Magnetic drain plug prevents metal particles from circulating through engine, and oil tanks. Plug is 3/8" - 24 UNF. Fits:FX 1971-1984FL 1941-1984Additional Information OEM No.700 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages428

Magnetic drain plug prevents metal particles from circulating through the transmission. Plug is 1/2" - 13 UNC. Fits:FX 1971-1984FL 1941-1984Additional Information OEM No.707 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages428

Magnetic drain plug prevents metal particles from circulating. Plug is 1/2" - 20 UNF. Fits:FXST 1984-1986FL 1965-1984FX 1971-1984FXR 1984-1986Additional Information OEM No.60348-65B UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages428

Raw steel motor mount repair bushing kit has a 3/8" inner diameter and a 1/2" outer diameter. This kit is used to align motor after frame mount repair.Drill a 1/2" hole in motor mount. The 3/8" bushing hole is offset to the one side. The spacers will...

Horn insulator washers Fits:WL 1931-1952VL 1931-1936G 1936-1957FL 1936-1941Additional Information OEM No.69032-31 UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages1172

Stainless steel lower fork leg drain plugs. Fits:FL 1949-1976Additional Information UOM5 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages598 Replacement Items37-8777 - Zinc Drain Plug

Front axle cap cover set includes right and left caps with set screws for glide type forks and anchor stud cap.THis is a three piece set. Fits:FL 1949-1971 front axleAdditional Information OEM No.43895-56 UOM1 - SET MeasurementsAdditional InformationI...

Front axle cap cover set includes right and left caps with a set of screws for glide type forks.Does not include anchor stud cap. Fits:FL 1949-1971Additional Information UOM2 - SET MeasurementsAdditional InformationAxle Cap O.D.: 1.522"Axle...

Primary cover screw set features a zinc finish. Fits:FL 1965-1975Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages755

Zinc spacer for switch mount kit. Fits:XLCH 1958-1969Additional Information UOM5 - PK FinishZinc ManufacturerV-Twin OriginImported 2025 Catalog Pages1046 Tech NoteSuggested to use with #32-9028 switch mount kit

Horn mount kit includes components to mount horn on all 1946-1948 models. Fits:UL 1946-1948FL 1946-1948WL 1946-1948G 1946-1948Additional Information OEM No.69108-42 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages1171

Transmission drive speedometer cable features cadmium plating and has an outer diameter of 10mm and a length of 35". Cable has a flexible metal housing and a hex nut fitting. Includes 5/8" top nut. Fits:FX 1971-1972FL 1962-1980FX 1980-1983Additional...

Zinc transmission drive speedometer cable with male nut. This cable has an outer diameter of 10mm and has a zinc plated flexible metal housing and hex nut fitting. This cable has a length of 54-1/2".Speedometer end is a female fitting and the rear end...

Control brake cable cotton housing.Order inner spring brake cable separately. Fits:UL 1938-1947FL 1936-1948WL 1936-1952EL 1936-1948VL 1930-1936G 1936-1956Additional Information OEM No.4143-30C UOM1 - EA MeasurementsAdditional InformationLength:...

Outer throttle and spark control cotton braided housing accepts inner wire features a cloth casing.Measures 52" long with a 3/4" end. Fits:UL 1937-1948WL 1932-1948EL 1936-1940VL 1934-1936FL 1941-1948Additional Information UOM1 - EA ...

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has a length of 46". Fits:XL 1957-1970Additional Information OEM No.67051-52A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages724

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 6.5mm and is 35" long. Cable is constructed of zinc plated flexible metal casing. Fits:FLHS 1962-1980FX 1972-1972FLH 1962-1980FX 1980-1983Additional...

Cable kit is for one side with pull throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing. Kit is pull type.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides. Order grip set separately. Fits:FX...

Conversion speedometer cable is 50" long, female-female ends thick type with 5/8" top nut. For use on late male fitting on speedometers.Speedometer end is a female fitting and the rear wheel drive end is a female nut. Fits:WL 1937-1952Additional...

Zinc transmission drive speedometer cable with male top nut. Cable has male fitting at the speedometer end and a hex nut for the speedometer drive end.Speedometer end is a male fitting and the tansmission drive end is a female nut. Fits:WL...

Black transmission drive speedometer coarse thread cable with 16mm top nut. This cable has a length of 46". Fits:K 1952-1956XL 1957-1970Additional Information OEM No.67051-52A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages724

Replica inner spring brake cable, 1928-1957 Fits:UL 1938-1947G 1936-1957FL 1936-1948WL 1936-1952EL 1936-1948VL 1930-1936Additional Information OEM No.45153-28 UOM1 - EA MeasurementsAdditional InformationLength: 62-1/4"Diameter: 1/16" ...

Replica brake cable measures 60" with inner and outer housing. This cable can be cut to desired length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional Information UOM1 - EA MeasurementsAdditional InformationThickness: ...

Zicad transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 10mm and a length of 35". Cable has a zi-cad plated flexible metal housing and a hex nut fitting.Speedometer end is a female fitting and the transmission...

Cable kit is for one side with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides. Fits:XL 1957-1971FX 1971-1972FL 1954-1973K...

Replica zicad transmission drive speedometer cable is 35-1/2" with a male fitting at the speedometer end and a hex nut" for the speedometer drive end.Speedometer end is a male fitting and the transmission drive end is a female nut. ...

Chrome plated transmission drive speedometer cable with 5/8" top nut. This cable has a length of 35" and has a chrome plated flexible metal housing with a hex nut fitting, for the transmission drive unit. Fits:FX 1971-1972FL 1962-1980FX...

Front Brake cable is a replacement core and casing. This cab le cable is 60" long and can be cut to proper length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional Information OEM No.45060-54 UOM1 - EA MeasurementsAdditional...

Electric starter clutch cable with eyelet end for starter kit and clutch release arm. Includes a 5/16 x 24" adjuster. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-2039 V-Fire 1...

V-Twin - 36-1678 - 1941-1964 FL Black Clutch CableDescription1941-1964 FL black clutch cable for ultima 1.4KW starter kit .*NOTE: Cables reqiures clutch hand lever assembly with 3/8" hole for cable end. Fits:FL 1941-1964Additional Information UOM1 - EA ...

Cable kit is for two sides with push throttle. Kit includes all internal parts and features chrome throttle spirals. Grips are not included.Kit inlcudes this OE diameter cable housings. Fits:UL 1937-1948FL 1936-1948WL 1936-1948EL 1936-1948Additional...

Black transmission drive speedometer cable with 16mm top nut . This cable has a length of 45.25". Fits:KH 1954-1956XLH 1957-1972Additional Information OEM No.67051-70 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages986

Pull throttle assembly includes twist grip collar, cable and inner plunger for one side on 1949-1953 models.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides. Fits:FL 1949-1953Hummer 1949-1953Additional Information UOM1 - KIT ...

Black tachometer cable for mechanical tachometer features a 16mm top nut.For use on 1965-1969 Sportster models with a magneto ignition. ...

Outer throttle and spark control cable set is 52" long and features a vinyl casing.Outer casing can be cut to desired length. Cable set includes two outer cables with spools installed and two solid inner wires. Fits:FL 1949-1953Additional Information ...

Solid oiled music wires as original for push-pull original 1909-1973 throttle applications.Our inner control cable is manufactured to meet OEM specifications for long lasting durabilty and performance. ...

Outer throttle and spark control cable set includes, 2 outer vinyl covered cable housings.Spools are installed. ...

Replica outer throttle and spark control cable features cotton braided outer cloth casing for use with inner wire.Order inner control cable set separately. Fits:FL 1949-1953Additional Information OEM No.36528-49 UOM1 - EA MeasurementsAdditional...

Throttle Cable Wire End Fits:UL 1937-1948J 1915-1926EL 1936-1940VL 1934-1936WL 1929-1948FL 1941-1948Additional Information OEM No.56420-09 UOM10 - PK MeasurementsAdditional InformationDiameter: 5/8" ManufacturerV-Twin OriginImported 2025...

Solid oiled music wires as original for push-pull original 1909-1973 throttle applications.Our inner control cable is manufactured to meet OEM specifications for long lasting durability and performance. ...