Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel injection; a large gauge assembly, 8" hose, 2" hose, fuel tank...

Jims - 756 O2 Sensor Wrench fits '12-'17 Softail Models Features: Removes and installs O² sensors without removing exhaust pipes Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 5831 Socket Fork Castle Nut fits '18-'20 FLSB/​FXFB Models Features: Socket adapts wrench to remove castle nuts and access shock cylinder Made in USA Fitment 2019 Harley-Davidson FXDR...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...

Jims - 33096-54B Kickstarter Shaft fits '36-'86 Big Twin Models Features: Precision-machined replacement shaft Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special FLHX - - 1983-1985 Harley-Davidson Low Rider...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end...

Jims - 1022 Blue Motor Stand fits '99-'17 Twin Cam “A” Motor Features: Makes working on motors easier with better access Made in the USA Note: For Twin Cam "A" motor

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 1006T Black Motor Stand fits '84-'99 Evolution Motor & 74”/80” Big Twin, 45” Engine Repair Features: Makes working on motors easier with better access Made in the USA

Jims - 33428-78 Main Drive Gear Bearing Tool fits '79-'84 4-Speed Big Twin Models Features: Use to install the main bearing (Harley-Davidson® #8905) to the correct depth Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of injury Made in the U.S.A...

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels Use with JIMS® Handle Fitment 1999 Harley-Davidson Super...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Jims - 96385-78A 4-Speed Shift Fork Gauge fits '79-'85 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Jims - 96384-39 Shift Fork Gauge fits '39-'78 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A. Fitment 1978 Harley-Davidson Electra Glide...

Jims - 96780-58A Piston Pin Lock Ring Tool fits Pre-'73 Big Twin & Sportster Models w/ 0.515” ID Wrist Pins Features: Use to install lock ring (Harley-Davidson® No. 22582-52) in piston having .515” inner diameter wrist pins, like...

Jims - 1051 Wrist Pin Bushing Tool fits '99-'06 Twin Cam Models Features: Used to remove and install wrist pin bushings without removing connecting rods from crankcases Comes with instructions Made in the U.S.A...

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams Also checks spring loads on chain...

LA Choppers - Pinned Hefty Top Clamp fits '99-'23 Big Twin Models w/ 3-1/2 ” on Center Risers & Offset Mounting Holes Features: Fits Hefty handlebars and risers Polished aluminum construction Pinned to prevent movement of handlebars Made...

Custom Cycle Engineering - 49 mm Hard Chrome Standard 25.875" Fork Tubes fits '18-'23 FLFB/​FLFBS Models Features: Finish is electrolyzed for increased hardness of 55-60 Rockwell Increased hardness for better long-lasting corrosion...

Custom Cycle Engineering - 49 mm Ultra Chrome Fork Tubes fits '18-'23 FLFB/FLFBS Models (OEM #455004-60) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...

Custom Cycle Engineering - Radial Brake Caliper Brackets fits '18-'23 FXFB/​FXFBS/​FXLRS/​FXLRST Models Features: One piece brackets for fitment to radial mount calipers for 43 mm fork tubes Has increased feedback and better caliper to disc...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97, 45930-00) Features: Designed to fit a wide variety of models Made in...

Custom Cycle Engineering - 35 mm Ultra Chrome Showa Fork Tubes fits '84-'86 FXRS, '86 FXR, '85 FXSB/FXE/F, '76-'83 FX/​FXR, '75-'83 Sportster Models (OEM #45407-73, 45644-77) Features: Designed to fit a wide variety of models Made in the U.S...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire applications and are...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide - 18''/ Chrome These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide - 12''/ Gloss Black These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire...

Biltwell - Tyson XL Pullback 14" Handlebars- Chrome/ Slotted These T-style handlebars are a clean look on FXR's, Dynas, Sportsters, and Choppers. Features Manufactured from 1" OD x .120" wall seamless 4130 chromoly tubing All bends are created with...

Uni Filter - Air Filter Element fits '86-'89 80” Evolution Big Twin Models (OEM #29259-86) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration Made in the...

Uni Filter - Air Filter Element fits '84-'85 80” Evolution Big Twin Models (Except FLT, FLHT (OEM #29259-83A)) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior...

Uni Filter - Air Filter fits '80-'82 FLT, '82-'83 FXR, 'L78-'82 Sportster 1000, 'L78-'84 FX, FL & FLH Models (OEM #29255-78) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing...