Jims - 1807 - Hydraulic Tappet - Twin CamFeaturesThese tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacitiesBillet bodyIncreased roller widthRoller perpendicularity held to .0002"Hand-honed hydraulic...

Feuling Parts - 4052 - Lifters - Race Series® - Oversize - Twin CamFeaturesFull-travel hydraulic lifters made from machined steel designed with .200" of travelExceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down...

Feuling Parts - 4000 - Tappet Set - Twin Cam/M8FeaturesPerformance hydraulic roller lifters dyno developed and track testedCNC-machined and precision groundWhen used with Feuling® oil pump, they will increase critical oil flow to valves, springs,...

Feuling Parts - 4088 - HP+® Pushrods - +0.040" - M8FeaturesMaintain maximum valve lift in your Harley Davidson® XL engineIncreased stiffness and column rigidity maximizing valve-train stability, increasing engine RPM horsepower and torque output3/8" 4130...

Feuling Parts - 4087 - HP+® Pushrods - M8FeaturesFeuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issuesFixed length, 4130...

Feuling Parts - 4091 - Fast Install® PushrodsFeaturesMade from 7/16” diameter 4130 Chromoly steel with the same great design as the regular install Feuling® adjustable pushrods, but feature a slightly shorter tapered tubeCome disassembled, allowing the...

Jims - 5836 - Rocker Arm Shaft and Hardware Kit - M8Features4130 stud and nut kit replaces the stock hardware used to secure the rocker shaftsCompared to a stock “bolt”, these JIMS manufactured studs allow the technician the assembly finesse required...

Feuling Parts - 1461 - Race Series® Camshaft Kit - 538 Series - Chain Drive - M8FeaturesKit includes Reaper® camshaft, Racer Series full travel hydraulic lifters with 0.200" total travel, gasket/o-ring kit that allows installation of Feuling heavy-duty...

Feuling Parts - 1351 - Cam - 538 Series - Reaper® - Chain DriveFeaturesRevs up fast and pulls hard in engines with big bore cylinders, modified cylinder heads, intake,compression and exhaustThe Reaper® 538 grind will shine in 124” and larger cubic inch...

Feuling Parts - 7252 - Camchest Kit - HP+® Series - Reaper 472 - Oil Cooled - M8FeaturesQuieter and smoother engine operationIncreases oil pressure, scavenge volume and engine oil flowEliminates wet sumping, blowby and oily air cleanersHeavy-duty .165”...

Feuling Parts - 1450 - Cam Kit - HP+® - M8FeaturesIncludes camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardwareKit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ .0165" wall...

Feuling Parts - 1350 - Cam - 472 Series - Reaper® - Chain Drive - M8FeaturesGreat all-around camshaft and Feulings go to for 4-1/2" stroke 114" - 117" looking for a little more than our 465 grind and wanting a bolt-inGreat bottom end with substantial...

Feuling Parts - 1349 - Cam - 508 Series - Reaper - Chain Drive - M8FeaturesProduce more power and torque in the riding RPM range, improving throttle response, acceleration and fuel mileageSmooth camshaft lobe ramps are easier on valvetrain components and...

Feuling Parts - 1208 - Retainer Kit - Titanium - +0.050" - M8FeaturesTitanium Valve Spring Retainer Kit for M8 modelsMade in the USASpecsMaterialTitaniumRiding StyleStreetProduct NameRetainer KitValve Seat Height Imperial+ 0.050''Units8...

Feuling Parts - 1110 - Retainer Kit - Titanium - -0.050" - M8FeaturesTitanium Valve Spring Retainer Kit for M8 modelsMade in the USASpecsProduct NameRetainer KitMaterialTitaniumRiding StyleStreetUnits8 PackValve Seat Height Imperial- 0...

Feuling Parts - 1207 - Valve Spring Kit - High Load Beehive with TI Retainers - M8FeaturesMachined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex®...

Feuling Parts - 1215 - Valve Locks - 6.00 mm Triple Groove - M8FeaturesStandard height stock replacement 6.00 mm valve stem triple groove keepersMade in the USAReplacement Part for OEM Number(s): 18100060SpecsStem Diameter Metric6.00...

Feuling Parts - 1080 - Valve Guide Seals - For 6.00 mm Valve Stem - M8FeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem with minimal...

Feuling Parts - 1108 - Valve Spring Kit - Endurance Beehive with TI Retainers - M8 Features Made from premium stress-relieved conical ovate wire Features extremely high-level of fatigue life Uses a much smaller and lighter weight retainer to reduce...

Feuling Parts - 1107 - Valve Spring Kit - Endurance Beehive without TI Retainers - M8FeaturesMade from premium stress-relieved conical ovate wireFeatures extremely high-level of fatigue lifeUses a much smaller and lighter weight retainer to reduce valve...

Feuling Parts - 1121 - Valve Spring Kit - Econo Beehive with Steel Retainers - Twin CamFeaturesMade from premium stress-relieved conical ovate wireFeatures extremely high-level of fatigue lifeUses a much smaller and lighter weight retainer to reduce...

Feuling Parts - 1206 - Valve Locks - Offset 0.050" - Twin CamFeaturesRaises valve spring retainer to gain 0.050" installed height without maching the cylinder head spring setMade in the USAFeuling Racing & DevelopmentSpecsMaterialSteelStem Diameter...

Feuling Parts - 1213 - Valve Locks - 7.00 mm Triple Groove - Twin CamFeaturesRaises valve spring retainer to gain 0.050" installed height without maching the cylinder head spring setMade in the USAFeuling Racing & DevelopmentReplacement Part for OEM...

Feuling Parts - 1076 - Valve Guide Seals - For 7.00 mm Valve Stem - 88"/96"/103" Twin Cam | XLFeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem...

Feuling Parts - 1075 - Valve Guide Seals - For 0.420" Guide - 5/16" Valve Stem - Twin Cam | XLFeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem...

Feuling Parts - 1105 - Beehive Valve SpringsFeaturesMachined from premium-grade hi-tensile chrome silicon single-conical ovate wireShot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high...

Feuling Parts - 1205 - Valve Spring Kit - High Load Beehive® with TI Retainers - Twin Cam | XL | XRFeaturesMade from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™...

Feuling Parts - 1200 - Valve Spring Kit - High Load Beehive® with TI Retainers - Evo/Twin Cam | XL | BuellFeaturesMade from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™...

Feuling Parts - 1100 - Beehive Valve SpringsFeaturesMachined from premium-grade hi-tensile chrome silicon single-conical ovate wireShot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high...

Feuling Parts - 8070 - Cam ChainTensioner Pad - Hydraulic - M8FeaturesInjection molded nylon with PTFE (polytetrafluoroethylene) added to increase wear and friction resistanceIncludes chain tensioner pad and pinWorks with the factory aluminum housing and...

Feuling Parts - 8041 - Camshaft/Sprocket Thrust Washer KitFeaturesFits stock and stock replacement camshafts and conversion camshaft upgrades on '99-'06 engines to the hydraulic chain tensioner systemConversion camshaft use the late '07-'17 style cam...

Feuling Parts - 7196 - Oil Pump with Cam Plate - HP+® - Oil Cooled - M8FeaturesIncrease oil pressure, oil volume, engine oil flow and return oil scavengingQuieter and smoother engine operationEngine temperatures run 15 -25  coolerOil temperatures run...

Feuling Parts - 1348 - Camshaft - 592 Series - Chain Drive - M8FeaturesAggressive camshaft requiring high lift and higher load valvesprings, performance pushrods and liftersHigh flow air cleaner and triple stepped exhaust pipe highly recommendedHeavy...

Feuling Parts - 7197 - Race Series Oil Pump with Plate - Oil Cooled - M8FeaturesIncrease oil pressure, oil volume, engine oil flow and return oil scavengingQuieter and smoother engine operationEngine temperatures run 15 -25  coolerOil temperatures run...

Feuling Parts - 7251 - Camchest Kit - HP+® Series - Reaper 465 - Oil Cooled - M8FeaturesQuieter and smoother engine operationIncreases oil pressure, scavenge volume and engine oil flowEliminates wet sumping, blowby and oily air cleanersHeavy-duty .165”...

Feuling Parts - 1346 - Cam - 521 Series - M8FeaturesAggressive pulling power with a “nasty” sound, the Reaper 521 grind will shine in 114” and larger cubic inch engines with added compression ratioPorted cylinder heads are not required, but will...

Feuling Parts - 8007 - Pressure Relief Kit - M8FeaturesIncreases pressure relief valve pop-off psiKit includes steel plunger valve, compression spring and roll pinSpring alone provides proper spring rate to control pop-off pressure and oil flow in bypass...

Feuling Parts - 7260 - Camchest - Race Series® - Reaper 465 - Oil Cooled - M8FeaturesQuieter and smoother engine operationIncreases oil pressure, scavenge volume and engine oil flowEngine temperatures run 15 -35  coolerOil temperatures run 15 -30 ...

Feuling Parts - 1443 - Cam Kit - HP+® - M8FeaturesIncludes camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardwareKit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ .0165" wall...

Feuling Parts - 1343 - Cam - 465 - M8FeaturesProduces solid bottom-end performance and substantial gains above 2800 RPM compared to the stock camsDirect bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and...