Black auxiliary seat spring kit with chrome springs. Kit includes yoke bar and clamp set.Kit is used with seat T bars for all buddy and police size solo seats. Order spring clip kit and spring hook separately. ...

Rear frame seat spring 4 piece clamp set Fits:WL 1936-1952Additional Information OEM No.52579-41 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages1252

Distributor breaker hold down clamp. Fits:XL 1952-1970WL 1936-1973Additional Information OEM No.32515-66 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages817

Chrome 2-1/8" inner diameter extra wide allen type exhaust clamp setSold in a quantity of 2. Fits:FL 1948-1965Additional Information UOM1 - SET MeasurementsAdditional InformationThickness: 1-1/8" ManufacturerV-Twin OriginImported 2025 Catalog...

Auxiliary seat spring yoke bar features a black oxide finish.Yoke has a simple slight forward bend a few inches down from the top to clear fender when not being used. Fits:W 1941-1952Additional Information OEM No.52565-41 UOM1 - EA ...

Chrome generator mount strap fits 3-brush type generators. Fits:EL 1936-1940FL 1941-1957U 1937-1948Additional Information OEM No.30025-36 UOM1 - EA ManufacturerV-Twin OriginImported Type3-Brush 2025 Catalog Pages694

Chrome exhaust pipe four piece clamp set for single exhaust.Four piece set. The offset angled clamp mounts to the tab on the frame, which is located under the transmission. This will connect the muffler to the frame and position the exhaust system...

Rear zinc crossover header pipe clamp. Fits:FL 1954-1961Additional Information OEM No.65510-54 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages651

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra wide.Sold in a quantity of 2. Fits:XL...

Coil mount and clamp kit is for 74" and 80" Side Valve and Knucklehead models. It includes two U bolts, two U straps, four nuts, and four lock washers.*NOTE: Must order coil mount plate separately. Fits:UL 1937-1948EL 1936-1940FL 1941-1947Additional...

Seat bracket set features a black finish and includes a zinc clip. Fits:G 1951-1973FL 1965-1967FL 1968-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported StyleStock

Chrome exhaust clamp set includes w piece front pipe clamp and muffler end clamp.Order bolt sets, muffler body clamp, header clamps and rear clamp separately. Fits:FL 1941-1957EL 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...

Black oxide buddy seat spring mount right and left set includes clips to secure bolts in place.Right and left set with slots to accept pins on spring ends when in down position. Fits:FL 1965-1967Additional Information OEM No.52577-65AL UOM1 - SET ...

Starter mount bracket features an stainless steel finish and mounts directly under the starter button with 4 screws for starter kits. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Carburetor support with a zinc finish is for use on OKO and S&S "E" carburetors.For Big Twin models, mounts to center case bolt and carburetor to manifold bolt. Fits:FLST 1985-1999FX 1971-1984FL 1948-1984FXST 1985-1999Additional Information UOM1 - EA ...

Parkerized four piece exhaust system clamp kit.The offset angled clamp mounts to the tab on the frame, which is located under the transmission. This will connect the muffler to the frame and position the exhaust system. Order mount bolts separately. ...

Exhaust pipe clamp kit is for two into one single exhaust. Includes a stainless steel muffler inlet clamp, stainless steel 3-1/4" muffler clamp and a parkerized front exhaust clamp set.Sold as a set of four. *NOTE: Must order exhaust and header clamps...

Parkerized exhaust pipe clamp kit is for single exhaust. Kit includes muffler body clamp with reinforcement clip, muffler inlet clamp, and two piece front header pipe clamp set.Order bolt sets separately. Fits:FL 1941-1957EL 1941-1952Additional...

Black left side muffler support. Fits:FL 1958-1984Additional Information OEM No.65318-59B UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages649 Tech NoteThe two front mounting spacer tubes measure 1-1/8" long.

Black right side muffler support is for over under drag pipes. Fits:FL 1958-1984Additional Information OEM No.65318-58A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages649 Tech NoteThe two front mounting spacer tube measures...

Chrome exhaust clamp set is allen type.Sold in a quantity of 2. Fits:FL 1948-1965Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages652

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is standard wide.Sold in a quantity of 2. Additonal parts may...

Stainless steel exhaust clamp uses hex nuts.Sold in a quantity of 2. Fits:FL 1948-1965Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages652

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

Chrome front clamp pipe with angle.Clamp has an inner diameter of 1-3/4". Fits:XL 1958-1978Additional Information OEM No.65514-58 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages661

Heavy cast steel construction top motor mount is unbreakable featuring a chrome finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center. ...

Heavy cast steel construction top motor mount is unbreakable featuring a zinc plated finish.Thread hole is 5/16" x 18 to mount coil or other accessories, and the distance measures 2" center to center. ...

2023 New Prodcution coil mount bracket kit features a black finish. Kit includes bracket, reinforcement plate, bolt set and coil mount hardware.Order mount stud set seperately. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - KIT ...

Front oil tank mount features a black finish.Mount allows the oil tank to fit close to the top frame rails. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm...

Solo seat mount kit for swingarm frame Big Twins.*NOTE: Must order seat separately. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1241 Replacement Items42-0033 - Chrome 3" Seat...

Front oil tank mount features a black finish.Mount allows the oil tank to fit close to the top frame rails. Fits:FL 1958-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0640 Swingarm York Oil Tank...

Left side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Right side oil tank bracket features a zinc plated finish. Fits:FL 1965-1984FXE 1971-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #40-0406 Oil Tank with Side FillSuggested to use with #40-1719 Oil...

Solo seat front mount features a black finish.Requires 4 rivets for installation. Fits:FL 1941-1985Additional Information OEM No.32090-25 UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #37-0498 Truss Head Rivets...

Black oil tank mount base plate to attached wrap around tank to frame post.Rear mount installation for swingarm frame oil tank mount bracket. For use with electric start kit and 4 speed models. ...

Auxiliary buddy spring seat kit includes chrome springs, collars with pins, under seat brackets and brackets for frame mounts with the cross rod.Kit fits 1965-1971 FL, but can also be fit to 1968-1984. Fits:FLH 1965-1968FL 1965-1968Additional Information...

Solo seat mount kit includes the nose bracket, springs, rear brackets and hardware. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock Replacement Items31-1549 - Stainless Steel Solo Seat Nose...

Top starter mount brace for york electric starter kit and features a parkerized finish. Kit includes seat spring cross suport, seat bracket mount and long rear seat mount tab. For 4 speed models.For securing the starter motor drive engagement on the...

Starter motor support bracket for York electric starter kits to mount the 12 volt starter. Manufactured of cast iron and features a zinc plated finish. For 4 speed models.Bolts to the rear of the transmission plate with 4 holes. For use on York electric...

This kit includes the black "T", shock, and adapter clevis. The mini shock seat post replaces the stock post.Seat tee kit includes mini shock which will support a total weight of 650lbs. ...