S&S Cycle - 330-0718 - Precision Tappet Set Features Reduced valve train noise from start up to shut down Close tolerances for low leak down rates Fast pump up and superior high rpm performance Each Precision Lifter is hand assembled to...

S&S Cycle - 33-5353 - Lifters with HL?T KitFeaturesRollers have a larger-than-stock inner bearing race that reduces stress and increases axle lifeEach lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct operationRedesigned...

S&S Cycle - 330-0655 - Tappet Cuffs Lifter Guide - M8FeaturesBillet aluminum construction with hard anodized black coatingEasy upgrade when changing tappets or doing a cam changeImprove tappet stability in high lift and high rpm situationsFactory tappet...

S&S Cycle - 106-1340 - Pushrod Cover Kit - ChromeFeaturesStock heightKit includes top and bottom covers, cover caps, cover springs, and spring washersSpecsColor/FinishChromeProduct NamePushrod Cover KitUnitsKitRiding StyleStreetFitment2005...

S&S Cycle - 33-5352 - Hydraulic Tappets - Big TwinFeaturesRollers have a larger-than-stock inner bearing race that reduces stress and increases axle lifeEach lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct...

S&S Cycle - 930-0124 - Pushrod Tubes - BlackFeaturesStylish Black pushrod tubes enhance the look of your engineGreat match for the Black engine covers offered on some new HD modelsPushrod Tubes onlyRequires separate purchase of keepersSpecsRiding...

S&S Cycle - 930-0138 - Pushrod Cover Keeper Set - Gloss Black - M8FeaturesFor use in custom applications where stock keepers won't fitChromed steel finishSold in kits of four assemblies; enough for one engineSpecsColor/FinishGloss...

S&S Cycle - 930-0123 - Quickee Pushrod Kit with Chrome Covers - M8FeaturesKit includes four S&S Quickee pushrods, four pushrod covers and O-ringsPushrods are manufactured from chromoly steel for superior strengthMade in the USAKit does not require rocker...

S&S Cycle - 93-4022 - Pushrod Cover O-Ring KitFeaturesFor O-ring style bottom coverIncludes all parts for four pushrods: top, middle and bottom O-ringsSpecsRiding StyleStreetUnitsEachProduct NameO-Ring KitTypePushrod CoverFitment2002-2003 Harley-Davidson...

S&S Cycle - 930-0052 - Time Saver Pushrods - Big Twin | ShovelheadFeaturesPushrods adjust from 9.500" to 11.500"9 mm diameter provides superior strength and durabilityRemoval of rocker boxes is not requiredAdjusting end is .354\Made in the U.S.A.Not for...

S&S Cycle - 93-5120 - Quickee Pushrods - Big TwinFeaturesFeatures revolutionary design - allows quicker, easier installation without the removal of the rocker covers.4375” diameter Chromoly steelThreaded adjuster screws into the pushrod until the threads...

S&S Cycle - 900-1084 - Roller Rocker Arms - M8FeaturesForged from 8620 steel, heat-treated then shot-peened for additional strength and durabilityRocker arms have .75" long bushings instead of the .50" long bushings found on most other rocker armsFeature...

S&S Cycle - 900-1092 - Rocker Arm Guardian Kit - M8FeaturesRocker Arm shafts, Rocker Arm Stud Kit, Head Bolt Kit and Performance Roller Rocker Arms are included in this kitRocker Arm ShaftsReplace broken or worn OEM pieces with stronger, more durable S&S...

S&S Cycle - 900-1087 - Rocker Arm Rebuild Kit - M8FeaturesForged from 8620 steel, heat-treated then shot-peened for additional strength and durabilityRocker arms have .75" long bushings instead of the .50" long bushings found on most other rocker...

S&S Cycle - 900-4119RA - Forged Standard Rocker ArmFeaturesAn economical solution for stock rebuilds, and mild performance upgradesForged from 8620 steel for greater strength than stock or cast steelFeature the same .750" long rocker shaft bushings as...

S&S Cycle - 900-4119FA - Forged Standard Rocker ArmFeaturesAn economical solution for stock rebuilds, and mild performance upgradesForged from 8620 steel for greater strength than stock or cast steelFeature the same .750" long rocker shaft bushings as...

S&S Cycle - 90-4006 - Rocker Arm Shaft - Twin Cam/XLFeaturesMade in the U.S.A.SpecsRiding StyleStreetUnitsEachProduct NameShaftTypeRocker ArmFitment1997-2000 Buell M2 Cyclone1996 Buell S1 Lightning1998 Buell S1 White Lightning1994 Buell S2...

S&S Cycle - 900-4065A - Roller Rocker ArmsFeaturesForged from 8620 steel, heat-treated then shot-peened for additional strength and durabilityRocker arms have .75" long bushings instead of the .50" long bushings found on most other rocker armsFeature a...

S&S Cycle - 900-4098A - Roller Rocker ArmsFeaturesMachined from 8620 forged steel and heat treated for maximum strengthFeature the exclusive .750" long S&S rocker arm bushing which provides 50% more load bearing surface than stock .500" bushingsCan be...

S&S Cycle - 900-4119A - Non-Roller Rocker ArmsFeaturesAn economical solution for stock rebuilds, and mild performance upgradesForged from 8620 steel for greater strength than stock or cast steelFeature the same .750" long rocker shaft bushings as S&S...

S&S Cycle - 90-4104 - Rocker Arm Rebuild KitFeaturesForged from 8620 steel, heat-treated then shot-peened for additional strength and durabilityRocker arms have .75" long bushings instead of the .50" long bushings found on most other rocker armsFeature a...

S&S Cycle - 900-0958 - Spring Kit - .605" - M8FeaturesUnique S&S design dual-spring kit reduces the risk of valve floatIncludes springs, top and bottom collars, keeper shims and valve sealsMade in the USAFor valve lift with 1.800" /130 lb installed...

S&S Cycle - 90-2210 - Valve Guide - Standard - Big TwinFeaturesCast iron intake/exhaust guideFits S&S Super Stock and stock Harley Davidson cylinder headsGuide ID measures approximately .309" / .310" with enough material left for proper clearancingMade...

S&S Cycle - 33-5109 - Camshaft - 585V - Evolution Big Twin Features S&S Cams are tested on the dyno, street and track before being offered to the public With hundreds of hours of testing on each cam, you know you are getting the best cam...

S&S Cycle - 31-0078 - Engine Case - Super Stock® Big Bore - 3.625" - Evolution Big TwinFeatures3.625" big bore cylinder case for any stroke up to and including 5" and most stock length connecting rodsMachined to accept an oil filter assembly that mounts...

S&S Cycle - 31-2100 - REED VALVE, 84-99 +.030FeaturesNew-style breather is not dependent on the rotation of the crankshaft to make it open and close. Instead, reeds open when pressure in the crankcase becomes greater than pressure in the cam chest, and...

S&S Cycle - 31-0055 - Engine Case - Super Stock® - 3.500" - Evolution Big TwinFeatures3.5" stock bore cylinder case for any stroke up to and including 5" and most stock length connecting rodsMachined to accept an oil filter assembly that mounts on the...

S&S Cycle - 31-2096 - REED VALVE, 93-99 STDFeaturesNew-style breather is not dependent on the rotation of the crankshaft to make it open and close. Instead, reeds open when pressure in the crankcase becomes greater than pressure in the cam chest, and...

S&S Cycle - 94-9254 - Wrist Pin Circlips - Harley Davidson Features For use with S&S Cycle wrist pins Sold in pack of 4 Specs Units 4 Pack Application Piston Riding Style Street Type Pin Product...

S&S Cycle - 33-5108 - 640 Cam - EvolutionFeaturesS&S Cams are tested on the dyno, street and track before being offered to the publicWith hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produceFor large...

S&S Cycle - 34-4010 - Rod Bearing - Big Twin 41-99FeaturesHigh-quality OE replacement componentsMade in the U.S.A.SpecsUnitsKitRiding StyleStreetApplicationConnecting RodProduct NameBearingTypeRollerFitment1984 Harley-Davidson Disc Glide FXRDG1995-1998...

S&S Cycle - 31-4013 - Bearing - LeftFeaturesUsed as OEM replacement components on 84-02 models and for Timken bearing conversions on 03-16 modelsMade in the U.S.A.Replacement Part for OEM Number(s): 9028SpecsApplicationSprocket ShaftUnitsKitRiding...

S&S Cycle - 31-4009 - Cam Bearing - Big Twin Features Superior quality OE replacement bearings Made in the U.S.A. Specs Product Name Bearing Riding...

S&S Cycle - 34-4007 - Wrist Pin Bushing - Big Twin Features Meets or exceeds fitment and wearability of OEM bushings Measures 0.767" x 0.895" x 1.077" Made in the U.S.A. Specs Product Name Bushing Riding...

S&S Cycle - 31-4004 - Ride Side Crankcase Bearing Race - Standard - Big TwinFeaturesMade in the U.S.A.SpecsProduct NameRaceRiding StyleStreetApplicationCrankcaseUnitsEachSizeStandardFitment1995-1998 Harley-Davidson Dyna Convertible FXDS-CONV1995-1998...

S&S Cycle - 320-0603 - Flywheel AssemblyFeaturesMade of high-strength forged steel and designed for stock and high-performance custom applicationsSpecial keyed 6  large diameter tapered sprocket shaft that provides more contact area for increased...

S&S Cycle - 34-4040 - Race Bearing Set - Big TwinFeaturesUsed to rebuild S&S and stock connecting rodsIncludes hardened steel rod bearing races and bronze wrist pin bushingsRequires finish sizing after installationMade in the U.S.A.Not for use on Twin...

S&S Cycle - 320-0598 - Flywheel AssemblyFeaturesMade of high-strength forged steel and designed for stock and high-performance custom applicationsSpecial keyed 6  large diameter tapered sprocket shaft that provides more contact area for increased...

S&S Cycle - 320-0477 - Flywheel - EvolutionFeaturesReplacement Flywheel Assemblies for Twin Cam MotorsS&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpinFlywheel assemblies are...

S&S Cycle - 32-2230 - Flywheel Assembly - Big TwinFeaturesMade of high-strength forged steel and designed for stock and high-performance custom applicationsSpecial keyed 6  large diameter tapered sprocket shaft that provides more contact area for...