James Gaskets - JGI-17042-92-SS - Rocker Cover Kit Gasket - Fits '84-'99 S&S Evolution Models Fits: '84-'99 S&S Evolution Models. Full year/model list is on the Fitment tab. Rocker Cover Kit Gasket from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-SE-1 - Fire-Ring™ Exhaust Gasket Kit - Fits '66-'84 Shovelhead Models Fits: '66-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Fire-Ring™ Exhaust Gasket Kit from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-45849-75 - 35 mm Fork Seal Kit - Fits 'L75-'E84 FX, FXR & Sportster Models Fits: 'L75-'E84 FX, FXR & Sportster Models. Full year/model list is on the Fitment tab. 35 mm Fork Seal Kit from James Gaskets, the gasket outfit Harley...

James Gaskets - JGI-81-FLH - Oil Pump Repair Paper Gasket/Seal Kit - Fits '84-'91 Evolution Big Twin, '81-'84 Shovelhead Models Fits: '84-'91 Evolution Big Twin, '81-'84 Shovelhead Models. Full year/model list is on the Fitment tab. Oil Pump Repair Paper...

James Gaskets - JGI-33031-70 - 4 Speed Transmission Gasket Kit - Fits '36-'86 Big Twin Models Fits: '36-'86 Big Twin Models. Full year/model list is on the Fitment tab. 4 Speed Transmission Gasket Kit from James Gaskets, the gasket outfit Harley builders...

James Gaskets - JGI-17052-99-X - 95" Top End Gasket Kit - Fits '99-'04 Twin Cam Models Fits: '99-'04 Twin Cam Models. Full year/model list is on the Fitment tab. 95" Top End Gasket Kit from James Gaskets, the gasket outfit Harley builders have trusted...

James Gaskets - JGI-27002-00 - 44 mm Carburetor Intake Manifold Seal Kit - Fits '99-'06 Twin Cam & '88-'06 Sportster Models Fits: '99-'06 Twin Cam & '88-'06 Sportster Models. Full year/model list is on the Fitment tab. 44 mm Carburetor Intake Manifold...

James Gaskets Keihin CV Carburetor Rebuild Kit for 1988-2006 Big Twin & Sportster Fits: All 1988-2006 Keihin CV carbs (Big Twin and XL). Full year/model list is on the Fitment tab. Needles, O-rings, seals and gaskets for a complete rebuild of the...

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...

Jims - 939 Sealed Wheel Bearing Tool fits '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-ROD Models Features: Removes and installs 3/4", 1" and 25 mm wheel bearing with or without Anti-Locking Brake System (ABS) Made in the U.S.A...

Jims - 34902-84-3 Replacement Puller Plate fits 'L84-'20 Big Twin Models Features: Replacement puller plate for Jim's mainshaft bearing race tool Made in the USA

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...

Jims - 5502 Ultimate Clutch Adjusting Tool fits '85-'20 Big Twins Models w/ Mechanical Clutch Features: Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position No more guessing or...

Jims - 5534 Compensator Bolt Driver Torx Socket fits '14-'21 Big Twin Models Features: Correct-style driver/socket for the compensating sprocket retaining fastener Made in the USA For use with Jim's part# 10500031 compensator bolt...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 1075 Cylinder Stud Installer fits all Evolution Big Twin & Sportster Models Features: Assembly tool features a captive hardened ball bearing dimensionally set 1" from top of tool Works on all Evolution Big Twin and XL models Made in the...

Jims - 966 Starter Jackshaft Seal Installer Tool fits '94-'06 Big Twin Models (Except '06 Dyna (OEM #120-66)) Features: Easily aligns and installs starter jackshaft seal without distorting or damaging seal Seal is located in upper part of inner...

Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/​FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...

Jims - 915 Installation Inner Ball Bearing Tool fits '00-'17 Twin Cam “B” Motors Models Features: Accurately and safely install the inner balancer bearing mounted in the left engine case All done on a work bench without using an arbor...

Jims - 1278-3 Camshaft Bearing Installation fits '99-'17 Twin Cam Models Features: Replacement drive for JIMS® Cam Bearing Installation Tool

Jims - 780 Seal Leak Tester Tool fits '00-'17 Twin Cam “B” Motors Model Features: Required to seal the oil passage way from right case to the balancer tensioner plate; leaking can cause over oiling of the lower end that decreases...

Jims - 902 Blue Motor Stand fits '00-'17 Twin Cam “B” Motor Model Features: Makes working on motors easier with better access Made in the USA Note: For Twin Cam "B" motor.

Jims - 1042-7 Expander Dowel Tool fits All '00-'17 Twin Cam, '00-'22 Sportster & '02-'17 V-Rod Models Features: Removes and installs 3/4", 1", and 25 mm wheel bearings with or without (Anti-Lock Brake System) ABS Made in the U.S.A.

Jims - 5532 Vacuum Tappet fits '84-'20 Big Twin Models w/ Hydraulic Tappet Assemblies Features: Removes the risk of using the starting system to pump up the lifters or damage to the valve train at low rpm if the lifters are not fully bled Special...

Jims - 5809 Cylinder Hold Down Tool fits '17-'20 M-Eight & '99-'17 Twin Cam Models Features: Useful when installing the second cylinder over the piston and rings after the first cylinder has been installed One end fits Twin Cam models, while the...

Jims - 775 Removal/Installation Main Seal Tool fits '99-'17 Twin Cam Models Features: Install and remove crank case main seal while the engine is still in the chassis Includes necessary adapters for '88 and '96 Twin Cams Made in the U.S.A.

Jims - 5506 Magnetic Tappet Holder fits all Twin Cam & M-Eight Models Features: Never turn the engine over if the tappet will not spin with your fingers after adjustments were made It is very important that the engine is not rotated while...

Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/​FLHT/​FXR, '84-'99 Big Twins & '84-'00 FLHT/​FXR/​FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...

Jims - 1147 Alternator Rotor Puller fits '97-'06 Big Twin Models Features: A must-have tool for 45A charging systems; will also work on any Harley-Davidson® alternator system that has threaded puller holes Tool protects threads on sprocket shaft...

Jims - 95660-77 4-Speed Seal Driver fits '82-'86 Big Twin Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 1986 Harley-Davidson Softail Heritage...

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A...

Jims - 1146 Crankshaft Bearing Installer fits '00-'17 Twin Cam “B” Motors Models Features: Designed to protect engine cases by using a specially-designed support block to remove or install cam side crankshaft bearing Made in the U.S.A...

Jims - 1167 Balancer Shaft/Removal Bearing Tool fits '00-'06 Twin Cam “B” Motors Models Features: Installing portion is designed to push on the outer diameter of bearings preventing any damage to the bearing or it's bore Pulls the...

Jims - 1169 Compression Release Valve Installation Kit fits Twin Cam Models Features: Installation kit includes fixture, drill bit, spot face bit and thread-tapping tool Simply drill, spot face, tap and install compression release valves Works on...

Jims - 1111 0.108" Camshaft Pinion Gauge Pins fits '90-'99 Big Twin Evolution Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...