Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...

Jims - 1700 Main/Shaft Clutch Gear Tool fits '36-'86 Big Twin Models w/ Kick-Start 4-Speed Transmission Features: Removes kick starter clutch gear successfully, without damage to the gear Made in the U.S.A...

Jims - 96780-32A Piston Pin Keeper Tool fits '36-'72 Big Twin Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention possible Use to install retaining...

Jims - 95660-42 Main Seal Tool fits '41-'79 4-Speed Transmissions Features: Used to remove and install the main drive seal on specific Harley-Davidson® Big Twin models Made in the U.S.A. Fitment 1979 Harley-Davidson 1200 Fat Bob...

Jims - 33096-54B Kickstarter Shaft fits '36-'86 Big Twin Models Features: Precision-machined replacement shaft Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special FLHX - - 1983-1985 Harley-Davidson Low Rider...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end...

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Jims - 96384-39 Shift Fork Gauge fits '39-'78 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A. Fitment 1978 Harley-Davidson Electra Glide...

S&S Cycle - Standard Cover Billet Oil Pump fits '36-'69 Big Twin Models Features: Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

S&S Cycle - Natural Generator Gear Cover fits '40-'E48 Panhead Style Features: Fit most generator motors; styled after the OEM types below Cast construction with a natural finish Include gasket and mounting hardware Made in the U.S.A. Eight...

45 tooth splined rear sprocket is nickel plated for XL and WR rear hubs. WR-KR-XR sprockets have a .350" offset from the center of the spline to the center of the tooth profile. This is 8 tooth spline and 9.9mm at the widest point on spline...

49 tooth splined engine rear sprocket is nickel plated. WR-KR-XR sprockets have a .350" offset from the center of the spline to the center of the tooth profile. This is 8 tooth spline and 9.9mm at the widest point on spline. V-Twin's KR-XL-WR...

750 XR hub lock nut set features a zinc finish and a thread size of 2.031. Fitment: XL 1957-1972 WR 1941-1952

51 tooth splined engine rear sprocket is nickel plated. WR-KR-XR sprockets have a .350" offset from the center of the spline to the center of the tooth profile. This is 8 tooth spline and 9.9mm at the widest point on spline. V-Twin's KR-XL-WR...

Gary Bang - Tappet Base Gasket Set fits '41-'84 FL, '71-'84 FX Models Sifton solid pushrod set is constructed of aluminum alloy with heat treated steel ends and is a set of 4 pushrods for 74" Panhead overhead valve.3 of the 4 rods in this set measure...

Made of stamped steel, this half moon footboard insert set have a ribbed design for a deco look. Fitment: FL 1940-1965 WL 1940-1952 UL 1940-1947 G 1940-1973

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - BDLPCP-0041 Replacement Clutch Plate Kit for Pro Clutch fits '36-'84 Big Twin Models Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

XR wheel bearing kit is for use with front wheel hubs. Kit accepts 3/8" axle. Axle not included. Note: Kit is designed for 45 WLmodels spring forks with rockers that are mounted on the inside of the forks Fitment: WR 1947-1952 Tech...

XR spool wheel internal kit is dual steel flanged and includes the steel tube, 2 sealed ball bearings and accepts a 3/8" axle. Does not include hub. For use with the wheel bearing on WR front spool hubs. Kit accepts 3/8" axle. Axle not included...

Motorshop - Gas Tank Fuel Rod Alignment Tool fits '40-'65 FL, '40-'52 WL Models (OEM #96365-42) Gas tank fuel rod alignment tool corrects alignment of bottom and top holes. Fitment: FL 1940-1965 WL 1940-1952 Instructions: Click here to view...

3 speed and reverse chrome left side tank hand shifter gate, has a 32N1R front to rear shift pattern. The distance center to center of the screw holes is 3.5". Note: Use 1/4"-28 x 1/2" hex head bolts for gate installation Fitment: G...

Zinc plated shift gate hex screws is 1/4"-28 x 1/2", National Coarse. Sold in a pack of 5. Fitment: G 1947-1973 FL 1947-1965

Chrome left side tank hand shifter gate has a 432N1 front to rear shift pattern. The mounting holes measure 3-1/2" center to center. *NOTE: Use 1/4"-28 x 1/2" hex head bolts for gate installation. Fitment: UL 1937-1941 FL 1947-1966 EL...

Wyatt Gatling - Fuel Petcock Shut-Off Rod Kit fits '41-'49 FL Model Kit features complete shut off rod and cadmium plated seat fitting with a left tank reserve. The top cap finish is chrome and the seat finish is cadmium. Includes spring and...

Wyatt Gatling - Black Replica Muffler fits '37-'40 UL/EL Model (OEM #65201-37) Replica black finish muffler has a built in offset "Y" pipe saddle and original batique style tail to fit 2" muffler set.The body has a 2.50" diameter, the inlet has a 1.73"...

Spring Fork Inline top triple tree with ears features cast steel construction with white zinc finish.Exact replica of the Original VL design. Accepts dog bone or flanders risers with 1" outer diameter ears. Inner diameter of holes for mounting on...

J-Slot air cleaner backing plate is for four bolt Linkert type carburetor. Backing plate is zinc plated. Fitment: FL 1941-1965 WL 1941-1952 UL 1941-1948 Tech Note: Suggested to use with #49-1804, 7" Script Air Cleaner Raw

74 Spring Fork rocker kit features a black finish. Kit includes stud and bushing kit for Spring Fork.Set has raised are where grease fittings are located. Set has exact shape and look for 1940-1948 Big Twins and 1940-1957 Servi-Car. Fitment: FL...

12 volt 5 AH fully sealed lead acid rechargeable battery with a F1 terminal is for V-Twin steel box conversion. Note: Must order conversion box to house this battery. Use styrofoam to adjust spacing as required Not for electric...

Inner primary drain tube with. Fitment: UL 1937-1948 EL 1936-1940 FL 1941-1947

Wyatt Gatling - Raw Inner Primary Drain Fitting fits '37-'48 UL, '41-'64 FL, '36-'52 EL Models (OEM #3803-36C) Inner primary drain fitting features a raw finish. Fitting must be brazed or welded in place. Order tube separately. Fitment: UL...

Colony - 2071-10 Chrome Inner Primary and Oil Tank Mount Kit fits '37-'48 UL, '36-'40 EL, '41-'64 FL Models Chrome mount kit includes 2 hex screws, springs, cotter pins and washer. Attaches the inner primary to the oil tank and chain guard on top, and...

V-Twin - Footboard Tabs fits '41-'84 FL, '36-'40 EL/UL Models Forged steel footboard tabs for 1" frame tubes. Fitment: EL 1936-1940 FL 1941-1984 UL 1936-1940

Namz - Chrome Distributor Clamp Features: For models with aftermarket/electronic distributor Polished stainless steel construction Simple to install Made in the U.S.A. Kit Includes: 1 chrome allen head bolt for OEM distributor 1 polished...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 2664-5 +.005" Oversized Linkert/Bendix Carburetor Throttle Lever Wire Block Kit fits '36-'65 Big Twin Models (OEM #27450-36) Features: Kit includes cadmium-plated block, screw, cotter pin and brass washers Made in the...