Luggage rack pad clamp set has quick release springs to fit 3 channel stock luggage racks.Order pad kit separately. rack is designed for loads of 10 pounds or less. Fits: EL 1936-1940 FL 1941-1984 Additional Information OEM No...

UL intake manifold only features a cast iron construction with a parkerized finish.Requires use of nuts, seals, spacer and/or insulator which are available separately. Fits: U 1936-1948 Additional Information UOM 1 -...

Intake manifold is original style cast iron and features a parkerized finish for 45" models.This is the 3 bolt type. *NOTE: Must order brass seals and nuts separately. Fits: W 1941-1952 Additional Information UOM 1 -...

Replica clear glass lens for spring fork. Lens features "Cycle Ray" logo. Fits: EL 1936-1940 FL 1941-1948 Additional Information OEM No. 67701-35 UOM 1 - EA Measurements Additional Information Outer Diameter:...

Black Magic Royalite saddlebag set includes latches with built in lock. Original Buco "Black Magic" style in royalite material was developed in the early 1950s by Uni Royal Rubber Co.Original Buco "Black Magic" style saddlebags are made of thick ABS...

Replica white saddlebag set includes latches with built in lock.Set does not include bracket. Fits: FL 1958-1984 Additional Information UOM 1 - SET Measurements Additional Information Thickness: .223" Length: 22" Width:...

Black Magic Royalite saddlebag kit with brackets. Original Buco "Black Magic" style in royalite material was developed in the early 1950s by UniRoyal Rubber co. Kit includes locks , chrome band, lids, inner chain, bottom and front clips.*Note: UPS may...

Replica white bubble saddlebag kit with brackets for swingarm Big Twin models. Kit includes locks, chrome band, lids and inner chain. Fits: FL 1958-1984 Additional Information UOM 1 -...

Zinc plated saddlebag mounts for stock or Bertha saddlebags. Includes both right and left sides.To allow for alignment and adjustment, mount holes are slotted and are 3/4" diameter. The mount holes measure 7-1/4" center to center. For use with stock...

Unit features chrome front leg, inner and outer springs, chrome rear leg with 7/8" neck stem, outside type rockers for a 5/8" axle with studs and bushings, and spring rods with bushings.Top clamp, neck races, and cone nut are not included. 1" tubes on...

Unit includes inner and outer springs, chrome front and rear legs and inside black rockers for a 3/8" axle. For use with internal brake wheel. Includes all studs, bushings and spring rods with bushings.For use with a 7/8" neck. Top clamp, neck races, and...

Unit features chrome front legs, outer springs, rockers and chrome rear leg. For use with rigid frames with 30  rake.Includes inner and outer springs, front and rear legs, offset outside mount rockers to utilize interchangeable wheel with lug bolt...

Unit features front and rear legs with a painted black finish, inner and outer springs, and rockers. For use with rigid frames with 30  rake.Includes offset outside mount rockers to utilize interchangeable wheel with lug bolt type drum, studs and...

Assembly includes front legs, inner and outer springs, outside type rockers for 5/8" axle with studs and bushings, rear leg in black with 7/8" neck stem and spring rods with bushings.Includes front leg, inner and outer springs, outside type rockers for...

Unit features chrome front legs, chrome outer springs, black rockers, and black rear legs.Includes inner and outer springs, front and rear legs, inside style rockers for a 3/8" axle, studs, bushings, and spring rods with bushings. Top clamp, neck races,...

Stock replica Spring Fork assembly accepts all original style components and accessories for a detailed restoration look. The 45 rockers are mounted in board of the fork legs and accepts a 3/8" diameter axle.Assembly includes inner and outer springs,...

Replica jiffy stand leg only features a chrome finish. Fits: WL 1932-1935 WL 1936-1952 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported 2025 Catalog Pages 813

Replica jiffy stand leg only features a parkerized finish. Fits: WL 1932-1935 WL 1936-1952 Additional Information OEM No. 50060-30 UOM 1 - EA Manufacturer V-Twin Origin Imported 2025 Catalog Pages 813

Kickstand bushing featuring a parkerized finish Fits: W 1941-1952 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported

45 W clutch cable hand lever bushing features a parkerized finish. Fits: G 1941-1973 W 1941-1952 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Tech Note Suggested to use with #22-0808 Hard Clutch...

45" hand clutch cable fitting features a parkerized finish.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits: G 1941-1973 W 1941-1952 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Tech...

Zicad plated hand clutch fitting for 45" models.*NOTE: Cable is threaded to fit outer housing of cable. *NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits: W 1941-1952 Additional Information UOM 1 -...

18mm spark/wire plug kit includes 18mm x 7/8 " replica hex Doering #3 spark plugs, wires, books, wrench and a Side Valve parts book, packed in a 5 gallon metal can. Fits: G 1937-1947 W 1930-1952 VL 1930-1936 Additional Information UOM 1...

Feed pump upgrade for cast pump, flat type, as on 80" Side Valve and late G models.Includes rotor with 4 vanes for added oil pressure! Installation will require using muliple gaskets. Each rotor will require the back surface to be sanded down to each...

Backing plate assembly includes a black backing plate, parkerized arm, shoes, springs, parkerized speedometer drive, pivot stud and cam completely assembled. Updated new production.Check speedometer drive fit before final assembly. Order drum and axle...

New Old StocK" army 45 oil cap. Fits: W 1937-1952 Additional Information UOM 1 - EA Manufacturer V-Twin Origin USA 2025 Catalog Pages 816

Headlamp features a black housing with script Guide logo and clear lens. Includes a chrome rim, reflector and factory style riveting. Bulb is 6 volt 25 wattHeadlamp is reproduced under license that is issued by General Motors Restoration, owner of Guide...

Black spring fork assembly is completely assembled with inner springs. Fork has a 7/8" non removable stem.*NOTE: Rocker set not included, must order separately as required. For 45 Solo applications rockers with 3/8" axle holes are mounted on the inside...

Servi clutch arm and cable kit includes narrow clutch arm.Arm is narrow type. Fits: W 1947-1973 G 1947-1973 Additional Information UOM 1 - KIT Manufacturer V-Twin Origin Imported 2025 Catalog Pages 809 Replacement...

Speedometer drive unit has a 2:1 ratio. Unit is for the rear wheel and features a parkerized finish. Kit includes hold down clip, washer, screw and a nylon 8 tooth gear installed.Includes retainer clip, screw and washer. Body of drive is clearanced to...

Cycle Ray lens kit includes lens, springs, gasket, reflector, bulb socket, and nut/washer for mount stud. Fits: EL 1936-1940 FL 1941-1948 Additional Information UOM 1 - KIT Manufacturer V-Twin Origin Imported 2025...

Hand clutch fitting for 45" models.The inside is threaded to accept spiral cable housing. Fits: W 1941-1952 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Tech Note Suggested to use with #36-1994,...

45 clutch arm and cable kit includes the narrow clutch release arm.The inside width of the mount tabs measures 46mm. *NOTE: 23" cable end is 10-32 UNF thread. Fits: W 1941-1952 with use of narrow cast cover G 1941-1973 Additional...

Parkerized clutch cable end with 1/4" x 24 thread for cable assembly Fits: W 1947-1952 G 1947-1973 Additional Information OEM No. 36993-47 UOM 1 - EA Manufacturer V-Twin Origin USA 2025 Catalog Pages 808 Tech...

Spring Fork damper spider washer Fits: UL 1937-1948 G 1936-1957 WL 1936-1952 EL 1936-1940 FL 1941-1948 VL 1930-1936 Additional Information OEM No. 88936-18 UOM 5 - PK Manufacturer V-Twin Origin USA 2025 Catalog...

Fiber washer for the upper damper rod. Fits: UL 1937-1948 G 1936-1957 WL 1936-1952 EL 1936-1940 FL 1941-1948 VL 1930-1936 Additional Information OEM No. 46779-30 UOM 1 - EA Manufacturer V-Twin Origin USA 2025...

Spring Fork damper release spring Fits: UL 1937-1948 G 1936-1957 WL 1936-1952 EL 1936-1940 FL 1941-1948 VL 1930-1936 Additional Information OEM No. 46777-30 UOM 1 - EA Manufacturer V-Twin Origin USA 2025...

Spring Fork damper adjustable washer Fits: UL 1937-1948 G 1936-1957 WL 1936-1952 EL 1936-1940 FL 1941-1948 VL 1930-1936 Additional Information OEM No. 46775-30 UOM 1 - EA Manufacturer V-Twin Origin USA 2025...

Spring Fork damper rod Fits: G 1940-1957 WL 1940-1952 Additional Information OEM No. 46765-40 UOM 1 - EA Manufacturer V-Twin Origin Imported 2025 Catalog Pages 782

Spring Fork damper bracket features parkerized finish. Fits: EL 1946-1948 61" FL 1946-1948 74" UL 1946-1948 74" only Additional Information OEM No. 46760-46 UOM 1 - EA Manufacturer V-Twin Origin USA 2025 Catalog...