V-Twin - Mid Control Shifter Shaft fits '89-Up FXST/FLST, '81-Up Sportster Models Softail mid control shifter shaft is the cross over type, used to route over inner primary to connect to shifter linkage. For mid shifter control. Shaft has splined...

Jims - 16-2320 M8 Primary Locking Tool fits '18-Up FLST/FXST Models Jims primary locking tool is used to lock the primary for service work on M8 models. Fitment: FLST 2018-UP FXST 2018-UP

V-Twin - Black Die Cast Tank Trim Cover fits '84-'99 FXST Model Black die cast tank trim cover replaces existing rubber divider on models with die cast dash. Includes cushion tape for underside to protect gas tanks. Fitment: FXST 1984-1999 Tech...

V-Twin - Brake Pedal Shaft fits '86-'17 FXST/FLST Models Softail foot brake pedal shaft with splined end. For mid control brake and pedal kit. Pedal shaft is splined to accept footpeg mount. Drilled and tapped for 3/8" x 16 thread Fitment: FXST...

V-Twin - Passenger Footpeg Set fits '18-Up FLST/FXST Models Passenger footpeg set with a female clevis features an alloy finish. The length from the center of the clevis bolt to the end is 100mm. Sold asset of two. Fitment: FLST 2018-UP FXST...

Colony - 9953-10 Acorn Screw Kit fits '99-Up FXST/FLST/FLT & '99-'17 FXD Models Acron screw kit for TC-88 points cover. Fitment: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-2017

V-Twin - Intake Manifold Seal Kit fits '90-'17 FLST/FXST, '88-'06 Sportster Models Manifold seal kit is to reseal late model manifolds with CV carburetor Fitment: FLST 1990-2017 FXD 1991-2017 FXST 1990-2017 XL 1988-2006 FLT 1990-UP

GMA - Rear 2 Piston Caliper and 11-1/2" Disc Kit fits '84-'86 FXWG/FXST Models Kit includes a GMA 2-piston caliper with bracket and a 11.5" polished stainless disc with mount bolts. Note: UPS may consider this part as packaged "oversize" for...

V-Twin - AEE Foot Shifter Kit fits '79-'84 FX/FL, '86-'99 FXST/FLST Models AEE foot shifter kit for 1 up 3 down shifting. Includes threaded rod with 5/16"x24 threads on each end. Shorty control set, pedal requires less reach than originals! Fitment:...

V-Twin - Brake Shifter Mid Control Kit fits '18-Up FXFBS/FXFB/FLSB/FXDRS Models (OEM #505020-40R 505020-41L) Mid control kit includes brake and shifter kit. Kit places the shifter and brake foot controls from a forward to mid control location on the...

V-Twin - Chrome Grate Brake Small Pedal Pad fits '84-'17 FXST, '18-Up FXBRS/FXBR/FLSB Models Grate style brake pedal pad is the small type featuring a chrome plated finish. Surface has raised knubs for better grip and self-cleaning Fitment: FXBRS...

V-Twin - M8 3.6 Raw Steel Gallon Gas Tank fits '18-Up FLST/FLT/FXST Models Gas tank is one piece and has a fuel capicity of 14 liters, featuring a raw finish for M8 models. Includes an alloy screw in type type vented gas cap. Check the tank for...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Black Outer Headlamp Trim Rim fits '18-Up FLHCS/FLSL/FLHC/FLDE/FLSB Models (OEM #614005-73) Black stock type outer headlamp trim rim is used on headlamps with a 7" diameter. Clips are included. Mounts the same as stock ring for easy...

V-Twin - M8 Frisco Front Fender fits '18-'24 FLST/FXST Model Frisco front fender is for M8 fat body models featuring a raw finish. Short and quick bolt on installation, requires seat change. Fitment: FLST 2018-2024 FXST 2018-2024

V-Twin - 107" Big Bore Twin Cam Cylinder Kit fits '99-'06 FLST/FXST/FLT/FXD Model 107" Twin Cam big bore cylinder kit includes 10.5:1 piston kit and steel cylinders with black finish. Requires case machining and fits a 4" stroke flywheel...

V-Twin - Electronic Speedometer Assembly fits '96-'03 FXST/FLHR/FLST/FXDWG Model (OEM #74461-03A) Electronic speedometer with tachometer. Certain years and models will require separate purchase of correct wiring harness and tachometer adapter. Gauge...

V-Twin - Exhaust Support fits '95-'99 FXST Model (OEM #65459-95) - Chrome Chrome exhaust support mounts stock or custom drag pipes to frame. Fitment: FXST 1995-1999

V-Twin - 7" Round Air Cleaner Assembly fits '18-Up FLST/FXST, '17-Up FLT Models - Chrome 7" M8 round air cleaner assembly features a chrome finish. Fitment: FLST 2018-UP FLT 2017-UP FXST 2018-UP

V-Twin - 8" Round Air Cleaner Assembly fits '18-Up FLST/FXST, '17-Up FLT Models - Chrome 8" M8 round air cleaner assembly features a chrome finish. Fitment: FLST 2018-UP FLT 2017-UP FXST 2018-UP

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits '14-'17 Softail Models Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits M8 Softail Models Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Kodlin - Fastback Risers - fits '18-'23 M8 Softail With Digital Gauge Features: CNC-machined from billet aluminum Stainless hardware and zip ties included Fitment 2022-2024 Harley-Davidson Softail Low Rider ST...

Drag Specialties - Starter Drive Clutch fits '06 Dyna, '07-'17 Twin Cam Models (OEM #31632-06, 31633-07) Features: High-quality components to repair common failures of OEM Harley starters Designed to improve clutch life under hard starting...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '07-'17 FLST/C/F/N (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '07-'17 Softails (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed...

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits '86-'99 FLST/C/F/N (OEM #43005-86) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.15” fits '84-'96 FXST, '93-'96 FXDWG, '84-'86 FXWG (Single Disc (OEM #43671-84)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '99 FXD/​FXDWG, '97-'99 XL (OEM #40975-86, 40975-86A) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '00-'05 FXST, '00-'06 FLST, '00-'05 FXD/​FXDWG, '00-'04 Sportster (OEM #40700-03, 40975-00) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '12-'17 Softail (w/ ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and end...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '99 FXDWG (Single Disc (OEM #43671-84A)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '00-'06 FLST/C/F/N (OEM #43005-00) Features: Valve Stem: SMV (Side Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '12-'17 FLST/C/F/N (w/ ABS) Features: Valve Stem: SMV (Side Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '00-'06 FXST/B/C, '00-'05 FXDWG (OEM #43671-00, 43700-00) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors,...

Colony - Inner Primary Mount Kit fits '94-'99 FXST/​FLST Models (OEM #2818, 33318-85, 4086) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '86-'93 FXST/​FLST Models (OEM #2818, 2871W, 33318-35) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Inner Primary Mount Kit fits '80-'85 Big Twin 4-Speed Models (OEM #16830-54, 4021, 4722) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A...

Colony - Fork Drain Screws fits '84-'99 FXST/​FLST, '84-'98 FLT/​FLHT/​FLHR/​FLTR, '84-'86 FXWG Models (OEM #45858-77) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - 8769-3 Front Axle Nut/Washer Kit fits '99-'07 FXDWG, '00-'06 FXST/​FLST, '99-'07 FLHT/​FLHR/​FLTR; 1/2”-20 Thread (OEM #6590HW, 7068, 7845) Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4"...