Linkert needle and seat assembly features stainless steel needle machined brass seat with hose barbed end. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Sifton Panhead intake manifold kit is precision cast and machined with special seal design, using heavy duty clamps. Fits:FL 1955-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Linkert carburetor throttle shaft kit includes a throttle shaft, nylon bushings, spring and screws. Shaft is for 1-1/4" linkert brass carburetors. Fits:UL 1937-1948WL 1944-1951G 1936-1954GD 1936-1941Additional Information UOM1 - KIT ManufacturerV-Twin ...

Linkert carburetor throttle shaft kit includes a throttle shaft, nylon bushings, spring and screws. Shaft is for 1" linkert brass carburetors. Fits:UL 1937-1948G 1936-1954WL 1937-1942Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

Sifton peak seal set for linkert carburetor intake manifolds, replaces the stock brass sealing rings, with an exact fit for peak performance.Sold as a pair. *NOTE: Clean the threads on the nuts and intake, that the mating surface of the intake is clean...

Intake manifold kit is constructed of cast iron and includes brass seals, nuts, screws, lock washers, and gasket to fit Knucklehead and Panhead models. Kit is shipped unassembled. Manifold is zinc plated.Kit includes insulator gasket kit. The width of...

Standard linkert carburetor throttle disc is for 1-1/4" bore carburetors. Stamped #13 with correct bevel standard size. Fits:UL 1937-1948WL 1929-1952G 1936-1954Additional Information OEM No.27280-24 UOM1 - EA ManufacturerV-Twin OriginUSA 2025...

K model linkert carburetor kit includes float, lever, pin, needle & seat, throttle door & gasket, and a screw set. Fits:K 1952-1956KH 1952-1956Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Kit includes butterfly type Keihin carburetor assembly, stock intake manifold, spacer kit, clamp set and air cleaner mount kit. Fits:XL 1957-1977FL 1966-1977Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items34-1451...

Complete Linkert flat top float bowl assembly is for Overhead Valve models. Assembly includes a natural finish bowl, nitrophyl float, float arm, needle and seat, bowl nut, gaskets and patch. Features the drain screw provision.Kit is assembled and...

Complete float bowl assembly is all set to just bolt on and go. Includes stock type bowl, stainless steel needle, and brass seat. One piece float lever, Nitryl float, float screw set, float pivot pins set, and float bowl cap.Includes nitropyl float and...

Alloy bombsight M74 1-1/2" throat carburetor hardware kit includes a nitrophyl "unsinkable" float. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages708 Replacement Items35-1388 - Linkert Throttle...

Complete Linkert carburetor float boat assembly includes natural cast flat top bowl, float pivot arm with pin and caps, nitrofill foam "black swan" and bowl nut.Kit is assembled and includes all required parts. Customer must install per service manual. ...

M51 Langhorne linkert parts kit only, without the body. Fits:W 1941-1952U 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Bombsight linkert M51 1-1/4" throat carburetor hardware kit includes all parts except body and is for stock rebuilds with low speed fixed jets.WL and WLA must be fitted with aluminum heads. (Higher Compression) Linkert M88 includes fixed hi-speed...

Shut off rod seat is zicad plated with a rotary shut off petcock design.Use with 5/16" fuel line on barbed end. Shut-off rod will not fit with this rod seat. Rod can be used for decoration only. ...

This 1-1/16" linkert carburetor venturi is precision machined to exact tolerances, constructed of aluminum.This venturi is for M2, M5, M21, M41, M51, M52, M55, M58, M64, M65, M84, M88 & M97. Fits:W 1941-1952Additional Information OEM No.27362-30 UOM1 -...

Linkert throttle lever replacement screw and spring kit features a stainless steel finish. Fits:WL 1937-1952FL 1941-1965EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items35-1388 - Linkert Throttle Lever...

Linkert throttle lever replacement screw and spring kit features a zinc finish. Fits:WL 1937-1952FL 1941-1965EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items73-0043 - Fillister Head Screws 10-24 X 5/8"...

M-75 Linkert carburetor main nozzle. Fits:FL 1941-1950Additional Information OEM No.27331-41 UOM1 - EA ManufacturerV-Twin OriginUSA

Linkert Side Valve choke disc kit includes a linkert choke shaft kit, carburetor choke lever and a carburetor choke lever screw. Fits:G 1936-1957U 1936-1948W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement...

Overhead Valve bean pot linkert bowl assembly includes a replica linkert carburetor float lever, nitrophyl linkert carburetor float, linkert carburetor float assembly and a linkert carburetor float lever screw kit.OHV bean pot linkert bowl is fully...

Zinc finish 2 bolt manifold features 2 holes vertical for 2 bolt linkert or Mikuni-OKO with adapter.*NOTE: Will replace the early 3 bolt brass linkert carburetor manifold. Fits:G 1937-1973W 1937-1952Additional Information UOM1 - EA ManufacturerV-Twin ...

Linkert Side Valve choke disc kit includes extended lever for applications to clear a 7" round air cleaner, disc, shaft and screws.For use with 1-1/2" brass Linkert carburetors. ...

Linkert choke shaft 3 piece kit with carburetor mounted choke lever includes screws, disc, and lever. It is stock for M18, M51, civilian M88, civilian M58, civilian M64. Kit will work on any 1", 1-1/4", or 1-1/2" linkert carburetor. Fits:G 1936-1957U...

Linkert choke shaft 3 piece kit includes choke shaft, disc, and detent plate for 1-1/2" carburetors. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages711 Replacement Items35-0489 - Linkert...

Alloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle response. 1-7/8" intake manifold accepts o-rings and clamps.Will accept S&S bolt...

Alloy OKO Panhead 1-7/8" shorty carburetor kit is for models with o-ring type heads for intake manifold. It has a relocated accelerator pump nozzle for increased throttle response. 1-7/8" intake manifold accepts o-rings and clamps.Will accept S&S bolt...

Linkert carburetor main nozzle retainers plugs screws directly into Linkert spigot to secure jet.Main nozzle retaining system was developed to remove bowl off and on during competitions without the nozzle falling out. Sold as a pack of 5. Fits:KR...

XL Keihin carburetor kit. Fits:XL 1957-1977Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Linkert float bowl parts kit includes a float bowl nut with an internal drain hole, stainless steel nozzle spring, nitrophyl "unsinkable" float and matched needle and seat.For use on other parts of the Linkert carburetor, kit also includes bowl hex nut...

MR-3 air jet is for MR-3 Linkert racing carburetor. Fits:KR 1952-1957WR 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #35-1949 MR-3 Linkert Carburetor Assembly.

Bean pot Linkert M74 1-1/2" carburetor hardware kit includes nitrophyl "unsinkable" float.Bean pot bowl shape allows additional fuel, giving access for long open throttle sessions. Larger inner diameter adds 1.45 cubin inches to hold additional fuel...

Linkert carburetor throttle lever features an alloy finish. Fits:WL 1937-1952UL 1937-1948G 1937-1956Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Brass linkert bowl assembly for Side Valve models.Brass float bowl assembly includes all pieces necessary for complete installation. Ready to install, float set to factory dimensions. Fits:G 1935-1957U 1937-1948W 1937-1952Additional Information UOM1 -...

Brass linkert bowl assembly for Overhead Valve models.Brass float bowl assembly includes all pieces necessary for complete installation. Ready to install, float set to factory dimensions. Fits:FL 1941-1965EL 1936-1952Additional Information UOM1 - KIT ...

Fuel filter and needle seat kit includes nickel plated fuel strainer and brass seat with stainless steel needle.The seat fitting is included. *NOTE: Thread on needle seat is 1/8" NPT. Fits:FL 1941-1965W 1941-1952Additional Information UOM1 - KIT ...

Bombsight venturi kit is for 1-1/2" linkert carburetors, which includes a solid brass machined venturi, venturi tool and a main nozzle. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages710 ...

Side Valve float bowl kit includes a brass WR fuel line fitting and bean pot style bowl with the float assembly. Fits:U 1941-1948W 1937-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages710 Replacement...

M74 Linkert carburetor main nozzle is an OE replica that mesures 2" long. Fits:EL 1937-1952UL 1937-1948FL 1941-1965ULH 1938-1941U 1937-1948FLH 1955-1965Additional Information OEM No.27332-50 UOM1 - EA MeasurementsAdditional InformationLength: 2" ...