Dual cam brake kit includes the back plate, lugs and wrench, cable handle and an axle assembly in a chrome finish. Fits:G 1941-1957EL 1936-1948FL 1941-1948Additional Information UOM1 - KIT FinishChrome LocationFront ManufacturerV-Twin OriginImported...

Spring Fork front brake kit features black and parkerized finish components. Includes finned brake drum, an early brake stay bar, and 1938-40 style backing plate. Fits:EL 1938-1948UL 1938-1948Additional Information UOM1 - KIT FinishParkerized ...

Mechanical rear brake kit includes all components in a parkerized finish, except the brake pedal and backing plate.*NOTE: Must order pedal and mount plate separately. On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:FL...

Chrome tank hand shifter kit for ratchet top transmission features smooth gate, handle, rod, pivot bolt, and hardware for 3.5 gallon tanks.The smooth gate allows you to use a ratchet, rotary, or 5-speed transmission. The smooth gate is straight through...

Chrome tank hand shifter kit for ratchet top transmission features smooth gate, handle, rod, pivot bolt, and hardware for 3.5 gallon tanks.The smooth gate allows you to use a ratchet, rotary, or 5-speed transmission. The smooth gate is straight through...

Includes bracket with bushings installed, pedal, spring cover, rod and all friction components.The clutch pull rod connects to the arm on the pivot shaft. This provides an offset to use with an aluminum inner primary cover. Order pull rod end and bolt...

Daniel Boone forward control set features a chrome finish. Set includes right and left sides. For use with rigid frame models with mechanical cross shaft to operate brakes and a 4 speed ratchet top transmission.Requires cross shaft and mechanical brakes,...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and master cylinder seperately. ...

Police style jockey shift kit clamps to all Big Twin 1-1/8" front down tubes and is for 4-speed transmission with handshift top. Kit includes a gate with detents. The handle is offset for 5 gallon bobbed tanks. Fits:FX 1971-1979FL 1941-1979Additional...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamoed brake shoes with fitted linings. Fits:VL 1937-1948EL...

Parkerized brake control kit for use with mechanical brake frames with a cross shaft tube only. Footboards may be used with this kit.On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. ...

Chrome brake control kit for mechanical brake frames with a cross shaft tube only. Footboards may be used with this kit.Must order the clutch cable separately. NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. ...

Rigid forward brake pedal kit components are chrome and features the FXST style position.Includes pedal, plate, short rod, footpeg, and cross shaft arm. ...

Parkerized brake control kit for use with mechanical brake frames with a cross shaft tube only. Includes a parkerized stop lamp switch.*NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:UL 1936-1948EL 1936-1940FL...

Lee style jockey pedal assembly features a chrome plate and pedal, black OE frame bracket and parkerized mount bolt kit.The bracket is for mounting to the frame. *NOTE: Must order clutch pull rod separately. Fits:FX 1971-1984FL 1941-1984EL 1936-1952U...

Replica kick starter kit features one piece black forged arm and spring. Kit is assembled.Ratchet kicker gear is 16 tooth. Includes parkerized nuts, washer, and spring stud. Kick starter arm is painted black, arm shows forging marks as original. Has MFG...

Rocker clutch assembly components are parkerized as original and features the type 2 hole design, as correct for 1936 only.Order correct clutch pull rod separately. Bracket is original with bushing installed. The bracket mounts the pedal assembly lower...

Parkerized rocker clutch assembly is fully assembled.Includes hex mount bolts, clutch rod end and bolts, and an oval rubber pad set packed inside of a 5 gallon oil can. ...

Mechanical brake kit features a parkerized finish. Kit does not include pedal, pedal plate and rear rod.*NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:UL 1936-1948EL 1936-1940FL 1941-1957Additional Information UOM1 -...

Front brake kit features a pressed steel brake drum, backing plate with early case adjuster, and thin brake stay bar which is exact for 1936-37 UL & EL. Restoration quality throughout!Components are produced on V-Twin MFG proprietary tool. Fits:EL...

Partial 4-speed kick starter kit includes all components except the arm, cover and pedal.Includes the clutch lever finger shaft assembly. Order clutch lever shaft and finger kit to complete assembly, available separately. *NOTE: When installing any type...

V-Twin kick starter kit incldes a reinforced polished kick starter cover, chrome arm and all gears and hardware to make conversion complete.Includes a chrome offset arm to fit 1941-1984 FLH models with chrome spring. *NOTE: When installing any type of...

V-Twin kick starter kit incldes a reinforced chrome plated kick starter cover, chrome arm and all gears and hardware to make conversion complete.Includes a chrome offset arm to fit 1954-1984 FL models, with chrome springs. *NOTE: When installing any type...

V-Twin - 22-0171 - 1936-1937 Style Mechanical Brake Kit Description 1936-1937 style mechanical brake kit for rigid frames features a nickel plated pedal and the remaining parts are parkerized.*NOTE: On 1936-1957 Big Twins, the rear brake lever arm...

Brake pedal assembly includes pedal, spring, and mount strap for 45 models in a chrome finish. Fits:G 1936-1973W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages808

Kit features a black finish and includes a plate, springs, replica shoes, cam and pivot stud.Includes #23-1750 cast replica brake shoes with riveted linings. Some sanding may be required for exact fit. Order arm separately. **NOTE: On 1936-1957 Big...

Kit features a chrome finish and includes a plate, springs, replica shoes, cam and pivot stud.Includes #23-1750 cast replica brake shoes with riveted linings installed. Some sanding may be required for exact fit. Order arm separately. **NOTE: On...

Servi-car shift lever kit features a chrome gate and hand lever with a zinc plated rod.. Fits:G 1947-1973 for Servi-Car modelsAdditional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages807 Replacement Items21-0475 -...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.*NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.*NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

V-Twin - 21-1936 - Small Shifter Lever Ball Description Black small shifter knob with a brass insert 3/8" - 24 internal threads. Fits: EL 1936-1940 G 1937-1973 FL 1941-1951 WL 1929-1953 UL 1938-1948 Additional Information OEM No...

AEE shifter pedal plate is zinc plated steel. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #22-0637 AEE Foot Shifter Assembly.

Foot shifter lever features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA FinishStainless ManufacturerV-Twin MaterialSteel OriginImported Tech NoteSuggested to use with #22-0637 AEE Foot Shifter Assembly.

Daniel Boone jockey pedal kit features a chrome finish and is for left side mounting on 1941-1984 FL models. Kit features three bolt mounting that will accept kickstand assemblies. Fits:FL 1941-1984Additional Information UOM1 - KIT ManufacturerV-Twin ...

Kit includes chrome cast 4-speed gate for the 1936-1946 tanks with the cateye dash, and the arm to bolt to the shifter arm on the transmission. Original atlas design from the 1940's.Kit allows forward gear up shifting for 1936-1946 models. No need to...

Shifter rod kit features a zicad plated finish. With hook end to accept cotter pin.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL 1941-1957U 1937-1948EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

Exact replica shifter gate is for a 4-speed transmission and is cast of polished solid brass with a milled slot.Accurate casting will fit 1936-1946 gas tanks which were originally fitted with a stamped steel gate. This is an original Atlas design from...

Shifter knob has 3/8 x 24 thread and is shaped like an Evolution engine. Fits:FL 1941-1965G 1941-1973W 1941-1952Additional Information UOM1 - EA MeasurementsAdditional InformationHeight: 2-3/4"Width: 1-3/8"Length: 2-5/8" ...

Chrome plated steel tubular style hand shifter lever includes cup, original style black ball, spring and cotter pin. Ball is threaded 3/8" x 24.Tubular shift lever is exact replica for 1936 EL models. Does not use a bronze bushing or nut. Bronze bushing...