Battery box wing nut, 1/4 X 20 thread Fits:G 1932-1963WL 1937-1952DL 1929-1931WL 1932-1936Additional Information OEM No.66387-24 UOM10 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages814

Crank pin nut set.Sold as a pair. Fits:UL 1937-1948EL 1936-1952Additional Information OEM No.23966-54A UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages485

Transmission mainshaft bearing nut kit includes the lock tab. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.35046-36 UOM1 - EA ManufacturerV-Twin OriginImported

Clutch adjusting screw nut. Fits:WL 1941-1973G 1941-1973FX 1971-1984FL 1941-1984Additional Information OEM No.37361-41 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages547

Engine case 1/4" welch plug for early cases.Welch plug is used to seal passages created for internal oiling, on oil pump body and engine case. The welch plug expands for a permanent seal when hit with dull punch, plugs are not reusable. Check the outer...

Cam chest circuit breaker drive gear. Fits:UL 1937-1948WL 1937-1952G 1937-1973Additional Information OEM No.25851-37 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages798

Standard clutch hub bearing roller set. Fits:FX 1971-1984UL 1941-1948FL 1941-1984Additional Information OEM No.9540A UOM20 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages547

Pinion gear shaft key is gear side, semi-circle style. Fits:FXR 1982-1990FLST 1986-1990FXST 1984-1990FX 1971-1984FL 1954-1984FLT 1979-1990Additional Information OEM No.23985-54 UOM10 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages157

Tappet oil screen kit includes screen, housing body, ball, spring, washer and chrome plug. Fits:FL 1952-1962Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages494 Replacement Items12-0161 - Clutch Hub 7/32" Ball...

Steel pushrod ball bearing 3/16".Sold as a pack of 50. Fits:FL 1948-1952Additional Information OEM No.8854 UOM50 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages495

7/32" clutch hub replacement ball bearing.Sold as a pack of 50. Fits:FL 1941-1954UL 1941-1948Additional Information OEM No.8856 UOM50 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages495

Transmission ball bearing is 1/2" and is used for shifter cam plunger.Sold as a pack of 50. Fits:G 1941-1976Additional Information OEM No.8872 UOM50 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages495

OE style Panhead lifter base and tappet kit includes alloy lifter bases, solid lifers and hydraulic pushrods.Includes 2 aluminum lifter blocks and 4 solid stock tappets with adjusters and solid pushrod set. Fits:EL 1948-1952FL 1948-1952Additional...

Rowe cast piston ring set is for a 3" bore and is .050 oversize. Features compression rings with a size of 1/16" and 3 piece oil rings with the size of 3/16".Sold as a pair for 2 pistons. Fits:XL 1957-1971Additional Information UOM1 - SET ...

V-Twin - 11-1714 - Panhead M8 Rocker Box Cover SetDescriptionPanhead rocker box cover set features a cast alloy finish and replaces stock covers. For use on M8 models.Check clearance on models with stock gas tanks and frame spacing to engine. Sold as set...

V-Twin - 11-1713 - Rear Panhead CylinderDescriptionRear Panhead cylinder does not come with the piston.*NOTE: Oil feeds rockers from inside cylinder - use correct base gaskets to seal drain oil passage. Fits:FLH 1955-1962Additional Information UOM1 - EA...

V-Twin - 11-1711 - Front Panhead CylinderDescriptionFront Panhead cylinder does not come with the piston.*NOTE: Oil feeds rockers from inside cylinder - use correct base gaskets to seal drain oil passage. Fits:FLH 1955-1962Additional Information UOM1 -...

Panhead cylinder kit includes 74" cylinders fitted with standard cast pistons (8.5:1) and hastings standard FLH ring set.*NOTE: Oil feeds rockers from inside cylinder - use correct base gaskets to seal drain oil passage. Fits:FL 1955-1962Additional...

Panhead tappet kit includes alloy lifter bases, solid lifters and hydraulic pushrods. Fits:EL 1948-1952FL 1948-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages503 Replacement Items10-0935 - Standard Solid...

Full finned Panhead rocker box cover set features a polished finish.Full finned Panhead valve covers are manufactured from a billet of aluminum and forged to shape the shot peened for a natural finish, providing a more dense surface and grain structure...

V-Twin - 11-1345 - Panhead Pushrod SetDescription4 piece original steel type Panhead pushrod set features built in hydraulic dampers.Set is steel with built in hydraulic unit as the original! For use with solid lifters only. Pushrods include the rod (OEM...

V-Twin - 11-1293 - 74 inch Panhead Cylinder SetDescriptionReplica set includes the front and rear cylinders with OE style casting number code.The cylinders are bored and honed to 3.438" inner dimaeter. Bore size is 3.4380" - 3.4385". ...

V-Twin - 11-1284 - 74 inch Panhead Rear CylinderDescriptionReplica rear cylinder has an OE style casting number code.Cylinder is bored and honed to 3.438" inner diameter. Bore size is 3.4380"-3.4385" *NOTE: All cast iron cylinders have same piston to...

V-Twin - 11-1283 - 74 inch Panhead Front CylinderDescriptionReplica front cylinder has an OE style casting number code.Cylinder is bored and honed to 3.438" inner diameter. Bore size is 3.4380" - 3.4385". ...

Solid tappet screw set includes 4 screws with lock nut. Set is for solid puhsrods on Panhead, Knucklehead and Sportser. Fits:EL 1936-1940EL 1941-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

V-Twin - 11-0885 - Replica 74 inch Panhead Cylinder Piston KitDescriptionThis 74" Panhead cylinder and piston kit is bored and honed to 87.325mm with a stock compression of 8.5:1. Cylinders have original casting marks as on stock cylinders for this year...

.006 exhaust valve guide, cast iron Fits:FX 1971-1978FL 1948-1978Additional Information UOM1 - EA ManufacturerV-Twin MaterialCast Iron OriginUSA Size.006 2025 Catalog Pages518

.004 exhaust valve guide, cast iron Fits:FX 1971-1978FL 1948-1978Additional Information UOM1 - EA ManufacturerV-Twin MaterialCast Iron OriginUSA Size.004 2025 Catalog Pages518

.008 intake valve guide, cast iron Fits:FX 1971-1984FL 1948-1978Additional Information UOM1 - EA ManufacturerV-Twin MaterialCast Iron OriginUSA Size.008 2025 Catalog Pages518

.006 intake valve guide, cast iron Fits:FX 1971-1984FL 1948-1978Additional Information UOM1 - EA ManufacturerV-Twin MaterialCast Iron OriginUSA Size.006 2025 Catalog Pages518

Exhaust valve, chrome Fits:XL 1958-1985Additional Information OEM No.18080-58A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages851

V-Twin - 11-0503 - 74 inch Panhead Rear CylinderDescriptionRear cylinder fits Panhead 1948-1965 74" models. Cylinders are for stock bore, stock stroke and compression.*NOTE: Machined to inner diameter of 87.25mm, cylinders must be honed to standard size...

V-Twin - 11-0502 - 74 inch Panhead Front CylinderDescriptionFront cylinder fits Panhead 1948-1965 74" models. Cylinders are for stock bore, stock stroke and compression.*NOTE: Machined to inner diameter of 87.25mm, cylinders must be honed to standard...

V-Twin - 10-2008 - Panhead 74 inch Short Block Description 74" short block is shipped fully assembled.Unit features S&S crankcases, Sifton oil and breather assembly, stock stroke flywheel, Timken bearings, stock cam properly installed with a...

V-Twin - 10-1990 - Panhead 80 inch Short Block Description Shipped fully assembled.80" Panhead short block is shipped fully assembled. Unit features S&S crankcase, Sifton oil and breather assembly with overhead oiler, stock stroke flywheel, Timken...

V-Twin - 10-1957 - Panhead Cylinder Head Set with Valves Description Cylinder heads are fully assembled with valves, springs and collars.V-Twin Motor Shop Ready Panheads with valves feature original contour castings with the added detail of the stock...

V-Twin - 10-1875 - Panhead/Shovelhead Motor Case SetDescriptionPanhead/Shovelhead motor case set for flat side models with cast aluminum inner primary cover. Set includes tapered bearing assembly for left side and case race on right side. For standard...

Panhead engine case set includes tapered bearing assembly for left side and case race on right side. Features a front saddle for the 3 brush generator strap.Accepts shovel head OHO line to the heads. Set does not accept cast inner cover for 1965-1969 FL...

V-Twin - 10-1820 - Panhead/Shovelhead Engine Case SetDescriptionPanhead engine case set includes tapered bearing assembly for left side and case race on right side. Features a front saddle for the 3 brush generator strap.Accepts shovel head OHO line to...

Set of 3 steel cages, fitted with standard size Torrington rollers for connecting rods. Cages feature copper plating. Fits:UL 1937-1948FXR 1982-1986FLT 1979-1986FXST 1984-1986FX 1971-1984EL 1936-1940FL 1941-1984FLST 1986-1986Additional Information OEM...