S&S Cycle - 330-0624 - Cam Kit - 465G - M8FeaturesKit includes all required bearings, o-rings, and hardwareBolt-in compatible with all stock valve train componentsProvides increased torque and horsepowerMade in the USASpecsApplicationIntakeExhaust Close...

S&S Cycle - 330-0543 - Cam Chest with Plate Kit - 585CE - Easy Start Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves...

S&S Cycle - 330-0620 - Cam Kit - 465C - M8FeaturesKit includes all required bearings, o-rings, and hardwareBolt-in compatible with all stock valve train componentsProvides increased torque and horsepowerMade in the USASpecsExhaust Lift at TDC Imperial0...

S&S Cycle - 330-0105 - Camshaft Kit - 557C Chain Drive - Twin Cam Features Designed for Tri-Glides and other heavy bikes needing good bottom and mid-range performance Camshaft's stock base circle permits the use of stock pushrods Short duration...

S&S Cycle - 330-0470 - MR103 Chain Drive Cam KitFeaturesBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaustBroad torque curve improves output over stock over the entire RPM rangeMade in the U.S.A.SpecsExhaust...

S&S Cycle - 330-0553 - Cam Chest with Plate Kit - 585C - Standard Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves valve...

S&S Cycle - 310-0816 - Cam Chest with Plate Kit - 585GE - Easy Start Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsImproves engine performance - higher lift and optimized cam timingS&S Quickee pushrods - easy installation, without...

S&S Cycle - 330-0544 - Cam Chest with Plate Kit - 551CE - Easy Start Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves...

S&S Cycle - 330-0541 - Cam Chest with Plate Kit - 510C - Standard Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves valve...

S&S Cycle - 330-0540 - Cam Chest with Plate Kit - 509C Standard Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves valve...

S&S Cycle - 310-0815 - Cam Chest with Plate Kit - 551GE - Easy Start Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsImproves engine performance - higher lift and optimized cam timingS&S Quickee pushrods - easy installation, without...

S&S Cycle - 310-0814 - Cam Chest with Plate Kit - 510G - Standard Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsImproves engine performance - higher lift and optimized cam timingS&S Quickee pushrods - easy installation, without...

S&S Cycle - 330-0521 - Hydraulic Cam Chain Tensioner ShoeFeaturesFor use in stock 07-17 Twin Cam engines or 99-06 Twin Cam engines with a hydraulic upgrade cam plate like the S&S TC3bodies machined from 6061 aluminumLarger diameter piston and tighter...

S&S Cycle - 330-0519 - Inner Hydraulic Cam Chain TensionerFeaturesFor use in stock 07-17 Twin Cam engines or 99-06 Twin Cam engines with a hydraulic upgrade cam plate like the S&S TC3bodies machined from 6061 aluminumLarger diameter piston and tighter...

S&S Cycle - 33-4160XX - Double Under Sized Pinion GearFeaturesA four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting...

S&S Cycle - 330-0459 - Easy Start Cam Kit - Twin CamFeaturesStart any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery; tested for 10,000 starts without running battery downAllow for easy start by...

S&S Cycle - 330-0438 - Easy Start Cam Kit - Twin CamFeaturesStart any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery; tested for 10,000 starts without running battery downAllow for easy start by...

S&S Cycle - 330-0442 - HP103 Chain Drive Cam KitFeaturesBolt-in cam for 103” and 106” Big Bore Twin Cam motorsUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustGreat for lighter bikes with strong power from 3500-6000...

S&S Cycle - 330-0466 - Easy Start Cam Kit - Twin CamFeaturesStart any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery; tested for 10,000 starts without running battery downAllow for easy start by...

S&S Cycle - 330-0456 - MR103 Chain Drive Cam KitFeaturesBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaustBroad torque curve improves output over stock over the entire RPM rangeMade in the U.S.A.SpecsIntake...

S&S Cycle - 330-0445 - Easy Start Cam Kit - Twin CamFeaturesStart any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery; tested for 10,000 starts without running battery downAllow for easy start by...

S&S Cycle - 33-4276 - Outer Cam Gears Drive Kit - Twin CamFeaturesA four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting...

S&S Cycle - 330-0093 - Camshaft - 508 Series - Evolution Big Twin Features S&S Cams are tested on the dyno, street and track before being offered to the public With hundreds of hours of testing on each cam, you know you are getting the best...

S&S Cycle - 106-4033 - Camshaft Kit - 475G Gear Drive - Twin Cam Features Bolt-in cam providing power from 2200-5200 RPM in engines with displacement from 107-135 cubic inches Bumps horse power to over 100 and makes bigger power towards top end...

S&S Cycle - 106-4868 - Camshaft Kit - 551G Gear Drive - Twin Cam | Dyna Features Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikes Reverses the rear cam's...

S&S Cycle - 310-1267 - Cam Chest Kit without Cams - Gear Drive - Oil Cooled - Chrome Pushrods - Twin CamFeaturesOil Pump/Cam PlatePrecision machined from billet aluminumPassage plugs are removable for servicingIndependent scavenge sections for flywheel...

S&S Cycle - 310-1266 - Cam Chest Kit without Cams - Gear Drive - Oil Cooled - Black Pushrods - Twin CamFeaturesOil Pump/Cam PlatePrecision machined from billet aluminumPassage plugs are removable for servicingIndependent scavenge sections for flywheel...

S&S Cycle - 330-0732 - Camshaft Kit - 590G - Gear Drive - M8 Features Designed specifically for use with monster bores and ported heads (not recommended for stock bore engines) Improves cam timing accuracy and eliminates the stock cam...

S&S Cycle - 330-0730 - Camshaft Kit - 590C - Chain Drive - M8 Features All-out horsepower cam for 124” and larger engines Designed specifically for use with monster bores and ported heads (not recommended for stock bore engines) Kits...

S&S Cycle - 330-0715 - Camshaft Kit - 540G Gear Drive - M8 Features Designed to add even more torque to your big bore M8, for those that keep the revs below 6000 rpm when combined with 124" and larger big bore kits Requires the use of adjustable...

S&S Cycle - 330-0713 - Camshaft Kit - 540C Chain Drive - M8 Features Designed to add even more torque to your big bore M8, for those that keep the revs below 6000 rpm when combined with 124" and larger big bore kits Requires the use of...

S&S Cycle - 310-1083A - Cam Chest Kit with Plate - Gear Drive - Oil Cooled - 550 Cam - Chrome Pushrods - M8FeaturesAll parts in each kit are matched to ensure superior quality, fit, finish and performanceOil pump and cam plate are precision-machined from...

S&S Cycle - 310-1006A - Cam Chest Kit with Plate - Gear Drive - Oil Cooled - 475 Cam - Chrome Pushrods -M8FeaturesAll parts in each kit are matched to ensure superior quality, fit, finish and performanceOil pump and cam plate are precision-machined from...

S&S Cycle - 310-1005A - Cam Chest Kit with Plate - Gear Drive - Oil Cooled - 465 Cam - Chrome Pushrods - M8FeaturesAll parts in each kit are matched to ensure superior quality, fit, finish and performanceOil pump and cam plate are precision-machined from...

S&S Cycle - 330-0546 - Cam Chest with Plate Kit - 585CE - Easy Start Cams - Twin CamFeaturesUpgrade to S&S bolt-in performance camshaftsS&S Quickie pushrods - easy installation, without removing rocker coversS&S hydraulic cam chain tensioner improves...

S&S Cycle - 330-0647 - Camshaft Kit - 550G Gear Drive - M8 Features Kit includes all required bearings, o-rings, and hardware Ideal horsepower cam for 114" and larger engines Maximizes peak torque and horsepower Designed for big bore...

S&S Cycle - 310-0856 - Crankcase - 4.125" Bore w/Stock Bolt Pattern - Wrinkle Black - DynaFeatures4.125" bore crankcase can be used as a foundation for a custom engine or replacement for T111, T124, or T143Stock looking, but stronger; thicker wall...

S&S Cycle - 31-0078 - Engine Case - Super Stock® Big Bore - 3.625" - Evolution Big TwinFeatures3.625" big bore cylinder case for any stroke up to and including 5" and most stock length connecting rodsMachined to accept an oil filter assembly that mounts...

S&S Cycle - 310-0878 - Crankcase - 3.937" Bore - Alternator Style - Wrinkle Black - DynaFeatures4.125" bore crankcase can be used as a foundation for a custom engine or replacement for T111, T124, or T143Stock looking, but stronger; thicker wall sections...

S&S Cycle - 31-2100 - REED VALVE, 84-99 +.030FeaturesNew-style breather is not dependent on the rotation of the crankshaft to make it open and close. Instead, reeds open when pressure in the crankcase becomes greater than pressure in the cam chest, and...