V-Twin - 25-1/2" Hard Chrome 35mm Fork Tube Set fits '85-'86 Sportster & FXR Models (OEM #45392-83) Features: Hard Chrome 35mm fork tube set has stock length of 25-1/2". For Showa front ends Before installing, compare new and old tubes Be sure the...

Colony - Motor Case Kit fits '79-'95 Big Twin Models - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Performance Machine - Throttle Housing fits Dual Thread-In Cables Features: For 1" handlebars Made in the U.S.A. Fitment 1995 Harley-Davidson Dyna Convertible FXDS-CONV - - 1995 Harley-Davidson Super Glide...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

Drag Specialties - Chrome Oil Tank fits Most Aftermarket FXR Frames (OEM #62406-81) Features: Formed steel construction with a chrome finish Bolt-in application; uses OEM mounts Fittings, clamps and hoses included Approximately 3.0 quart...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers, premium bronze bushing and factory pre-lubing. Fitment:...

V-Twin - Chrome Handlebar Control Kit 5/8" Bore Master Cylinder fits '84-'95 FX/XL & FXR Models Features: Chrome handlebar control kit, 3/4" bore, includes master cylinder, clutch handle with clamps, and two pairs of switch housings Master cylinder...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit measures 48" long and has a chrome finish. Fitment: FXR...

V-Twin - Swingarm Bearing Kit with Spherical Bearings fits '82-'02 FLT, '82-'94 FXR Models Swingarm bearing kit with spherical bearings controls lateral and torsional movement at pivot point Kit Includes: Swingarm retaining ring rear fork, nylon...

V-Twin - Black Front 1 Piston Caliper Set fits FXR & XL Models (OEM #44195-80) Features: Caliper set includes body, 1 piston, seals right and left, brake pads and inner and outer plates flat black finish Order mounting hardware separately Sold as a...

V-Twin - 35mm Fork Tube Set 23-3/8" fits '87 FXR, '86-'08 Sportster Models (OEM #45407-86) - Chrome Features: Fork tube set has stock length of 23-3/8" Before installing, compare new and old tubes Be sure the stock top plugs it into the new fork tubes...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer, cotter pin and the master cylinder, which includes the...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Linkage Kit fits '81-'84 FXR Model FXR shifter linkage kit includes rod, heel toe shifter lever , shifter lever, V-Tech inspection cover and inner shifter lever. Fitment: FXR 1981-1984 early 1984 FXR 1984-1984 early 1984

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary cover ...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1984 FXR 1985-1994

V-Twin - Mid Control Kit fits '82-'86 FXR Model - Black Features: FXR mid control kit features a black peg brackets and polished brake pedal Factory style components for installation Order brake line, reservoir feed line and additional hardware...

V-Twin - Mid Control Kit Black W/ Gaskets & Footpegs fits '87-'93 FXR Model FXR mid control kit includes black foot peg mounts, polished brake pedal, primary insepction cover, chrome shifter and a chrome master cylinder Kit Includes: Factory style...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation. Order brake line, reservoir feed line and additional...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the thread. Note: The clevis pin is not included Fitment: ...

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

V-Twin - 39mm Triple Tree Set Polished fits '88-'03 Sportster, '88-'94 FXR Models 39mm FXR triple tree set includes a polished top and lower tree. Fitment: FXR 1988-1994 XL 1988-2003

V-Twin - Stock Kickstand Black fits '82-'90 FXR Model Features: Stock length kickstand features a black finish and is for FXR models Pin not included, must order separately Fitment: FXR 1982-1990

V-Twin - Electrical Wiring Panel Set Black fits '86-'94 FXR Model Features: Black flat left and offset right FXR electrical wiring panel set Panels mount by 1/4"-20 well nuts and 1/4" x 20 x 3/4" screws The right side accepts a starter relay and 4...

V-Twin - Fuel Petcock Alloy fits '82-'94 FXR Models Fuel petcock with 90° elbow features an alloy finish specifically designed for FXR models. Note: Petcock has a 5/16" fuel outlet. Fitment: FXR 1982-1994

V-Twin - Rear Axle Kit Zinc Plated fits '82-'94 FXR Model FXR rear axle kit includes zinc plated components and has a 3/4" diameter. Fitment: FXR 1982-1994

V-Twin - Dash Panel fits '95-'03 FXD, '88-'94 FXR Models (OEM #67185-88, 67189-95) This dash panel features a black or chrome finish. For FXD and FXR models, accepts 85MM GPS speedometers and electric tachometers. Can be installed on 1948-1984 2 piece...

V-Twin - Black Harley Choke Cable Assembly (OEM #29229-88D) Choke cable assembly includes knob, casing, and inner wire featuring a black finish. Fitment: XL 1988-UP FLT 1993-2006 FLST 1993-2006 FXR 1993-1994 FXD 1991-2006 FXST 1993-2006

V-Twin - Evolution Intake Manifold Conversion Kit (OEM #27019-83) Evolution intake manifold conversion kit converts stock rubber compliance fittings to a more rigid mount system. Includes flange set and seals. Kit features a natural finish. Kit includes...

Maxima Racing Oil - Evolution Mineral 20W-50 Oil Change Kit fits '84-'99 Evolution Big Twin Models (Except 91-98 Dyna) Features: Comes with all necessary products to complete a full oil change Includes engine oil, transmission oil, primary oil plus...

Original Garage - 39mm Speed Fork Brace Introducing our V2 Fork Brace. Its stronger construction provides even better resistance to deflection and twisting in the forks while being 15% lighter than the original design. Our billet OG Speed Fork Brace...

Original Garage - T-Sport Fairing kit for Harley-Davidson Dyna, Sportster & FXR Original Garage's T-Sport Fairing kit reproduces the classic FXDXT fairings. This kit includes everything you need to improve wind deflection on your...

Original Garage - Mid Control Highway Peg Crash Bar fits Harley-Davidson Dyna & FXR Models Original Garage's Crash Bar fits on the highway pegs and functions as standard highway pegs while also protecting your bike from crashes and tipping over...

Colony - Rear Brake Disc Rotor to Hub Screw & Nut Kit fits '79-'91 FX, '79-'85 XL & '81-'84 FL Features: Zinc plated allen screws and locknuts Fitment 1991 Harley-Davidson Dyna Sturgis...

Colony Machine - Crankcase Oil Screen & Spring Kit fits '70-'99 Big Twin & All Aftermarket Cases (OEM #24981-70, 24982-70) Features: Tappet screen and spring Made in the USA Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Allen Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - Head Bolt Set fits '99-'17 Twin Cam & '92-'22 Sportster Models (Except RH Sportster (OEM #16478-85A, 16480-92)) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Softail Slim S...