Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear hole. *NOTE: Drill out 1/4" holes where original...

V-Fire electronic ignition system includes rotor and pickup sensor.Ignition system mounts on 6-volt stock point type distributors. When installed, distributor assembly retains stock look for restoration projects. Fits:FL 1948-1969Additional Information ...

Zinc plated Shovelhead clamp for mounting distributor in 1936-52 EL and 1941-64 FL models. This is a 2 mount hole at base only.For use with v-fire Big Twin Overhead Valve auto advance distributors *NOTE: Outer one used 1/4" x 20" or 1/4"-24, check thread...

Stainless steel base ignition advance unit without cam is heat treated weights for 1970-up mechanical advance ignitions.Ignition Circuit Breaker Cam OEM #32542-70A and bolt or washers are not included, must order separately. Fits:FX 1971-1978FL...

Electronic ignition conversion kit. Fits:FL 1948-1969Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items32-2534 - V-Fire Electronic Ignition32-1337 - Distributor Wire Loom Clips (10pc)

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS 1975-1980FL 1975-1981FXD 1991-1994FXR 1984-1994FLST...

V-Twin - 32-2045 - 1965-1984 FL Electric Starter Kit Description Electric starter kit mounts to existing alloy cast inner to accept a high torque 12 volt starter. Motor includes the integral Bendix drive on shaft. The drive utilizes existing clutch...

Magneto advance arm with magnet.The magnet is used to hold the arm in position by adhering to the points cover screw. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Magneto advance post for advance arm kit. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Burkhardt offset Big Twin magneto base assembly includes the shaft, shaft drive spiral gear and (2) drive gears.For magneto installation. Assembly fits stock Big Twin cases. Fits:FL 1941-1969Additional Information UOM1 - KIT ManufacturerV-Twin ...

Weed wacker coil for Dave Hale. Fits:XL 1970-1980Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Main dash coil wiring harness assembly runs from the dash panel to the OEM type terminal box mounted behind the coil or dual point coils.*NOTE: Made from 16 gauge cotton braided over vinyl wire with machine crimped and insulated #6 of the red and green...

Burkhardt Magneto rotor assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Burkhardt Magneto lower drive assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages679 Replacement Items32-2094 - Magneto Inner Stud Mount Set12-0986 - Clutch Retaining Ring

Magneto gear kit. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-0971, Magneto Drive Assembly

XLCH Magneto advance assembly includes all necessary pieces to have a cable operated advance on XL-WL magnetos. Fits:XL 1957-1970Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1303 Replacement Items32-1348 -...

Magneto rotor with shaft. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-0971, Magneto Drive Assembly

Horn and dimmer switch set is an accurate replica. Switches include cloth covered wires as the original. The dimmer switch is 3 wire and the horn button is 1 wire. Both switches is developed with new 2020 tooling technology. Fits: FL 1941-1972 J...

XLH battery cable set for electric start models.Sold as a set of 3, which includes one 8-1/2" braided flat unsheathed battery cable and two 15-1/2" black positive battery cables. Fits:XLH 1967-1978Additional Information UOM1 - SET ManufacturerV-Twin ...

Left hand magneto points base plate.Left hand rotation is opposite of the standard Harley rotation. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1303

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH Panhead, clockwise when viewing points cam rotation (only)...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages964 Replacement Items37-0179 - 1/4"-20 x 5/8" Flathead Screw...

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes, with heat shielded terminal ends. PVC plastic coated...

XR/XL/WR magneto drive assembly includes gears and related mount plates, for 45" motors when installing a front mount magneto in place of the generator.2 idler gear spindles are supplied, the XR magneto idler gear stud raw is how an XR is done. The 45"...

Magneto rotor includes integral tapered shaft.. Fits:XR 1970-1979WR 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #32-1256 WR Magneto Drive.

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages678 Replacement Items37-0153 - Allen Flat Head Screws Chrome 1/4"...

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog...

V-Fire point set is the exact replacement for the years listed.Sold in a pack of 5. Fits:FL 1970-1978XL 1971-1978Additional Information OEM No.32661-70 UOM1 - SET ManufacturerV-Twin OriginImported

Kit includes a 2 brush generator gear, 2 brush generator oil deflector and washer. Fits:G 1958-1973Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages695 Replacement Items32-1363 - 2-Brush Generator Gear32-0217 -...

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to...

Early 3 way key switch features a die cast body with the off/on/on positions, and includes 2 small early style brass Chicago style brass keys, for XLCH applications.Threaded body has a 3/4" outer diameter. Fits:XLCH 1959-1972Additional Information OEM...

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encased in a stainless steel shell...

Chrome alternator bolts on in place of original 12 volt generator. Includes chrome solid state regulator, gear, gasket and mount screw set.Features high power output, 17 amps @ 1000 rpm. *NOTE: On 1941-57 models, generator screw holes must be enlarged to...

Chrome alternator bolts on in place of original 12 volt generator. Chrome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encased in a stainless steel shell...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encased in a stainless steel...

Black alternator bolts on in place of an original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encased in a stainless steel...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single fire ignition systems. Fits:FXST 1984-1999FL 1970-1984FLT...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages355 Replacement Items32-7571 - Solenoid...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at the same time. Fits:FXST 1984-1999FL 1970-1984FLT...

XLH battery cable set includes a black positive/negetive 15-1/2" cable and a braided flat negative 9-1/2" cable.Sold as a set of 2. Fits:XLH 1967-1978Additional Information UOM1 - SET ManufacturerV-Twin OriginImported Replacement Items32-0310 - Black...