V-Twin - 17-2838 - F-ck Unbreakable Straight Kick Starter Arm Kit Stainless Steel - Fits 1954-1984 FL, 1973-1984 FXDescriptionKit includes a straight solid stainless steel kick starter arm, with a cast F-ck pedal with related hardware.Check exhaust...

V-Twin - 17-2839 - F-ck Unbreakable Offset Kick Starter Arm Kit Stainless Steel w/ Brass Pedal - Fits 1954-1984 FL, 1973-1984 FX, 1957-1979 XLDescriptionF-ck unbreakable kick starter arm kit includes solid stainless steel offset kick starter arm, with a...

V-Twin - 38-1248 - Chrome Crossover Gas Line Kit - Fits 1942-1949 Harley-Davidson FLDescriptionChrome crossover gas line kit includes crossover and feed line with shut off rod seal and brass sealing washers.Replacement items: 40-0776 Crossover Coil Gas...

Corbin Gentry - Replica Brown Leather Army Solo Seat fits '41-'84 FL, '36-'40 EL Models (OEM #3181-41) Replica brown leather solo seat features exposed rivets as on original Army style seats. It accepts stock "T" bar mounting systems. Order mount...

Baker Drivetrain - 39976-65B-BD - Primary Chain Adjuster Shoe - 2-Hole Bracket/Race Grade - '65-'00 Harley-DavidsonFeaturesMachined from billet nylon 6-6, not moldedIncreased service lifeStronger than stockProudly made in the USATested, used and endorsed...

Cometic - C9585 - Pushrod Tube Seal Set Panhead/ Shovelhead Kit Oe#11133-FlhFeaturesAt Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher...

Cometic - C9216 - Pushrod Tube Seal Set Panhead/ Shovelhead KitFeaturesAt Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher level of...

Cometic - C9893 - Base Gasket .020" Panhead/ Shovelhead 2/PkFeaturesAt Cometic Gasket, our goal is to offer the latest in gasket technologyMaterials, manufacturing processes and gasket designs are constantly improving to match the higher level of...

James Gaskets - 17028-48-F - Gasket Motor Panhead W/Foam Base Gaskets Kit 17028-48-FFeaturesGenuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

James Gaskets - 17028-48 - Gasket Motor Panhead Kit 17028-48FeaturesGenuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

James Gaskets - 17034-48-XF - Gasket Top End Panhead Firerin Foam Bse Kit 17034-48-XfFeaturesGenuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

James Gaskets - 17034-48 - Gasket Top End Panhead Kit 17034-48FeaturesGenuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

James Gaskets - 17541-48-DL - Gasket Rocker Cover Panhead Pr 1/8" Rubber Steel 17541-48-DlFeaturesGenuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

James Gaskets - 16770-48-X - Gasket Cyl Head Panhead W/ Firering .045 2/Pk 16770-48-XFeaturesGenuine James Gaskets uses state of the art materials and production methods to make the best gaskets availableMade in the U.S.A.

Kpmi - 20-4257 - Black Diamond Intake Valve Hd Panhead 48-65FeaturesAll KPMI Black Diamond® stainless steel valves are impregnated by a special German process to a depth of .002”, with a surface build up of .0002”. This “Black Diamond®” process improves...

Kpmi - 20-2104 - Exhaust Spigot Hd PanheadFeaturesReplacement exhaust spigot has been designed and machined from 6061-T6 Aluminum extruded tubingThis spigot allows you to rebuild the exhaust attachment point on you classic Panhead engine

Clymer - CM418 - Repair Manual Harley PanheadFeaturesGlobal Trade Item Number: 024185756583Save $$$ by doing the work yourselfMuch cheaper than OEM manualsWritten in an easy to understand formatFitment1955-1964Harley DavidsonFLH Electra Glide

Colony Machine - 7812-12 - Inner Primary Mount Kit Panhead 55-64FeaturesFitment1955-1964Harley DavidsonFLH Electra Glide

Harddrive - 10-136 - Panhead 48-65 D-Rings Chrome Pair Features Global Trade Item Number: 191361127205 Fitment 2012-2014 Harley Davidson FLD Dyna Switchback 1994-2014 Harley Davidson FLHR Road King 1992-2013 Harley...

Harddrive - 14-0523 - Exhaust End Clamps 48-65 Panhead 54MmFeaturesGlobal Trade Item Number: 191361118364Clamp sizes to fit almost all applicationsSturdy for years of useChrome finish

ALL BALLS - 21131004 - Battery Cable Kit - BlackFeaturesIncrease starter performance by reducing voltage losses from undersized cablesManufactured with pure electrolytic grade, 36-gauge copper wire strandsThe 7 over 7 bundling of the copper strands...

ALL BALLS - 21131003 - Battery Cable Kit - ClearFeaturesIncrease starter performance by reducing voltage losses from undersized cablesManufactured with pure electrolytic grade, 36-gauge copper wire strandsThe 7 over 7 bundling of the copper strands...

Chrome 16" sissy bar kit includes a 16" round bar and non-detachable side plates.Bar height is measured from the first bend to top. Fits: XL 1957-1978 Additional Information UOM 1 -...

V-Twin - 50-0429 - 1949-54 FL Rigid Rear FenderDescription2024 New Production rear rigid fender assembly includes a segmented wire loom conduit and features an updated hinge design for the rear tail. Chain panel is ribbed and part of the fender. Assembly...

2023 New Production rigid rear fender with 7/8" wide braces features a two piece spot welded skirt.Fender is fully assembled and riveted together with hinge. Fender may require a slight adjustment on the hinge area and rear portion. All hinged fenders...

2021 New Production rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by clips.Fender comes with a 7/8" wide bracket and does not have a tail lamp hole. Before finishing with...

V-Twin - 50-0366 - 1955-57 FL Rigid Rear FenderDescription2024 New Production replica rigid rear fender has a 3 rib indent on the rear chain relief cut out. Fender is fully assembled and riveted together with hinge. Fender features a raw finish and 7/8"...

Big Twin Spring Fork front fender features a raw finish and is "skirtless" for fitting to offset rockers.The braces are the wide type 3/4". *NOTE: Front fender tip is for Spring Fork fenders only, installation requires hand fitting to shape of fender. We...

2022 New Production Big Twin rigid rear fender features a raw finish and is the "skirtless" type. Fender does not include skirts.The braces are the wide type 3/4" and the rear hinge tail with updated construction is included. Includes a replica rigid...

Steel bobber style rigid rear fender without tail end hinge on the front fender section. Doe not includes 1/2 of the hinge in place of the fender half. Half of the hinge has been removed to show hinge indent.*NOTE: Half of the hinge has been removed and...

Steel bobber style rigid rear fender without tail end hinge on the front fender section. Does not include 1/2 of the hinge in place of the fender half.Fender style has tail piece removed leaving half of the hinge in place, as on original Wild Ones of the...

Raw finish steel bobber style rigid rear fender without tail end hinge on the front fender section.Fender style has tail piece removed leaving half of the hinge in place, as on original Wild Ones of the 1950s would have used. Fender is narrow type with...

Rear rigid fender hing assembly features a raw finish and includes a 2 piece hinge plate and pin.*NOTE: Hinge does not include tail channel stamped in. Fits: EL 1939-1947 W 1939-1952 FL 1949-1957 Additional Information OEM No. 59851-39 UOM 1 -...

Replica dipstick is cadmium plated and includes a blade style cap and a copper washer. Fits: FL 1941-1964 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported 2025 Catalog Pages 740

Spring Fork inline speedster handlebar with chrome finish. Has holes for buttons on both sides and on left under side. Bars will require hand fitting of spirals. Requires 3 switches for assembly.The 3-switch holes are for police or military use where...

White FRP saddlebag set includes left and right side. Set includes tops, latches, keys and brackets for mounting.Order spacer set to fit saddlebags with luggage rack. The process of injection created smooth inside and outside surfaces. All pieces are...

Black saddlebag set includes correct latch assembly, keys and hinge.Set includes zinc plated brackets, which mounts to FLH rear fender strut, V-Twin #50-1072. Fits: FLH 1963-1969 Additional Information UOM 1 -...

Chrome rocker set with zinc stud and bushing kit for Spring fork.Order lock tab separately. Set has raised are where grease fittings are located. Set has exact shape and look for 1940-1948 Big Twins and 1940-1957 Servi-Car. Fits: G 1941-1957 EL...

Rear saddlebag cross mount bracket for fiberglass saddlebags features a zinc finish.*NOTE: Must order hardware separately. Fits: FL 1963-1984 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported

Raw Spring Fork brake stay tab must be welded on Fits: UL 1937-1948 G 1936-1957 WL 1936-1952 EL 1936-1940 FL 1941-1948 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported 2025 Catalog Pages 780