Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - BDLPCP-0041 Replacement Clutch Plate Kit for Pro Clutch fits '36-'84 Big Twin Models Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

XR wheel bearing kit is for use with front wheel hubs. Kit accepts 3/8" axle. Axle not included. Note: Kit is designed for 45 WLmodels spring forks with rockers that are mounted on the inside of the forks Fitment: WR 1947-1952 Tech...

XR spool wheel internal kit is dual steel flanged and includes the steel tube, 2 sealed ball bearings and accepts a 3/8" axle. Does not include hub. For use with the wheel bearing on WR front spool hubs. Kit accepts 3/8" axle. Axle not included...

Motorshop - Gas Tank Fuel Rod Alignment Tool fits '40-'65 FL, '40-'52 WL Models (OEM #96365-42) Gas tank fuel rod alignment tool corrects alignment of bottom and top holes. Fitment: FL 1940-1965 WL 1940-1952 Instructions: Click here to view...

3 speed and reverse chrome left side tank hand shifter gate, has a 32N1R front to rear shift pattern. The distance center to center of the screw holes is 3.5". Note: Use 1/4"-28 x 1/2" hex head bolts for gate installation Fitment: G...

Zinc plated shift gate hex screws is 1/4"-28 x 1/2", National Coarse. Sold in a pack of 5. Fitment: G 1947-1973 FL 1947-1965

Chrome left side tank hand shifter gate has a 432N1 front to rear shift pattern. The mounting holes measure 3-1/2" center to center. *NOTE: Use 1/4"-28 x 1/2" hex head bolts for gate installation. Fitment: UL 1937-1941 FL 1947-1966 EL...

Wyatt Gatling - Fuel Petcock Shut-Off Rod Kit fits '41-'49 FL Model Kit features complete shut off rod and cadmium plated seat fitting with a left tank reserve. The top cap finish is chrome and the seat finish is cadmium. Includes spring and...

J-Slot air cleaner backing plate is for four bolt Linkert type carburetor. Backing plate is zinc plated. Fitment: FL 1941-1965 WL 1941-1952 UL 1941-1948 Tech Note: Suggested to use with #49-1804, 7" Script Air Cleaner Raw

Swingarm frame oil tank rear mount bracket with spacers features bright zinc plating. Fitment: FL 1958-1984

74 Spring Fork rocker kit features a black finish. Kit includes stud and bushing kit for Spring Fork.Set has raised are where grease fittings are located. Set has exact shape and look for 1940-1948 Big Twins and 1940-1957 Servi-Car. Fitment: FL...

Volt Tech - Mini 12 Volt Battery fits Custom Application for Panhead with 12 Volt Conversion Mini 12 volt battery (12N5.5A-3B) is a dry charged battery. Battery is for 5.5 amps for Panhead custom applications. Do not over fill battery, fill to line...

12 volt 5 AH fully sealed lead acid rechargeable battery with a F1 terminal is for V-Twin steel box conversion. Note: Must order conversion box to house this battery. Use styrofoam to adjust spacing as required Not for electric...

Wyatt Gatling - Raw Inner Primary Drain Fitting fits '37-'48 UL, '41-'64 FL, '36-'52 EL Models (OEM #3803-36C) Inner primary drain fitting features a raw finish. Fitting must be brazed or welded in place. Order tube separately. Fitment: UL...

Inner reinforcement ring is for inner primary. Fitment: FL 1955-1964

Colony - 2071-10 Chrome Inner Primary and Oil Tank Mount Kit fits '37-'48 UL, '36-'40 EL, '41-'64 FL Models Chrome mount kit includes 2 hex screws, springs, cotter pins and washer. Attaches the inner primary to the oil tank and chain guard on top, and...

V-Twin - Footboard Tabs fits '41-'84 FL, '36-'40 EL/UL Models Forged steel footboard tabs for 1" frame tubes. Fitment: EL 1936-1940 FL 1941-1984 UL 1936-1940

Namz - Chrome Distributor Clamp Features: For models with aftermarket/electronic distributor Polished stainless steel construction Simple to install Made in the U.S.A. Kit Includes: 1 chrome allen head bolt for OEM distributor 1 polished...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 7410-1-US -.002” Undersized Threads Spring Bearing Retainer fits '55-'68 Big Twin Models (OEM #24031-55) Features: Easy solution to the problem of oil seeping around the motor sprocket shaft Retainer features a high-quality lip...

Colony - 9401-1 Aluminum Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - 2625-30 Cadmium Rear Fender Mount Kit fits '58-'80 FL/​FLH Models (OEM #8879-30) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made in...

Colony - 2664-5 +.005" Oversized Linkert/Bendix Carburetor Throttle Lever Wire Block Kit fits '36-'65 Big Twin Models (OEM #27450-36) Features: Kit includes cadmium-plated block, screw, cotter pin and brass washers Made in the...

Colony - 2373-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models (OEM #45756-59) - Flat Top Features: Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000...

Colony - 8735-24 Cadmium Valve Cover Screw Kit fits '48-'65 Panhead Model (OEM #3565W) Features: Exact duplicate of original special screws used on Panhead valve covers Made in the U.S.A. Fitment 1965 Harley-Davidson Electra Glide...

Colony - 8161-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Cadium-Plated Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of...

Colony - 8111-12 Cadmium Oil Pump Mounting Hardware fits '36-'67 Big Twin Models (OEM #7035, 27691) Features: 1/4"-24 hard-to-find hex nuts come in a six-pack OEM style kit is a complete kit that includes studs, nuts and hex...

Colony - 9694-19 Parkerized Oil Pump Mounting Hardware fits '36-'67 Big Twin Models (OEM #24819-36, 24820-36, 3834) Features: 1/4"-24 hard-to-find hex nuts come in a six-pack OEM style kit is a complete kit that includes studs, nuts and hex...

Colony - 8740-19 Cadmium Oil Pump Mounting Hardware fits '36-'67 Big Twin Models (OEM #24819-36, 24820-36, 3834) Features: 1/4"-24 hard-to-find hex nuts come in a six-pack OEM style kit is a complete kit that includes studs, nuts and hex...

Colony - 8137-34 Chrome Stock Engine Case Bolt Kit fits '65-'69 FL Model Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FL 1965-1969

Colony - 8488-10 Chrome Cylinder Head Bolt Washer fits '71-'84 FX, '57-'85 XL, '48-'84 FL Models Cylinder head bolt washer chrome finish. Fitment: FX 1971-1984 XL 1957-1985 FL 1948-1984

Colony - 8145-10 Chrome Circuit Breaker Screws fits '41-'65 FL, '36-'65 EL Models (OEM #3779) Circuit breaker screws are used to mount distributors and relays. Fitment: FL 1941-1965 EL 1936-1965

Colony - 8733-24 Cadmium Aluminum Valve Cover Screw Kit fits '48-'65 Panhead Model (OEM #3578W) Features: Exact duplicate of original special screws used on Panhead valve covers Made in the U.S.A. Fitment 1965 Harley-Davidson Electra...

Colony - 9671-20 Parkerized Transmission Kicker Cover Nut Kit fits '36-'84 Big Twin Models (OEM #7835, 7752) Features: Kits include (9) nuts, (9) flat washers, (1) nut and (1) washer Made in the U.S.A...

Colony - 8924-8 Handlebar Throttle Spark Roller and Pin Kit fits '71-'72 FX, '54-'72 FL Models (OEM #56278-10) Handlebar throttle spark roller and pin kit. Fitment: FX 1971-1972 FL 1954-1972

Colony - 8925-3 Fuel Filter Strainer Cap fits '37-'48 UL, '41-'65 FL, '36-'40 EL Models (OEM #62268-32) Fuel filter strainer cap, chrome finish. Fitment: UL 1937-1948 FL 1941-1965 EL 1936-1940 VL 1933-1934 WL 1932-1952

Colony - 8929-8 Linkert Carburetor Mount Screws fits '41-'65 FL Model (OEM #47248-48) Linkert carburetor mount screws with washers Fitment: FL 1941-1965

Colony - 8930-8 Linkert Carburetor Mount Screws fits '41-'65 FL Model (OEM #47248-48) Linkert carburetor mount screws with washers. Fitment: FL 1941-1965

Colony - 8943-27 Headlamp Mount Kit fits '36-'40 EL, '41-'48 FL Models - Cadmium Cadmium headlamp mount kit for Spring Fork Fitment: EL 1936-1940 FL 1941-1948