Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type master cylinder. Order brake line and master cylinder...

Replica kick starter kit features a black removable kick start arm and spring, to fit on shaft. Kit is unassembled.Kit includes natural aluminum kick starter cover with vent. Fits:FL 1954-1969Additional Information UOM1 - KIT ManufacturerV-Twin ...

Rear brake kit includes a polished rear brake backing plate kit, rear brake shoe kit, polished rear mechanical brake backing plate and a zinc plated brake pedal kit. Fits:XL 1957-1972Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

Replica kick starter kit features a black removable kick start arm and spring, to fit on shaft. Kit is assembled.Kit includes natural aluminum kick starter cover with vent. Fits:FL 1954-1969Additional Information UOM1 - KIT ManufacturerV-Twin ...

Chrome heavy duty kit features a smooth thick wall kick starter cover and heavy duty forged "thick" beefy kick starter arm. Kit is as shown, unassembled.Requires the use of a wafer type release bearing kit. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL...

Chrome rocker style foot clutch assembly is for models with a ratchet top.Includes foot clutch rod lever with offset, rocker pedal assembly, pull rod and clutch arm. For aluminum primary application, 4 speed models, use order the following separately:...

V-Twin - 22-0832 - Daniel Boone 1941-57 Brake Kit for Right Side OnlyDescriptionDaniel Boone mechanical brake kit for right side only with mechanical brake cross shaft on a rigid frame. Features a chrome finish. Kit includes rubber pedal for brake and...

Daniel Boone chrome shifter pedal without rod for left side mounting. Accepts stock kickstand assembly. For 4 or 5 speed application.NOTE: Rod not included, order separately. Fits:FXST 1984-1999FLST 1984-1999FX 1971-1984FL 1941-1984Additional Information...

Chrome rear brake pedal linkage kit includes rod with nut, chrome pedal, rear arm, brake spring, cross shaft, clevis pin, and hardware.Includes a short type brake rod. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to...

45" WL hand clutch assembly as used on Canadian military Harley 45's in World War II. Fits:G 1947-1952WL 1947-1951GE 1947-1952GA 1947-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages808 Replacement...

Replica shifter control kit includes a black bracket, cadmium rod assembly, zinc inner arm, chrome cover and shift lever.Both inner shifter lever and foot shifter lever are un-splined, as original! Fits:FL 1952-1969Additional Information UOM1 - KIT ...

Hydraulic brake control kit with all zinc plated components.Requires footboard mount kit to install footboards on forward brake kits. Fits:FL 1958-1969Additional Information UOM1 - KIT FinishZinc ManufacturerV-Twin MaterialSteel OriginImported 2025...

Chrome brake backing plate kit includes cable end, shackle adjuster, cable, backing plate, brake shoes, springs, lugs, chrome finned brake drum, arm, cam, pivot stud and grease seal Fits:UL 1936-1948EL 1936-1940FL 1941-1948Additional Information UOM1 -...

Spring Fork brake kit fits 1936-1948 Big Twins. Features finned brake drum. Brake drum, backing plate and anchor arm all have a black finish, other parts are parkerized. Fits:UL 1936-1948EL 1936-1940FL 1941-1948Additional Information UOM1 - KIT ...

Dual cam brake blacking plate and brake drum kit is for Spring Fork assemblies with outside rockers features components. supplied in both black and parkerized finishes.Kit includes completed 2 - cam front backing plate assembly with shoes, assembled,...

XL rear mechanical type brake assembly. Kit includes a rear brake kit, cadmium rear chain adjuster, black rear brake drum and a cadmium rear brake drum bolt kit.The frame must have the cross shaft tube for installation. ...

Hydraulic brake control kit features all zinc plated components, except the spring which is black.Requires footboard mount kit to install footboards on forward brake kits. Fits:FL 1958-1969Additional Information UOM1 - KIT FinishZinc ...

Kit features a black finish and includes a plate, springs, replica shoes, cam and pivot stud.Kit includes #23-1750 cast replica brake shoes with riveted linings. Some sanding may be required for exact fit. Order arm separately. **NOTE: On 1936-1957 Big...

Kit features a chrome finish and includes a plate, springs, replica shoes, cam and pivot stud.Includes #23-1750 cast replica brake shoes with riveted linings installed. Some sanding may be required for exact fit. Order arm separately. **NOTE: On...

Dual cam brake kit includes the back plate, lugs and wrench, cable handle and an axle assembly in a chrome finish. Fits:G 1941-1957EL 1936-1948FL 1941-1948Additional Information UOM1 - KIT FinishChrome LocationFront ManufacturerV-Twin OriginImported...

Spring Fork front brake kit features black and parkerized finish components. Includes finned brake drum, an early brake stay bar, and 1938-40 style backing plate. Fits:EL 1938-1948UL 1938-1948Additional Information UOM1 - KIT FinishParkerized ...

Mechanical rear brake kit includes all components in a parkerized finish, except the brake pedal and backing plate.*NOTE: Must order pedal and mount plate separately. On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:FL...

Chrome tank hand shifter kit for ratchet top transmission features smooth gate, handle, rod, pivot bolt, and hardware for 3.5 gallon tanks.The smooth gate allows you to use a ratchet, rotary, or 5-speed transmission. The smooth gate is straight through...

Includes bracket with bushings installed, pedal, spring cover, rod and all friction components.The clutch pull rod connects to the arm on the pivot shaft. This provides an offset to use with an aluminum inner primary cover. Order pull rod end and bolt...

Daniel Boone forward control set features a chrome finish. Set includes right and left sides. For use with rigid frame models with mechanical cross shaft to operate brakes and a 4 speed ratchet top transmission.Requires cross shaft and mechanical brakes,...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models.Accepts Kelsey Hayes type master cylinder, not included. Mounts to...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and master cylinder seperately. ...

Police style jockey shift kit clamps to all front down 1-1/8" tubes for 4-speed ratchet type. Kit includes a smooth gate without detents for shifting.This is an offset handle for use with 5 gallon bobbed tanks. Shift lever assembly and shift rod feature...

Police style jockey shift kit clamps to all Big Twin 1-1/8" front down tubes and is for 4-speed transmission with handshift top. Kit includes a gate with detents. The handle is offset for 5 gallon bobbed tanks. Fits:FX 1971-1979FL 1941-1979Additional...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamoed brake shoes with fitted linings. Fits:VL 1937-1948EL...

Parkerized brake control kit for use with mechanical brake frames with a cross shaft tube only. Footboards may be used with this kit.On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. ...

Chrome brake control kit for mechanical brake frames with a cross shaft tube only. Footboards may be used with this kit.Must order the clutch cable separately. NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. ...

Chrome jockey shifter control kit is ratchet and pedal type with a slap stick style.Kit includes chrome jockey pedal and plate, a foot clutch lever rod, lever rod end, jockey shifter lever with a 3/8" x 24 thread. Will not work with floorboards. ...

Mousetrap clutch booster assembly kit for 1952-1967 Big Twin modelsFor use with tin inner primary models only; 1936-1952 EL and 1941-1964 FL. Clutch release arm is available separately. *Note: UPS may consider this part as packaged "oversize" for...

Chrome forward control kit features left side brake and right side shift for models with mechanical brakes.The splines on the shifter lever are coarse. Order longer motor mount bolts separately. Fits:XLH 1957-1974XLCH 1957-1974Additional Information ...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models and chrome Kelsey Hayes type master cylinder.Mounts to frame with 3/8 x...

Rigid forward brake pedal kit components are chrome and features the FXST style position.Includes pedal, plate, short rod, footpeg, and cross shaft arm. ...

Parkerized brake control kit for use with mechanical brake frames with a cross shaft tube only. Includes a parkerized stop lamp switch.*NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:UL 1936-1948EL 1936-1940FL...

Lee style jockey pedal assembly features a chrome plate and pedal, black OE frame bracket and parkerized mount bolt kit.The bracket is for mounting to the frame. *NOTE: Must order clutch pull rod separately. Fits:FX 1971-1984FL 1941-1984EL 1936-1952U...