Top motor mount 4-piece kit includes upper horn and choke bracket zinc, chrome upper front motor mount, and chrome cross bracket cylinder head. Fits:XL 1977-1981Additional Information OEM No.69129-72 UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Top motor mount chrome 2 piece set for 1957-1976 XL Fits:XL 1957-1976Additional Information OEM No.16250-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Top motor mount chrome accepts molded coil and is not equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Top motor mount chrome accepts molded coil and is equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Cast rear replacement is a two bolt style motor mount. Fits:XL 1967-1981Additional Information OEM No.16203-67 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages946

Electric starter motor clamp with stainless steel finish. Fits:XLH 1967-1980Additional Information OEM No.31473-67 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages962

Turn signal bar features a chrome finish. Fits:XL 2004-2022Additional Information OEM No.60215-06 UOM1 - EA ManufacturerV-Twin OriginImported

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs on the seat nose. On 1979-1984 XL models, the bracket...

Black heavy duty top motor mount features a convenient spot to relocate your ignition switch and the option of a CV carburetor choke mounting slot.Includes coil mount. Fits:XL 2004-2018Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

Black heavy duty top motor mount features a convenient spot to relocate your ignition switch and the option of a CV carburetor choke mounting slot.Includes coil mount. Fits:XL 1986-2003 will not work with stock petcock on left side of tankAdditional...

1-3/4" staggered dual pipe exhaust system includes 38" long tapered mufflers. This exhaust system is for 1979 Sporster without kick start only. Includes slider channels on the mufflers and hanger bracket for installation.One piece seamless design with...

Heat shield set with holes features a chrome finish for XL models. Fits:XL 1986-2003Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Heat shield set with holes features a black finish for XL models. Fits:XL 1986-2003Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

Drag pipes with oxygen sensor port and black slash cut ends feature a chrome finish. These pipes have a 1-3/4" diameter and are 34" long.These pipes may be used on 2004-2006 models if oxygen sensor bungs are capped with a oxygen sensor plug. Pipes mount...

Heat shield set chrome for drag pipes. Fits:XL 1986-2003Additional Information OEM No.67512-86 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages939

Chrome 40" drag pipe set has a diameter of 1-3/4" and features black slash cut tips.Pipe set will not fit kick start models. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products...

Curved radius exhaust header is chrome plated and features a 2" diameter and slash cut ends.*NOTE: Does not have baffles. Fits:XL 1986-2003Additional Information UOM1 - SET FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages933

Chrome goose style drag pipes have a diameter of 1-3/4" and a length of 34". Use with heat shields.Set includes channel mounts. *NOTE: Does not come with heat shields. **CAUTION: These exhaust products are not legal for sale or use in California on...

Chrome drag pipes features a 28" long front pipe and 38" long rear pipe, that will mount with stock brackets.Sold in a quantity of 2. On the front pipe the down part is 15" and the rear to the start of the channel is 9-1/8". On the rear pipe the down to...

Exhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to use (2) matching header clamps available separately. *NOTE: Must order t-bolts...

Front and rear 1-3/4" header pipes are a one piece seamless design, integrating tapered mufflers. Features bolt on installation.Required to use with an exhaust pipe mount bracket and muffler T bolt set. ...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Tapered muffler set is custom seamless type for Ironhead models. Components available separately. Fits:XL 1980-1984Additional Information UOM1 - KIT ...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid frame only.The angled megaphone adds an extra "kick up"...

Black muffler set features a 3" body outer diameter and measures 20" long with tapered revolver tips.Baffles are not removable. The billet end has less of a taper than V-Twin #30-1611 and #30-1616. Sold as a set. ...

Black muffler set features a 3" body outer diameter and measures 20" long with highlighted revolver tips.The billet end has more a taper than V-Twin #30-1614 and #30-1617. Sold in a quanity a set. **CAUTION:...

Chrome muffler set features a 3" body outer diameter and measures 20" long with tapered revolver tips.Billet end has less of a taper than V-Twin #30-1611 and #30-1616. Sold as a set. **CAUTION:...

Chrome muffler set features a 3" body outer diameter and measures 20" long with highlighted revolver tips.The billet end has more taper than V-Twin #30-1614 and #30-1617. Sold in a set. **CAUTION: These...

XL muffler kit includes two seamless mufflers with inlet clamps and chrome support bar. Kit is for use with Ironhead models and 1-3/4" drag pipes that are cut to length to use with header pipe.Header pipe not included. *NOTE: Suggested to use with OEM...

Magnum 1-3/4" exhaust drag pipe set is constructed of steel featuring a flat black finish and includes heat shields.*NOTE: 2004-2006 models will require the seperate purchase of #30-0423, O2 sensor bung plugs. Fits:XL 2004-2013Additional Information ...

Magnum 1-3/4" exhaust drag pipe set is constructed of steel featuring a chrome finish and includes removable heat shields.*NOTE: 2004-2006 models will require seperate purchase of #30-0423, O2 sensor bung plugs. Fits:XL 2004-2013Additional Information ...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Muffler set is seamless custom type for Ironhead models. Include embossed lines on mufflers. Components available seprately. Fits:XLCH 1959-1978XLH 1957-1978Additional...

Chrome heat shield set with holes for drag pipes.Sold in a quantity of 2. Fits:XL 2007-2013Additional Information OEM No.64601-10 UOM2 - SET ManufacturerV-Twin OriginImported

Black heat shield set with holes for drag pipes.Sold in a quantity of 2. Fits:XL 2007-2013Additional Information OEM No.64601-10 UOM1 - SET ManufacturerV-Twin OriginImported

Replica chrome muffler set with slash cut outlet has 2-1/2" body diameter and 1-3/4" inside inlet diameter.**CAUTION: These exhaust products are not legal for sale or use in Californai on pollution controlled vehicles. these products are intended for...

Alphabet Sportster exhaust header set features a raw finish. Set is used for Sportster Ironhead models.Set will fit stock Sportser models, including 1971-1984 models with forward controls and 1975-1984 models with mid controls. Installation may not be...

Alphabet Sportster exhaust header set features a black finish. Set is used for Sportster Ironhead models.Installation may not be compatible with some forward or mid controls. Front and rear header included. *NOTE: Not connected by equalizer tube. *NOTE:...

XL exhaust system includes 38" long tapered muffler set. The muffler sets have slider channels and mount with hanger bracket, which is included in the set, but will not fit on 1979 Sporsters.One piece seamless design with the tapered muffler welded and...

Alphabet Sportster exhaust header set features a chrome finish. Set is used for Sportster Ironhead models.Set will fit stock Sportster models, including 1971-1984 models with forward controls and 1975-1984 models with mid controls. Installation may not...

Black 2:1 alphabet exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.Set will fit stock Sportster models, including 1971-1984 models with forward controls and 1975-1984 models with mid...

Chrome 2:1 exhaust header set includes rear, forward wrap around and radiused front, to fit into 2 into 1 turn out muffler end.*NOTE: Turn out end not included. Fits:XLH 1971-1984 900cc, 100ccXLCH 1971-1984 900cc, 100ccXL 1971-1984 900cc, 100ccAdditional...