Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must order coil mount studs separately. Fits:FL...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Kit includes an updated 1.4kW hitachi type black high torque starter and all related components as shown.*NOTE: When fitting to FLH models, a FXE battery will be required to fit FXE battery. Fits:FL 1970-1979FXE 1971-1979 4 speed modelsAdditional...

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Side valve model Burkhardt magneto kit includes complete Burkhardt magneto head, aluminum top, drive assembly and copper wire set.Includes installed black/red kill button. Aluminum Burkhardt covers are also included. Wires must be cut to length. Fits:G...

45" cast top for 45" electric starter kits. Fits:G 1941-1973W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

2020 new production replica dimmer switch with cloth covered wires.Switch may be painted if desired. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J 1926-1929Additional Information UOM1 - EA MeasurementsAdditional InformationHeight: ...

V-Fire completed electronic distributor assembly includes the reverse distributer drive gear conversion to convert to the reverse rotation.*NOTE: Distributor includes internals that require reverse rotation gears! Fits:FL 1941-1969EL 1936-1952Additional...

V-Fire distributor assembly includes top cover, clip, shaft assembly with reverse tooth gear installed and sensor cup.Distributor is designed for a late model electric ignition and uses a reverse drive gear, the drive gear used must be a "reverse...

Generator to alternator 12 volt conversion kit replaces the 6 volt 32E generators on Side Valve 45 and Big Twn Flathead models. Includes a black alternator with chrome end cover and a black solid state regulator.Correct Side Valve generator gear is...

XR/WR magneto idler gear spindle features a steel construction with a raw finish. Accepts a 9mm inner diameter bearing.This is the XR version of the stud. ...

V-Twin - 32-1452 - 1941-69 Big Twin Magneto AssemblyDescriptionAssembly includes Magneto head and adjustable advance. Magneto base has the 2-hole mount flange like 1941-69 type distributors on 1941-1969 FL models.Base is shotted to allow advance and...

Dimmer switch rebuild kit replaces the inter components of the switch.Includes a dimmer switch lever, brass plate backlite insulator, contact base, brass contact, rivets and spring. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J...

Headlamp socket wire includes cloth covered wires and correct bulb 3-prong connector plug. Fits:FL 1960-1969Additional Information OEM No.67753-60 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages1094

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1302

Main wiring harness kit features plastic wires in original factory color codes in vinyl loom with termnals installed. Main wiring harness includes the main turn signal wires.Handlebar and tail lamp wire kits must be purchased separately. Fits:FXR...

Side Valve generator alternator conversion kit will replace 32E, 2-brush or alternators on WL and G models. Kit includes battery box,top cover, gear kit and 5/16" x 24" mounting screws.Alternator has 5/16" x 24 mount holes for screws. Case will have to...

Accel starter solenoid has a zinc finish.Use 4-Speed style solenoid on 1984-1988 FXST 5-Speed models. Fits:FXR 1982-1988FLT 1979-1988Additional Information OEM No.31489-79 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages355

Magneto drive gear set is for use with Burkhardt magneto drive assemblies. Fits:FL 1970-1992Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Wiring harness kit for side valve models Fits:G 1966-1970Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages816

Builders wiring harness kit features plastic wires in original factory color codes in vinyl loom with terminals installed.Builders kit includes handlebar, tail lamp, coil and regulator wires. Fits:FLH 1973-1977FL 1973-1977Additional Information OEM No...

Builders wiring harness kit features plastic wires in original factory color codes in vinyl loom with terminals installed.Builders kit includes handlebar, tail lamp, coil and regulator wires. Fits:FL 1970-1972FLH 1970-1972Additional Information OEM No...

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also included which allow full advance at 1400, 2000 and 2600...

Handlebar wiring harness kit is extended type and color coded. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 47" ManufacturerV-Twin OriginImported 2025 Catalog Pages1047

Wiring harness kit features cotton braided wire and asphalt loom. Wiring kit fits early Big Twin models.Order handlebar and tail lamp wires separately. Fits:FLH 1965-1969FL 1965-1969Additional Information OEM No.70321-65 UOM1 - KIT ManufacturerV-Twin ...

Main wiring harness for XL kick starter models.Order handlebar, tail lamp and turn signal wires separately. Fits:XLCH 1975-1976 kick starter modelsAdditional Information OEM No.70001-75 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages966

Replica starter relay will reduce voltage drop in single fire ignition applications during cranking, and will allow full 12 volt battery voltage to the module and coil. Fits:XL 1973-1979FX 1973-1979Additional Information OEM No.71463-73A UOM1 - EA ...

Directional switch is a three position type with three cloth covered wires. Includes one each of green, red, and black wires and chrome plated housing.Switch features bottom exit wires, and stainless screws. ...

New Old Stock" mechanical brake light black switch pull type. Fits:XLH 1975-1976XLCH 1975-1976Additional Information OEM No.72004-75 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages897

V-Fire Big Twin auto advance distributor assembly features a chrome plated base, body and top. Distributor is completely assembled with gear and all internal parts.Includes updated auto advance points plate, stock hold down clamp and a lead wire. *NOTE:...

Turn signal wiring harness kit has PVC covered wires. Fits:FL 1970-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages689

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately. Fits:FXST 1984-1999FL 1970-1984FLT 1980-1999FXD 1991-1999FXR...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included. White wire is to trigger and blue wire is to switch 12...

Button style handlebar starter or horn switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.71484-72A UOM10 - PK FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages684

Button style handlebar switch is for front brake and comes without wire. Thread is 1/4-32. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.72001-69B UOM10 - PK FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog...

Plain Rocker style handlebar switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM10 - PK FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages684

Battery cable is braided, flat, and unsheathed ground strap.Fits negative terminal on battery. Fits:XLH 1967-1972Additional Information OEM No.70235-67A UOM1 - EA MeasurementsAdditional InformationLength: 8-1/2" ManufacturerV-Twin OriginUSA ...

Wiring loom clip is for side valve rear frame. Fits:G 1939-1967 to Early 1967 Servi-carAdditional Information OEM No.1602-30 UOM4 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages671

Battery cable measures 8-1/2" long. Cable is 4 gauge with 17/64" and 11/32" hole sizes with heat shielded terminal ends.Cable is braided. Fits:FXR 1987-1994FLT 1982-1992Additional Information OEM No.70186-82 UOM1 - EA MeasurementsAdditional...

Battery cable measures 8-1/2" for solenoid to starter.PVC plastic coated cable replaces original with heat shielded terminal ends. Fits:FLT 1982-1984FXR 1985-1988Additional Information OEM No.70100-79A UOM1 - EA MeasurementsAdditional...