Fork tubes are 20-7/8" stock length.Before installing, compare old and new tubes. Be sure the stock top plugs thread into the new fork tubes. Sold as a pair. *NOTE: These are fork tubes only. Internal springs and top cap...

Fork tubes are 24-7/8" and are stock length for FXWG, FXD models. Tubes are 4" over stock for FL models. Stock length for FL models is 20-7/8".Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold...

Fork tubes are 20-7/8" stock total length.Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold as a pair. *NOTE: These are fork tubes only. Order internals separately...

Fork tubes are 24-1/4" stock length.Tube set is stock FXST length but would be an extended length if used on FLST. Set of two. Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. ...

Dura polished brake disc features a rustless finish and long service life. Compatible with all brake pads including sintered metal and OEM.Disc has a center hole inner diameter of 2". For use on front and rear applications. Bolt kit is sold separately...

Clutch master cylinder cover features a chrome finish. Fits:FLT 2008-2013Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages43

Rear remote mount master cylinder is designed to mount in a variety of locations where standard assemblies cannot. Replace OE master cylinder, lines will be in same position. The finish is a natural alloy with shot peen. Fits:FLT 1986-1991Additional...

Chrome brake pedal. Fits:FLST 1986-1999FLT 1997-2008Additional Information OEM No.42407-87B UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages233

Front brake caliper guide pin kit. Fits:FXST 1993-1999 Except FXSTSXL 1993-1999FXD 1993-1999FXR 1993-1994FLST 1993-1999FLT 1993-1999Additional Information OEM No.44053-92 UOM1 - EA LocationFront ManufacturerV-Twin OriginImported StyleAllen 2025...

Alloy rear remote mount master cylinder is designed to mount in a variety of locations where standard assemblies cannot. The bore is 5/8". Fits:FLT 1986-1991Additional Information UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported Tech...

Alloy rear remote mount master cylinder is designed to mount in a variety of locations where standard assemblies cannot. Require external reservior. Fits:FLT 1987-1994Additional Information OEM No.41755-86 UOM1 - EA FinishAlloy ManufacturerV-Twin ...

Caliper is completely assembled with piston and seal.Uses the stock mount brackets for an exact replacement. The holes are 4-1/2" apart center to center. Mount brackets and mounting bracket are sold separately. Fits:FLT 1986-1999Additional Information ...

Assembled with piston and seals.Bracket is not included. Fits:FLT 1986-1999FXR 1987-1999 Late 1987Additional Information OEM No.44076-86A UOM1 - EA FinishBlack LocationRear ManufacturerV-Twin OriginImported 2025 Catalog Pages50

Rear brake master cylinder reservoir features a die-cast aluminum construction with ribbed accents and the sight glass installed in an black finish.Accepts OEM style cover, gasket and mounting hardware. Fits:FXR 1999-2000FLHT 1986-1994FXR 1985-1994FLHR...

Caliper adapter features a cast stainless steel construction with a natural finish. Adapter is used for relocation of the caliper to allow an oversize rotor.For 12-1/2" or 320mm right or left rotor. Fits:FLH 2008-2013FLHRC 2010-2013Additional Information...

Front caliper piston and seal kit is for use on the 6-piston front caliper on 2014-18 Trike models. Includes upgraded billet designed anodized pistons for long life and rubber seals that are compatible with all brake fluids. Fits:FLTRT 2014-2018FLRT...

Kit includes a chrome rear caliper, 10" steel drilled disc, chrome bolts, chrome support bracket, anchor bar with bolts. Fits:FLH 1973-1980FX 1973-1980Additional Information UOM1 - KIT FinishChrome LocationRear ManufacturerV-Twin OriginImported ...

Stainless steel 11.8" rear brake disc requires bolt on application, like the original.Diameter measures to be 11.5" = 292mm. Must order mount bolts separately. Fits: FXD 2000-2017 FXST 2000-2017 FLT 2000-2017 Additional Information UOM 1 - EA ...

Stainless steel 11.8" front brake disc requires bolt on application, like the original.Diameter measures to be 11.8" = 300mm. Must order mount bolts separately. *NOTE: Does not fit 2023 FLHXSE and FLTRXSE. Fits: FLT 2014-2023 Additional Information ...

Alloy rear master cylinder is designed to have 3 fittings with 1/8" NPT. Two for brake lines and one for stop light switch.*NOTE: Made by vibration grinded. Fits:FXWG 1983-1984FXST 1984-1986FXSB 1984-1984FLHS 1983-1984Additional Information OEM No...

Black smooth style front brake caliper set features right side caliper which includes all internal components and pads.Caliper mounts on back of lower leg with the bleeder screws facing out. Use with an 11-1/2" disc. Fits:FLT 1984-1999FXSTS...

Kelsey type alloy master cylinder. Fits:FLH 1979-1984Additional Information OEM No.41754-79A UOM1 - EA FinishAlloy ManufacturerV-Twin OriginImported 2025 Catalog Pages578

Help dampen your rattling pads with this anti vibration kit for the front brake calipers.Use tops and bushings from existing Flanders risers. Fits:FLH 1973-1978FL 1973-1978Additional Information OEM No.41768-73 UOM1 - EA ManufacturerV-Twin OriginUSA ...

Natural assembly with pushrod and dust cover. Fits:FLT 1997-1998Additional Information UOM1 - EA FinishNatural ManufacturerV-Twin OriginImported 2025 Catalog Pages43

Natural assembly with pushrod and dust cover. Fits:FLT 1995-1996Additional Information OEM No.41755-95A UOM1 - EA FinishNatural ManufacturerV-Twin OriginImported 2025 Catalog Pages43

FXRP brake pivot is made of natural aluminum and is for use with footboards. Fits:FXRP 1988-1991FLHT 1980-1985FLT 1980-1985Additional Information OEM No.42535-85A UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteFrom Book #99439-86A - P. 54 -...

Caliper piston and seal kit includes round o-ring, piston and matched seal kit.Sealing ring is the "square profile" type and can be used to fit on front and rear 1980-up banana calipers. Fits:FLH 1981-1984FL 1973-1980Additional Information UOM1 - KIT ...

One piece Touring mechanical brake pedal features a chrome finish. Fits:FLH 2008-2013Additional Information UOM1 - EA FinishChrome ManufacturerV-Twin OriginUSA

Brake pad pins for the front or rear brake pads. Fits:FXD 2008-2017XL 2008-2017FLST 2008-2017FLT 2008-2017FXST 2008-2017Additional Information OEM No.42345-08 UOM1 - KIT ManufacturerV-Twin OriginImported

Chrome oval shape forward pedal will allow full use of the footboard. Without rubber pad. Fits:FLST 1987-1999FLT 1997-2007Additional Information UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages233

Rear section of the brake line fits from the junction toward the rear caliper. Brake line features a chrome finish.Order rubber hose for final connection to the rear wheel cylinder or caliper separately. ...

Billet chrome brake pedal with milled slots. Stock length.Constructed from a one piece forged aluminum blank. Fits:FLT 2008-2013Additional Information OEM No.40091-10 UOM1 - EA MeasurementsAdditional InformationLength: 10.89" FinishChrome ...

Zinc steel front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1979-1984Additional Information UOM1 - EA FinishZinc ManufacturerV-Twin...

Rear remote mount master cylinder are designed to mount in a variety of locations where standard assemblies cannot. Fits:FLT 1995-1996Additional Information UOM1 - EA FinishBlack ManufacturerV-Twin OriginUSA

Chrome cover for the rear master cylinder reservoir.Includes gasket. Screws sold separately. Fits:FXST 2000-2005FLT 1999-2004FLST 2000-2005Additional Information OEM No.45149-99C UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages43 ...

Rear section of the brake line fits from the junction toward the rear caliperOrder rubber hose for final connection to the rear wheel cylinder or caliper separately. *NOTE: Brake line will...

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order rubber hose for final connection to the rear wheel cylinder or caliper assembly. *NOTE:...

Zinc steel front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1970-1978Additional Information OEM No.42304-70A UOM1 - EA FinishZinc ...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL 1958-1969Additional Information OEM No.42302-58 UOM1 - EA FinishZinc ...

Matte chrome steel front section of rear brake line fits between the master cylinder and junction.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in ...