Raw steel 45 W rear fender brace set includes chain guard mount tab and stock mount tabs that are used to bolt to frame.The straps measure 7/8" wide. The fender hoop brace is riveted to the factory mount tabs. Fits:WL 1941-1952Additional Information ...

Rigid hardtail frame raw steel rear section is 1957 style replica construction with components featuring the factory details of the period.The rear transmission mounts are 2" from the bottom cross beam to the top of the plate. May be used to repair...

Casting top seat mount is for frame seat post, frame back bone and frame upper seat rail yoke, constructed of forged raw steel. Bushing and grease fitting not included.Features factory cast numbers and forged logo on the underside. ...

Replica rear hardtail frame section is duplicated from an original rigid frame of 1957. Left axle plates are forged steel as OE. Weld-on type. The axle slots are 7/8" on both sides.Full replica construction of the rear frame section includes forged rear...

Chrome finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications.Lowers bike 1/2" and lengthens wheel base 1/2". Axle lowering plates take...

Oil tank bracket kit adds accurately formed stamping for use for restoration of original tanks.This is a 3 piece kit. *NOTE: Must be welded on. Fits:UL 1938-1947EL 1936-1940FL 1941-1964Additional Information UOM1 - KIT ManufacturerV-Twin ...

Engine bar features 1" tubing for Side Valve models.The width of 10-7/8" between the lower mount tabs. Fits:WL 1937-1952G 1929-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Replica rear axle plate set includes detailed numbers forged in, and features a raw finish. Exact for detailed restoration!Custom application for weld and bolt on hardtails. Include correct hallmark late codes forged in place! ...

This raw steel full rear section hardtail for Sportsters includes the rear motor mount and 4 bolt plate mount with upper and lower tube set. Frame is used to replace the stock rear motor mount and seat tube.The rear motor mount 4-bolt plate is welded in...

Neck frame with hallmarks forged in place. Machined to accept neck lock tumbler.Milwaukee forged neck is accomplished in 4 stages: First the steel is fired as red hot ingot, next huge hammers compact and orient the grain structure into a rough shape of...

Lower frame brace tube is for under the main tank tube.1" diameter must be welded in place. Fits:FL 1948-1957EL 1938-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages638

Rigid brake cross shaft kit includes the tube with bushing set and stamped supprt set for the right outer mount.To hold cross shaft, installation requires welding or brazing. Use actual cross shaft for alignment. Fits:FL 1941-1957EL 1936-1952Additional...

Lower frame rail set is constructed of raw steel for rigid frame models.The left side tube has a flat portion for inner primary clearance. Fits:FL 1948-1957EL 1936-1947Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog...

Raw steel front tube set features pre-bent offset right and left tubes for wishbone rigid frame restoration.The right and left tubes features indents for the mount horn tabs. Must be cut to final length and welded in place. *NOTE: Must order horn blocks...

Top rear frame rail set is constructed of raw steel and is for use with Panhead models. Set connects to the seat post area to the rear axle plates.Set includes left and right rail that is to be welded or tig welded in place. The outer diameter measures...

Lower frame tube brace set is for use on right and left rigid and straight wishbone frames.Set includes the right and left side, with chain offset. Set features factory style bends for replacement and restoration purposes. Tubes are shipped as raw DOM...

Raw fender cross brace is for use on Panhead rigid frames. Tube measures 1" outer diameter and needs to be welded in place.Kit does not include saddles, it is only the tube. Must be welded in place. Fits:FL 1948-1957Additional Information UOM1 - EA ...

Seat post rigid frame tube is constructed of steel and features a raw finish.Bushings not inclulded. Must be cut to final length and welded in place. *NOTE: Does not include the lower spool insert for rod. Fits:FL 1948-1957EL 1936-1947Additional...

Raw steel front tube set features pre-bent offset right and left tubes for wishbone rigid frame restoration.The right and left tubes are without indents for the mount horn tabs. Must be cut to final length and welded in place. Fits:FL 1948-1954Additional...

Lower tank mount tab set features a raw finish.Right and left side must be welded in place. Fits:FL 1948-1954Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages638

Lower frame gas tank mount set is without cross bracket. It includes the right and left tabs. Tabs are constructed of st eel and have a raw finish.May require finishing prior top installation and must be welded on. Fits:FL 1955-1984Additional Information...

Front engine bar spacer will fit wishbone frames. Fits:FL 1948-1953Additional Information OEM No.49059-48 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages622

This 5th Mount transmission frame repair tab is weld on style for stock frames. The tab is constructed of steel and has a raw finish.May require finishing prior to installing. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ...

Front cable weld on frame bracket Fits:FL 1948-1954Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeRigid 2025 Catalog Pages638

Wishbone side Car weld on frame loop set includes right and left side, featuring a raw finish. Fits:FL 1948-1954EL 1948-1954Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages639

Frame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount. Weld in place for accurate restoration. Fits:FL 1948-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA TypeRigid 2025 Catalog...

Rear pipe frame tab. Fits: FL 1958-1984 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Type Rigid 2025 Catalog Pages 639

Brake line tee tab. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeRigid

Cable mount frame tab is for under tank. Fits:FL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages639

This original style frame mechanical brake shaft crossover tube includes one bushing, and grease fitting. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 6-1/4" ...

Upper shock frame mounts are weld on style for stock frames.Sold as a set of two. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeSwing Arm

Upper shock frame mounts are weld on style for stock frames.The top shock mount forgings to fit 1958-64 FL, or to convert the 1965-84 frame to the lower seat area configuration, to fit a 6V battery only, as original! Sold as a set of two. ...

Casting top seat mount is for frame seat post, frame back bone and frame upper seat rail yoke. Fits:FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Lower tank frame mount with cross plate.Must be welded in place. The mount hole center to center measures 1-3/4" and the small end grasp area sits 1-1/2" high from the plate. Fits:FL 1948-1954Additional Information UOM3 - SET MeasurementsAdditional...

Frame mount tab set for solo seats have weld on mount tabs. Use with T bar and pivot bolt to mount K and CH solos. Fits:XL 1957-1979Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages822 Tech NoteSuggested...

Rigid Big Twin crossover shaft frame brace comes in left and right. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid

This weld on style coil mount frame block set repairs stock frames and has a 3/8"-24 UNF thread. Fits:FL 1956-1983FX 1971-1983Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid

Frame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount. Weld in place for accurate restoration.*NOTE: Threaded for seat "T" bolt. Fits:FL 1953-1969Additional Information UOM1 - SET ManufacturerV-Twin ...

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL 1938-1940Additional Information UOM1 - EA ManufacturerV-Twin ...

Rear frame engine mount and front transmission mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638