Seat spring kit is for use with stock seat "T" on rigid frame models.Kit includes a set of two 7" seat springs with loop mounts for lower studs, a three piece 1" I.D. clamp set, seat stud set, spring stud set, nyloc nuts and flat washers. Fits:FL...

Seat T rear strap with radius corners features a raw finish. Fits:FL 1941-1980Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleCustom 2025 Catalog Pages1250

Clamp kit includes complete parkerized bolt set and stainless steel muffler clamps. The front pipe clamps are also parkerized.Header clamp set not included. Fits:FL 1941-1957EL 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...

License plate frame bracket kit includes accurately formed plate bracket with correct screws and flex nuts. Fits:FL 1947-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1131 Replacement Items2778-4 - Tail...

Replica license plate bracket with countersunk screw holes and features a black finish.For installation on original guide tombstone tail lamps. Attaches with two tapered screws. This is a Guide licensed product. Holes measure 1-1/8" center-to-center and...

Oil tank mount plate features a parkerized finish and is for use to wrap around oil tank for 45 Solo models. Fits:W 1941-1952G 1941-1963Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #40-0694 45 Solo...

Parkerized rear muffler clamp is the early type with a hole not a slot at the top and mounts to the frame cross brace.Special for 1936-1940 EL models. Fits:EL 1936-1940Additional Information OEM No.1064-32 UOM1 - EA ManufacturerV-Twin OriginImported

Chrome exhaust system clamp kit.Header clamp set not included. Fits:FL 1941-1957EL 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages653

Parkerized exhaust system clamp kit.Header clamp set not included. Fits:FL 1941-1957EL 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages653

Spotlamp bracket set for Guide lamps features cadmium plating. Fits:EL 1938-1948FL 1941-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages1113

Black front exhaust header has a flat connector pipe that features exact riveted construction.*NOTE: Tapered flange as original, for detail and fit. End fitting to flat pipe, 1/2" longer than original for better alignment and find. Adjust length as...

Rear upsweep extension pipe features a chrome finish and is for use in rigid frames.Fits into flat pipe on Panhead and Knucklehead models. Fits:EL 1936-1947FL 1948-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech...

Black exhaust header set consists of a front pipe and a rear pipe for solo models. Fits:WL 1937-1952Additional Information OEM No.65490-41 UOM1 - KIT FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages818

Knucklehead rear upsweep pipe features a chrome finish. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Chrome long style WRTT exhaust extension. Fits:W 1930-1952Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter: 1-3/4"Overall Length: 30" ManufacturerV-Twin OriginImported

V-Twin - 30-0884 - Replica Knucklehead Muffler ChromeDescriptionReplica chrome muffler features a spot seam welded body construction with formed ends.The muffler body has a diameter of 3-1/4" with a 1-3/4" diameter inlet. The overall length is 27-1/4"...

V-Twin - 30-0880 - Replica Knucklehead Muffler BlackDescriptionReplica black muffler features a spot seam welded body construction with formed ends.The muffler body has a diameter of 3-1/4" with a 1-3/4" diameter inlet. The overall length is 27-1/4"...

Chrome 80cm long style WRTT exhaust extension with 1-7/8" inner diameter to fit over 1-3/4" outer diameter exhaust pipes.*NOTE: Required joint and mount clamps, not included. Fits:FL 1941-1965Additional Information UOM1 - EA MeasurementsAdditional...

Exhaust heat shield set features the original factory design with a chrome finish.Features holes that go through the shield to install the two screws for installation on a 1-3/4" OD exhaust tubing. Includes two screws, two lock washers and two nuts...

Knucklehead exhaust kit includes 4 pipes, a clamp set and Colony hardware for installation purposes. The clamps and bolts feature a parkerized finish and the pipes are black heat paint.Order mufflers separately. Kit is packaged inside a 5 gallon Oilzum...

Flat pipe the "squash" type, comes with a tab and features a chrome finish.*NOTE: The edge is ground off to allow for clearance on thicker heavy duty cases. The tab can be tilted by use of an adjustable wrench to give correct angle for installing mount...

45 Exhaust header set is an accurately formed black header pipe set which includes a chrome flex cover set.The outer diameter where the pipe attached to the head measures 1.459". ...

Kit includes a chrome 24" cigar style muffler and a Bronx muffler tail to fit 1-3/4" pipes.*NOTE: Exhaust clamps not included. Fits:FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages656 Replacement...

Cover is flexible with an outer diameter of 1.65" and fits over 1-1/2" outer diameter exhaust headers. Open length is 14-1/2" for front, and 9" for the rear.Sold in a quantity of 2. Fits:G 1933-1973WL 1936-1952Additional Information UOM1 - SET ...

Replica tubing set is chrome with a 1-7/8" inner diameter. This bendable slinky type tubing fits over 1-3/4" pipes. Constructed of steel.Set includes one 10" cover and one 11-1/2" cover. Sold in a quantity of 2. Fits:FL 1941-1969EL 1936-1940Additional...

Chrome exhaust header set consists of a front pipe and a rea r pipe for solo models. Fits:WL 1937-1952Additional Information OEM No.65490-41 UOM1 - SET ManufacturerV-Twin OriginUSA

Raw exhaust header set consists of a front pipe and a rear pipe for solo models.*NOTE: Order clamps, muffler, flex covers or any other pieces needed separately. Fits:WL 1937-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Chrome front exhaust header has a flat connector pipe that features exact riveted construction.*NOTE: Tapered flange as original, for detail and fit. End fitting to flat pipe, 1/2" longer than original for better alignment and find. Adjust length as...

Chrome exhaust system is a 3 piece set with a 1-3/4" inlet.*NOTE: Y-pipe not included. Must order separately, a Y-pipe or muffler with built in Y-pipe to complete exhaust system. Fits:UL 1937-1940Additional Information UOM1 - KIT ManufacturerV-Twin ...

Raw steel finish exhaust system is a 3 piece set with 1-3/4" inlet.*NOTE: Y-pipe not included. Must order separately, a Y-pipe or muffler with built in Y-pip to complete exhaust system. Fits:UL 1937-1940Additional Information UOM1 - SET ...

Replica black exhaust header is designed to replace stock style 1-3/4" outer diameter pipe systems.Sold as a 4 piece set. Produced with all new tooling, new fixtures and dies that are used to manufacture all 4 pieces. This pipe set fits like a glove!...

Chrome exhaust system comes in a 4 piece set with build in Y and uses standard 1-3/4" inlet mufflers. Fits:UL 1941-1948ULH 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages818

Raw exhaust system comes in a 4 piece set with build in Y and uses standard 1-3/4" inlet mufflers.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits:UL...

Black Knucklehead exhaust header three piece set for use on mufflers with built in "Y" junction.Four piece header set. Fits: EL 1936-1940 FL 1941-1947 Additional Information UOM 1 - KIT Finish Black Manufacturer V-Twin Origin Imported 2025...

Starter crank and kick starter pedal mounting kit with zinc plated finish. Fits:FLH 1941-1967FL 1941-1967Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages544

Parkerized starter crank and kick starter pedal mounting kit. Fits:FLH 1941-1967FL 1941-1967Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages544

Rear axle spacer features a parkerized finish. Fits:WL 1938-1952Additional Information OEM No.41593-38 UOM1 - EA ManufacturerV-Twin OriginUSA

Brake/clutch pedal pad set is rectangular shaped, with rubber construction, slide into place. Original design from the 1940's. Fits:FL 1941-1984EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages579

Hummer driver footpeg rubber. Stock OE replacement type.Sold in a quantity of 2. Fits:Hummer 1947-1964Additional Information OEM No.50940-55 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages820

Buddy seat foot rest rubber set. Use to mount to stock OE footboards.Sold in a quanity of 2. Fits:WL 1941-1952FL 1941-1964UL 1938-1948Additional Information OEM No.50940-47 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages1253