Black backing lock plate for rear mechanical brake. Fits:FL 1941-1957 rearG 1941-1957 frontEL 1936-1952 rearEL 1936-1948 frontFL 1941-1948 frontAdditional Information OEM No.44475-35 UOM1 - EA LocationRear ManufacturerV-Twin OriginImported 2025...

Zinc locating block for the rear mechanical brake. Fits:K 1952-1956XL 1957-1972Additional Information OEM No.41730-52 UOM1 - EA LocationRear ManufacturerV-Twin OriginUSA 2025 Catalog Pages897

Parkerized Hummer 23" brake rod. Fits: Hummer 1955-1959 125cc Hummer 1948-1952 125cc Hummer 1953-1959 165cc Super 10 1960-1961 165cc Pacer 1962-1962 165/175cc Ranger 1962-1962 165cc Hummer 1962-1962 165/175cc Additional Information OEM No. 42256-47...

Zicad rear mechanical brake rod is 22-1/2" long and includes a nut.Sportster rear brake rod length is 16.25" and is for swingarm models. This length is measured from the center of the axle plate to the center of the swingarm pivot bolt. ...

Rear rigid mechanical brake drum kit fits frames with cross shaft.Kit includes a cast rear brake drum for greater heat dissipation, but the backing plate and shoe assembly will accept original type pressed drums. Fits:FL 1941-1957EL 1936-1952Additional...

Mechanical rear brake drum for star hub wheel features cast iron construction with a chrome finish, and provides better cooling and braking.Full cast iron construction provides excellent heat dissipation, and no distortion during heavy braking. Sprocket...

Mechanical rear brake drum is for star hub wheel with a black finish and features better cooling and braking with the cast iron consturction.This brake drum features full cast iron construction for excellent heat dissipation, and no distortion during...

Spring fork front brake backing plate pivot stud with lock plate. Fits:UL 1937-1948EL 1937-1948G 1941-1957FL 1941-1948Additional Information OEM No.44449-36 UOM1 - EA LocationFront ManufacturerV-Twin OriginImported 2025 Catalog Pages792

A 3 piece set includes the locating block, pivot stud, and chrome nut.For use with a drum type mechanical brake. Order spacers separately. Fits:K 1952-1956XL 1957-1972Additional Information OEM No.41876-54 UOM1 - KIT LocationFront ManufacturerV-Twin ...

Chrome brake plunger assembly to replace stock components. Fits:FL 1958-1969Additional Information OEM No.41770-58 UOM1 - EA MeasurementsAdditional InformationFull Length: 4-9/16" ManufacturerV-Twin OriginImported 2025 Catalog Pages578

Chrome non polished Wagner style rear drum master cylinder is assembled with internals and includes cap and boot. Has rough surface with chrome plated finish.Master cylinder is 3/4" bore. Master cylinder is cast iron difference internal. ...

Finned front brake drum features a chrome finish. Fits:G 1958-1966FL 1949-1966Additional Information UOM1 - EA FinishChrome LocationFront ManufacturerV-Twin OriginImported 2025 Catalog Pages598

Finned front brake drum features a black finish. Fits:FL 1949-1966G 1958-1971Additional Information UOM1 - EA FinishBlack LocationFront ManufacturerV-Twin OriginImported 2025 Catalog Pages595

Mechanical brake cam kit includes cam, pivot stud, collars, springs and nuts. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - KIT LocationRear ManufacturerV-Twin OriginImported 2025 Catalog Pages576

Brake pedal and plate kit has parkerized finish and includes emergency brake kit. Restoration quality! Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - KIT FinishParkerized ManufacturerV-Twin OriginImported 2025 Catalog Pages575 ...

Black rigid mechanical brake drum with sprocket kit includes parkerized lug bolt set with factory style "T" wrench.Black drum has correct sprocket and dust ring riveted in place. Dow pins installed. *NOTE: Drum is deep-drawn from steel plate (not cast)...

Chrome rear brake pedal without slot. Fits:FL 1958-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages578

Black pivot stud is for rear mechanical brake backing plate.The threaded end to the collar measures 7/8" and the cotter pin hole end to the collar measures 1-9/16". Fits:UL 1937-1948EL 1936-1940FL 1941-1957Additional Information OEM No.41875-38 UOM1 -...

Parkerized cluch cable bracket bolts to engine to route cable away from cylinder heat, and align cable with clutch arm. Fits:KH 1952-1970 earlyK 1952-1970 earlyXLCH 1952-1970 earlyXL 1952-1970 earlyXLH 1952-1970 earlyAdditional Information OEM No...

Cadmium plated clutch cable bracket bolts to engine to route cable away from cyclinder heat, and align cable with clutch arm. Fits:KH 1952-1970 earlyK 1952-1970 earlyXLCH 1952-1970 earlyXL 1952-1970 earlyXLH 1952-1970 earlyAdditional Information OEM No...

Rocker clutch pedal assembly is a complete unit including the pedal, bracket, friction kit, cover, and spring.Order correct clutch pull rod separately. Clutch pull rod connects to the pin riveted to the inside of the pedal. Assembly is for exact...

Rocker clutch kit includes a parkerized rocker clutch assembly, mount bolts and a pedal pad set.Exact for restoration of years listed. ...

Black Spring Fork front brake kit includes a cable clamp, shackle, adjuster, cable, backing plate, brake shoes, springs, drum, lugs, arm, cam, pivot stud and grease seal. Fits:UL 1936-1948EL 1936-1940FL 1941-1948Additional Information UOM1 - KIT ...

Chrome Spring Fork front brake kit includes a cable clamp, shackle, adjuster, cable, backing plate, brake shoes, springs, drum, lugs, arm, cam, pivot stud and grease seal. Fits:UL 1936-1948EL 1936-1940FL 1941-1948Additional Information UOM1 - KIT ...

Shifter lever control kit for the left side is 3 speed type with a 32N1 front to rear shift pattern. Fits:WL 1947-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages807 Replacement Items49-0074 - 3 Speed Hand...

Shifter handle assembly for the left side is a 3 speed and reverse type with a 32N1R front to rear shift pattern. Fits:G 1947-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages240 Replacement Items21-0205 -...

Kick starter conversion kit includes a polished sprocket cover, kick starter arm, pedal, gear stop, ratchet plate and gear hole plug and hardware necessary for installation.Check ratchet gear spacing before assembly. Fits:XLCH 1952-1970Additional...

Chrome heavy duty kick starter kit features smooth thick wall kick cover and heavy duty kick starter arm. Kit is partially assembled.Requires the use of a wafer type release bearing kit. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional...

Includes mount bracket with bushings installed, pedal, spring, cover and all friction components.The clutch pull rod connects to the arm on the pivot shaft. *NOTE: The rod must be ordered separately. *NOTE: Can also be used on 1952-1984 Big Twin models...

Replica chrome shifter control kit includes heavy duty shifter bracket, shifter lever, rod, rubber shift peg, footpeg, inner lever, instructions and diagram.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual...

Kick starter conversion kit includes a cast sprocket cover, kick starter arm, pedal, gear stop, ratchet plate, gear hole plug and hardware necessary for installation.Check ratchet gear spacing before assembly. ...

Spring Fork backing plate, brake drum, anchor arm and cable kit fits 1936-1948 Big Twins. Dual cam and finned brake drum, backing plate and anchor arm have a black finish, other parts are parkerized. Fits:UL 1936-1948EL 1936-1940FL 1941-1948Additional...

Daniel Boone mechanical brake control kit features a chrome finish.For models with cross shaft operated brakes. Features 2 bolt holes for mounting. Rod not included, order shifter side separately. Developed in the early 1980's by Daniel Boone. Fits:FL...

Rear mechanical brake assembly includes all components necessary for the complete installation, for stock and aftermarker rigid frames with brake cross shaft tube.Rear drum assembly, axle kit, pedal and linkage kit parts supplied in black and parkerized...

Replica 4-speed kick starter kit comes partially assembled with the kick starter gear and kick starter shaft assembled into the polished aluminum cover.Ratchet kick starter gear is 16 tooth. Includes parkerized nuts, washer, and spring stud. Has MFG...

1957-1974 XL rear bracke control kit includes black, polished, and zinc plated components.Must order brake rod separately. Fits:XL 1957-1974Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages895 Replacement...

Daniel Boone shifter kit for the left side on ratchet top 4 speed models. Fits:FL 1941-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Daniel Boone Forward control kit features a chrome finish. Includes right side brake and left side shifter assembly.For mechanical brakes in rigid frame with cross shaft, for stock and custom rigid hardtail frames. Fits:FL 1941-1957Additional Information...

Rear brake kit includes chrome plated components.Must order brake rod separately. Fits:XL 1957-1972Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages895 Replacement Items23-0408 - Brake Pedal Chrome23-1997 - Brake...

Includes mount bracket with bushings installed, pedal, spring, black friction cover and all friction components.*NOTE: Must order the rod separately. *NOTE: Can also be used on 1952-1984 Big Twin models when converting to handshift. 1971-1984 models will...