockOn Sale
Arlen Ness - 12-Point Transmission Side Cover/Trap Door Bolt Kit - Titanium
Arlen Ness
MSRP: $99.95Now: $89.96Was: $99.95Arlen Ness - 12-Point Transmission Side Cover/Trap Door Bolt Kit - Titanium Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all needed bolts for the transmission side cover and trap...MSRP: $99.95Now: $89.96Was: $99.95 -
Out of stockOn Sale
Arlen Ness - 12-Point Titanium Transmission Side Cover/Trap Door Bolt Kit
Arlen Ness
MSRP: $139.95Now: $125.96Was: $139.95Arlen Ness - 12-Point Titanium Transmission Side Cover/Trap Door Bolt Kit Features: 12-point bolts feature a spot drilled bolt head and lightning hole design on the bolt flange Kit includes all needed bolts for the transmission side cover and trap...MSRP: $139.95Now: $125.96Was: $139.95 -
Out of stock
Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A)
Jims
$260.95Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...$260.95 -
Out of stock
Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models
Jims
$126.40Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...$126.40 -
Out of stock
Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models
Jims
MSRP: $161.95$161.75Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...MSRP: $161.95$161.75 -
Out of stock
Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models
Jims
$239.15Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...$239.15 -
Out of stock
Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models
Jims
$563.80Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...$563.80 -
Out of stock
Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models
Jims
$384.70Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...$384.70 -
Out of stock
Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool
Jims
$341.65Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...$341.65 -
Out of stock
Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models
Jims
$319.50Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...$319.50 -
Out of stock
Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission
Jims
MSRP: $128.95$128.60Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission Features: A real time saver for removing and installing the shifter mechanism sleeve in cruise drive Big Twin...MSRP: $128.95$128.60 -
Out of stock
Jims - 5816 Cruise Drive Countershaft 1st Scissor Gear Alignment Tool fits '17-'20 M-Eight Models
Jims
MSRP: $68.95$57.35Jims - Cruise Drive Countershaft 1st Scissor Gear Alignment Tool fits '17-'20 M-Eight Models Features: Essential for installing countershaft 1st scissor gear in cruise drive transmissions Ensures scissor gear teeth mesh correctly with the mainshaft...MSRP: $68.95$57.35 -
Out of stock
Jims - 900 6-Speed Main Drive Gear and Bearing Remover/Installer fits '06-'17 Touring, '06 Dyna & '07-'17 Softail Models
Jims
$511.80Jims - 900 6-Speed Main Drive Gear and Bearing Remover/Installer fits '06-'17 Touring, '06 Dyna & '07-'17 Softail Models Features: Complete kit for servicing the main drive gear or the main bearing on the latest Harley-Davidson®...$511.80 -
Out of stock
Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models
Jims
$276.10Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...$276.10 -
Out of stock
Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models
Jims
$418.20Jims - 995 Case Splitter Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: "Breaks" the case sealant by pushing apart both case halves Uses included hand thread-in pushing screw Flywheels will be pushed from the left case Bolts to primary...$418.20 -
Out of stock
Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R)
Jims
$124.35Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...$124.35 -
Out of stock
Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/FLST & '85-'06 Touring & Dyna Models
Jims
$264.45Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...$264.45 -
Out of stock
Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models
Jims
$163.05Jims - 972 6-Speed Main Drive Gear Seal Installer fits all '07-'20 Big Twin & '06 Dyna Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be...$163.05 -
Out of stock
Jims - 975 Engine Rotator Tool fits '07-'17 Twin Cam & '06 Dyna Glide Models
Jims
$172.95Jims - 975 Engine Rotator Tool fits '07-'17 Twin Cam & '06 Dyna Glide Models Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...$172.95 -
Out of stock
Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide)
Jims
$173.55Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...$173.55 -
Out of stock
Jims - 956 Replacement Sleeve Timken Case Bearing Tool
Jims
MSRP: $255.95$245.25Jims - 956 Replacement Sleeve Timken Case Bearing Tool Features: Sleeve is several times stronger than stock aluminum case material that standard bearings ride in Replacement sleeve kit for Timken® Case Bearing Tool Made in the...MSRP: $255.95$245.25 -
Out of stock
Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/FLHT/FXR, '84-'99 Big Twins & '84-'00 FLHT/FXR/FXD Models
Jims
MSRP: $54.95$54.60Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/FLHT/FXR, '84-'99 Big Twins & '84-'00 FLHT/FXR/FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...MSRP: $54.95$54.60 -
Out of stock
Jims - 1147 Alternator Rotor Puller fits '97-'06 Big Twin Models
Jims
MSRP: $175.95$175.85Jims - 1147 Alternator Rotor Puller fits '97-'06 Big Twin Models Features: A must-have tool for 45A charging systems; will also work on any Harley-Davidson® alternator system that has threaded puller holes Tool protects threads on sprocket shaft...MSRP: $175.95$175.85 -
Out of stock
Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides)
Jims
$943.95Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...$943.95 -
Out of stock
Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models
Jims
$44.95Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 1989 Harley-Davidson Electra Glide Ultra...$44.95 -
Out of stock
Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R)
Jims
MSRP: $183.95$148.05Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...MSRP: $183.95$148.05 -
Out of stock
Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna)
Jims
$184.95Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...$184.95 -
Out of stock
Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models
Jims
$107.95Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...$107.95 -
Out of stock
Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models
Jims
$126.95Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...$126.95 -
Out of stock
Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models
Jims
$53.20Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly Made in the U.S.A...$53.20 -
Out of stock
Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models
Jims
$367.95Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...$367.95 -
Out of stock
Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models
Jims
MSRP: $171.95$171.90Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...MSRP: $171.95$171.90 -
Out of stock
Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models
Jims
MSRP: $97.95$97.65Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...MSRP: $97.95$97.65
Harley Bagger Parts
Upgrade your ride with top-quality Harley Bagger parts built for style, performance, and long-haul reliability. Whether you're customizing a Road Glide, Street Glide, Road King, Electra Glide, or any other Touring model, our collection of Performance Bagger parts is ready to help you fine-tune every detail.
From suspension and exhaust upgrades to lighting, foot controls, and touring essentials — we stock the gear serious riders trust to push farther and ride harder. Whether you're building a show-stopping custom or dialing in comfort for long-distance rides, these Harley Bagger parts deliver the fit and function your bike deserves.
Don’t settle for stock. Explore our full lineup of performance Harley Bagger parts and take your Touring build to the next level.