This top frame part is machined to accept rear tube, center seat post tube and upper and lower gas tank tubes.Brace has threaded holes for the rear fender and battery box. ...

45 WL tool box tab must be welded or brazed on the left side and features a raw steel construction. Fits:WL 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages814

XL raw brake shaft tube for mechanical brakes. Kit includes machined 7.25" tube with brass bushing and shifter cross bushing set installed. Must be welded in place to frame.*NOTE: Locate tube using cross shaft and pedal location in place to get proper...

Panhead frame speedometer hole piece needs to be welded into place for detailed repair and restoration of frames. Fits:FL 1948-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeWeld-on 2025 Catalog Pages639

Steering lock assembly kit includes complete key assembly, key lock, two keys, spring, pin, plunger, frame plug, and neck casting piece for lock. Must be welded in place.Steering lock assembly kit includes complete key assembly to fit 1948-1970 Big Twin...

Beaded windshield is a fixed mount type which comes completely assembled.Includes beaded windshield top and an adjustable lower windshield to fit FL aluminum headlamp cowl assembly. The center bolt to the top of the windshield measures 14". Order...

Top beaded windshield is short style. Fits:FLH 1949-1984Additional Information OEM No.58020-49A UOM1 - EA MeasurementsAdditional InformationHeight: 15"Width: 22-1/2"Thickness: .090" ManufacturerV-Twin OriginImported 2025 Catalog...

Lower clear windshield window is for 1949-1959 Hydraglide. Fits:FL 1949-1959Additional Information OEM No.58027-49 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages776

Replica assembled one piece beaded windshield has a clear top and bottom.It features pointed beaded edge top for Hydraglide fork covers and 7" headlamp. Top replaces all Police style windshields. *NOTE: must order mounting brackets and hardware...

Raw steel set is the 2 transmission braces that attach to the 2 spools that secure the transmission plate.Features #9 forging as original! Fits:FL 1941-1957EL 1936-1947Additional Information OEM No.47664-48 UOM1 - SET ManufacturerV-Twin ...

Raw rigid frame seat post plate set fit rigid frames as the seat post base.Top and bottom set. Sold as a pair. Fits:FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages638

Frame saver mounting kit for gas tanks must be welded to Big Twin stock or custom frames. Casting features provision for damper pin, as required on 1949-1984 Big Twins.*Note: Includes speedometer mount casting that has steering damper pin hole and is...

Kit includes a 5 gallon WR gas tank set with both sides being for gas, a remote oil tank, a Tourist Trophy rear fneder and a 45" sample stock frame which may need hand fitting in some areas.Frame has dings, scratches, dents and imperfection marks from...

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount straps welded on.Accepts Panhead or Shovelhead engine with...

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported ...

Gloss black engine guard features 1-1/2" tubing, and is OE style.*NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits:FL 1948-1957Additional Information ...

Rigid rear fender shell is the front half withouth the tail and features a raw finish. One piece chain relief features 3 ribs indented.Bare fender body without weldments. Fits:FL 1949-1957Additional Information UOM1 - EA ManufacturerV-Twin ...

Rear fender end side strip is for the rear right side. Fits:W 1939-1948UL 1939-1948EL 1939-1940FL 1941-1948Additional Information OEM No.59883-39 UOM1 - EA ManufacturerV-Twin OriginImported

Rear fender front end side strip is sold as a set of two. Fits:W 1939-1948UL 1939-1948EL 1939-1940FL 1941-1948Additional Information OEM No.59881-39 UOM1 - SET ManufacturerV-Twin OriginImported Replacement Items50-1899 - Rear Fender Rear End Side...

Front fender rear end side strip is for the left side. Fits:UL 1940-1948G 1949-1949FL 1940-1948WL 1949-1949Additional Information OEM No.59212-39 UOM1 - EA ManufacturerV-Twin OriginImported

Front fender rear end side strip is for the right side. Fits:UL 1940-1948G 1949-1949FL 1940-1948WL 1949-1949Additional Information OEM No.59209-39 UOM1 - EA ManufacturerV-Twin OriginImported

Front fender front end side strip is sold as a set of two. Fits:UL 1940-1948G 1949-1949FL 1940-1948WL 1949-1949Additional Information OEM No.59205-39 UOM1 - SET ManufacturerV-Twin OriginImported Replacement Items50-1896 - Front Fender Rear End Side...

Rigid right rear fender bracket with chain guard provision features a raw steel construction. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleStock

Rigid left rear fender bracket with chain guard provision features a raw steel construction. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleStock

Rear fender lower reinforcement pad features a raw finish and three holes.The triangle plate is spot welded in place to reinforce mount hole locations. Fits:FL 1941-1957EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Fender brace inner pad set features a raw finish. Pads should be spot welded inside the rear fender under the brace. Fits:FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Fender reinforcement plate features a raw finish and is for use with u-clamps.Includes 4 holes to accept bolt where the u-clamps mount. Fits:FL 1941-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Rigid rear fender hinge includes both halves assembled with a pin in a raw finish. Connects the rear tail to the main body of the fender.Hinge features channel, for tail lamp wires tube and allows use of tail lamp tube to be spot welded ot hing half...

V-Twin - 50-1661 - Panhead Luggage RackDescriptionReplica Panhead luggage rack feature the 3 channel design.Replica luggage rack replaces OEM #53403-52. Requires OEM #53457-52, Panhead luggage rack stud nuts, for installation. The fender must first be...

Rear fender loom tunnel piece features a raw finish. Loom tunnel is short curved and is used to connect hinge loom assembly with loom tube on the fender skirt.For rigid frame fenders. Tail must be welded onto rear fender hinge. Fits:EL 1936-1948FL...

Rear fender wire/loom tube features wire loom. The tube is formed in places as one piece.Protects the tail lamp wires. *NOTE: Must order the hinge assembly separately. Fits:FL 1936-1948EL 1936-1948Additional Information UOM1 - EA ManufacturerV-Twin ...

Raw alignment clips are for hinged rear fenders, to be spot welded on the front portion of the fender.Sold as a pair. *NOTE: Used to align and hold the rear tail flap edges in place. Fits:FLH 1941-1978Additional Information UOM1 - SET ...

Fender kit includes 6" wide front fender shell and bracket.Bracket is black finish, hardware not included. Fender must be drilled before installation *NOTE: We suggest pre-fitting the fender prior to painting or finishing. Bracket for Bobber front fender...

Swingarm rear fender hinge features a raw finish. Hinge includes both halves with pin but without wire loom tail.Hinge halves are produced with correct pin and hinge offset for installing on original and aftermarket. Center to center of the rivet holes...

Fender bracket mounts to the front fork leg at shock mount holes.Bracket for Bobber front fender may be installed on front or rear of front spring fork. We show as mounted on front outside. Fits:FL 1941-1962EL 1936-1940UL 1938-1948Additional...

Tool box kit is for 45 models with two keys included. Kit also features a black tool box, zinc plated bracket and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Tool Box kit is for 45 models with two keys included. Kit also features chrome tool box, zinc plated bracket, and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Black 18" sissy bar is constructed of 10mm outer diameter solid cold rolled steel bar featuring the original poor boy style.Mounts to fender side tabs. *NOTE: Fits custom rigid frames. ...

Black 25" sissy bar is constructed of 10mm outer diameter solid cold rolled steel bar featuring the original poor boy style.Mounts to fender side tabs. *NOTE: Fits custom rigid frames. ...

Front fender trim set features a stainless steel finish.Sold as a 4 piece set. ...