Front and rear 1-3/4" header pipes are a one piece seamless design, integrating tapered mufflers. Features bolt on installation.Required to use with an exhaust pipe mount bracket and muffler T bolt set. ...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Tapered muffler set is custom seamless type for Ironhead models. Components available separately. Fits:XL 1980-1984Additional Information UOM1 - KIT ...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid frame only.The angled megaphone adds an extra "kick up"...

Black muffler set features a 3" body outer diameter and measures 20" long with tapered revolver tips.Baffles are not removable. The billet end has less of a taper than V-Twin #30-1611 and #30-1616. Sold as a set. ...

Black muffler set features a 3" body outer diameter and measures 20" long with highlighted revolver tips.The billet end has more a taper than V-Twin #30-1614 and #30-1617. Sold in a quanity a set. **CAUTION:...

Chrome muffler set features a 3" body outer diameter and measures 20" long with tapered revolver tips.Billet end has less of a taper than V-Twin #30-1611 and #30-1616. Sold as a set. **CAUTION:...

Chrome muffler set features a 3" body outer diameter and measures 20" long with highlighted revolver tips.The billet end has more taper than V-Twin #30-1614 and #30-1617. Sold in a set. **CAUTION: These...

XL muffler kit includes two seamless mufflers with inlet clamps and chrome support bar. Kit is for use with Ironhead models and 1-3/4" drag pipes that are cut to length to use with header pipe.Header pipe not included. *NOTE: Suggested to use with OEM...

Magnum 1-3/4" exhaust drag pipe set is constructed of steel featuring a flat black finish and includes heat shields.*NOTE: 2004-2006 models will require the seperate purchase of #30-0423, O2 sensor bung plugs. Fits:XL 2004-2013Additional Information ...

Magnum 1-3/4" exhaust drag pipe set is constructed of steel featuring a chrome finish and includes removable heat shields.*NOTE: 2004-2006 models will require seperate purchase of #30-0423, O2 sensor bung plugs. Fits:XL 2004-2013Additional Information ...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Muffler set is seamless custom type for Ironhead models. Include embossed lines on mufflers. Components available seprately. Fits:XLCH 1959-1978XLH 1957-1978Additional...

Chrome heat shield set with holes for drag pipes.Sold in a quantity of 2. Fits:XL 2007-2013Additional Information OEM No.64601-10 UOM2 - SET ManufacturerV-Twin OriginImported

Black heat shield set with holes for drag pipes.Sold in a quantity of 2. Fits:XL 2007-2013Additional Information OEM No.64601-10 UOM1 - SET ManufacturerV-Twin OriginImported

Replica chrome muffler set with slash cut outlet has 2-1/2" body diameter and 1-3/4" inside inlet diameter.**CAUTION: These exhaust products are not legal for sale or use in Californai on pollution controlled vehicles. these products are intended for...

Alphabet Sportster exhaust header set features a raw finish. Set is used for Sportster Ironhead models.Set will fit stock Sportser models, including 1971-1984 models with forward controls and 1975-1984 models with mid controls. Installation may not be...

Alphabet Sportster exhaust header set features a black finish. Set is used for Sportster Ironhead models.Installation may not be compatible with some forward or mid controls. Front and rear header included. *NOTE: Not connected by equalizer tube. *NOTE:...

XL exhaust system includes 38" long tapered muffler set. The muffler sets have slider channels and mount with hanger bracket, which is included in the set, but will not fit on 1979 Sporsters.One piece seamless design with the tapered muffler welded and...

Alphabet Sportster exhaust header set features a chrome finish. Set is used for Sportster Ironhead models.Set will fit stock Sportster models, including 1971-1984 models with forward controls and 1975-1984 models with mid controls. Installation may not...

Black 2:1 alphabet exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.Set will fit stock Sportster models, including 1971-1984 models with forward controls and 1975-1984 models with mid...

Chrome 2:1 exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.*NOTE: Turn out end not included. Fits:XLH 1971-1984 900cc, 100ccXLCH 1971-1984 900cc, 100ccXL 1971-1984 900cc, 100ccAdditional...

Ironhead LAF exhaust header set features a black finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. *NOTE: Exhaust header set is painted black but has oxidation (rust) on the inside...

Ironhead LAF style header set features a chrome finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. Fits:XL 1957-1985Additional Information UOM1 - SET MeasurementsAdditional...

XL exhaust system features a chrome finish. System includes one piece seamless design with tapered mufflers welded and blended into a 1-3/4" header pipe.Heat shields are highly recommended. *NOTE: Not for legal sale or use in California. Fits:XL...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Componenets available separately. For kick and electric start models. Fits:XLCH 1957-1978XLH 1957-1978Additional Information UOM1 - KIT ManufacturerV-Twin ...

Black exhaust header set with down draft style features a 2" outer diameter construction and oxygen sensor ports welded in place.For Evolution, TC-88, and XL models as listed. Pipes feature 18mm oxygen sensor bungs and includes plugs for non EFI...

Chrome exhaust header set features down draft style slash cut ends with a " outer diameter and oxygen sensor ports welded in place. Bracket included that connects the 2 header pipes together, does not mount to frame.For Evolution, TC-88, and XL models as...

Exhaust oxygen sensor has 18mm X 1.5mm threads. Sensor is for the front or rear cylinder.. Fits:XL 2007-2013 Front or Rear FitmentFLT 2007-2008 Front or Rear FitmentAdditional Information OEM No.27719-07 UOM1 - EA ManufacturerV-Twin OriginUSA 2025...

Chrome 2-1/4" exhaust drag pipe set side slash style features built in mount tabs to bolt to stock bracket.Will work with forward control or mid control models. *NOTE: Hardware not included, must order separately. **CAUTION: These exhaust products are...

Chrome Heat shield set for 1-3/4" drag pipes.Sold in a quantity of 2. Order clamps separately. Front heat shield measures from top down to first bend is 7", to second bend 7", to end 8-1/4". Rear Heat shield measures from the top to the first bend is 5",...

XL chrome 2-1/4" exhaust drag pipe set turn down slash style features built in mount tabs to bolt to stock bracket. Baffles not included.Will work with mid controls, but not with forward controls. **CAUTION: These exhaust products are not legal for sale...

New Old Stock" Replica black crossover heat shield.*NOTE: Must order muffler, clamps and hardware separately. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products...

Replica chrome header set.Set will accept heat shields. Order clamps and muffler separately. Fits:XLCH 1957-1978XL 1957-1978XLH 1957-1978Additional Information OEM No.65491-62 UOM1 - KIT FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog...

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages939

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages939

Drag pipes with oxygen sensor port and slash cut ends features a chrome finish. These pipes have a 1-3/4" diameter and are 34" long.These pipes may be used on 2004-2006 models if oxygen sensor bungs are capped with a oxygen sensor plug. Pipes mount to...

Chrome exhaust drag pipes with slash cut ends are 36" long with a 1-3/4" diameter.Pipes mount to stock bracket and are sold without heat shields and oxygen sensor ports. ...

Sportster holeshot 2:1 exhaust header system features a black finish. System includes 2" header pipes, form fitted 2-1/4" headshield and a 3" baffled muffler. Rear pipe flows forward and wraps around timing cover.*NOTE: Exhaust header set is painted...

Sportster holeshot 2:1 exhaust header system features a chrome finish. System includes 2" header pipes, form fitted 2-1/4" headshield and a 3" baffled muffler. Rear pipe flows forward and wraps around timing cover. Fits:XL 1985-2004Additional Information...

Wyatt Gatling lake style exhaust system is for Sportster models and features a black finish. Exhaust will fit 1985-2004 XL models with mid or forward controls.Exhaust features 2" header pipes, non baffled collector and one piece construction. Fits:XL...

Wyatt Gatling lake style exhaust system is for Sportster models and features a chrome finish. Exhaust will fit 1985-2004 XL models with mid or forward controls.Exhaust features 2" header pipes, non baffled collector and one piece construction. Fits:XL...