Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 8752-19 Chrome Transmission Side Cover Cap fits '66-'85 Big Twin Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 9002-4 Cap-Style Head Bolt Cover fits '84-'E85 Evolution Big Twin Models Features: Cover the unsightly factory 12-point headbolts; come complete with setscrews 7/16" size Fitment 1985 Harley-Davidson Fat Bob...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 8794-10 7/8" Torx/Button-Head Brake Rotor Mounting Hardware Kit w/ Nuts fits '99-'23 FXST/​FLST/FXWG (OEM #3655) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Santoro Fabworx - Not Yo Daddy’s Engine Crash Bar fits '23(CVO), '24 FLT Models Features: Bagger Crash Bar Powercoated Gloss Black 33” wide Comes with APR mounting hardware and replaceable Delrin sliders Does not fit CVO models with a...

Lyndall Brakes - 12.5” / 320mm Perimeter Rotor fits '24 FLH/FLT Models (Except CVO) Features: Lyndall rotors are meticulously designed and thoroughly tested to ensure maximum performance in the most extreme environments and conditions...

Danny Gray - Double Diamond Weekday IST Two-Up Seat fits '24 FLHX/FLTRX Models Features: The 2-up for daily use Designed with a passenger in mind, this 2-up seat offers the clean looks of a solo with some cushion for a passenger The seat base...

Danny Gray - Double Diamond Weekday IST Two-Up Air Seat fits '24 FLHX/FLTRX Models Features: The 2-up for daily use Designed with a passenger in mind, this 2-up seat offers the clean looks of a solo with some cushion for a passenger The seat...

Ken's Factory - Single Groove Black Dash Insert fits '21-'23 FLTRXS/ST/FLHXS/ST Models Features: Made out of 5052 Aluminum Comes with double sided tape

Ken's Factory - Tri Groove Black Dash Insert fits '21-'23 FLTRXS/ST/FLHXS/ST Models Features: Made out of 5052 Aluminum Comes with double sided tape

Hofmann Designs - Smooth Steering Stem Cover fits '14-'23 Touring Models - Black Features: Machined from T6061 Billet Aluminum Designed to cover up the stem bolt Made in the USA Fitment 2023 - FLTRK Road Glide...

Hofmann Designs - 12PNT Bagger Steering Stem Cover fits '14-'23 Touring Models - Black Features: Machined from T6061 Billet Aluminum Designed to cover up the stem bolt Made in the USA Fitment 2023 - FLTRK Road Glide...

Colony - 41242-08 1.48" x .736" Wheel Spacer w/ 25mm Diameter fits '08-'17 FXD/​FXDWG/FLHT w/o ABS Models (OEM #41242-08) Features: Steel construction, polished, then chrome-plated Made in the U.S.A...

Colony - 9884-20 Zinc Motor Case Bolt Kit fits '96-'98 Evolution Big Twin Models (OEM #3398, 3504A) Features: Includes all necessary hardware for bolting together the motor case Made in the U.S.A. Replacement Part for...

Colony - 2709-24-P Smooth Motor Mount Bolt Kit fits '09-'16 FLT Models (OEM #4313, 4688) Features: Individual bolt and nut sets for specific applications Bolt kits include allen screws, nuts and washers Replacement Part for...

Colony - 9401-1 Aluminum Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Pro-One - Slim Saddlebag Cover Latch w/ Carbon Fiber Insert fits '14-'23 Touring Models Features: Add a custom look to your bike Billet aluminum construction with a smooth or ball-milled design Includes all mounting hardware Direct bolt-on;...

Custom Dynamics - Amber/White LED Vent Insert fits '14-'23 Touring Models (OEM #292000-07) Features: Dual color Genesis® 4 LEDs are packed behind each side of the mesh for visibility like never before Allows stock fairing vent to open and...

Custom Dynamics - Fairing Vent Cover fits '14-'23 FLHT/​FLHX/​FLHXS/​FLHXST/​FLHTCUTG Models (OEM #292000-07) Features: Features built-in stainless steel vent mesh to match the stock air cleaner Vent trim does not interfere with opening and closing...

Colony - 2297-1 Magnetic Oil Tank Drain Plug with Gasket fits '00-'23 Big Twins Models (OEM #60328-98A) - Zinc Features: Made in the USA Fitment 2016 Harley-Davidson Fat Boy S FLSTFBS - - 2016 Harley-Davidson Softail Slim S...

Custom Dynamics - Taillight Eliminator License Plate Mount Relocate your license plate using the OEM center taillight baseplate location on Harley-Davidson motorcycles with the Taillight Eliminator License Plate Mount. This unit installs in place of the...

Custom Dynamics - Rear Fender 3-Hole Cover Features: Decorative plastic triangle is designed to mount over the 3-hole bolt pattern left visible in the rear fender when OEM license plate bracket removed Attaches to fender using double-sided...

Custom Dynamics - Red LED Rear Strut Mount Turn Signal Smoke Lens fits Dyna, Softail & Sportster Models Upgrade your Harley-Davidson® Dyna, Sportster or Softail motorcycle with our aggressively styled LED rear turn signals. These turn signals...

Custom Dynamics - 7” Shark Demon® Round LED Headlight W/ Color Changing Backlight fits '94-'13 Harley Model Elevate your ride to the next level of brilliance with Custom Dynamics latest innovation! The Shark Demon™ LED motorcycle...

Custom Dynamics - Shark Demon® 7” Round LED Headlight with Color Changing Backlight Features: DOT & SAE Compliant Traditional 7” round motorcycle headlight with Shark Demon® high-performance styling and optics Low beam...

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - 9645-2 Cadmium OEM-Style Oil Pump Plug fits '84-'99 Evolution Big Twin Models (OEM #26263-80) Features: Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1998 Harley-Davidson Road King...

Bung King - Highway Peg Crashbar fits '24-Up Touring Models Protect your Harley Davidson FLH motorcycle with our newly available Front Crash Bar, designed for 2024-2025 Road Glide, Street Glide, Road King, Electra Glide, Ultra...

Bung King - Gripper Brake Pedal Pad for FLH Model Upgrade your ride with this high-performance brake pedal pad designed specifically for Harley Bagger FLH models. Crafted from precision laser-cut 1018 cold-rolled steel, each pedal is engineered for...

Bung King - Bagger V Bar Highway Peg Crashbar Protect your Harley Davidson FLH motorcycle with our newly available Front Crash Bar, designed for 2009-2023 Road Glide, Street Glide, Road King, Electra Glide, Ultra Classic, and more. Whether you're an...

Namz - Speedometer Wiring Harness Kit fits '98-'98 FLHR/FXDWG Model Speedometer wiring harness kit. Kit is used to install electronic speedometer assemblies, digital electronic speedometer with tachometers, and replica electric speedometer, on 1998...

Namz - Speedometer and Tachometer Harness Kit fits '96-'97 FLHR Model Speedometer and tachometer wire harness upgrade kit allows change over to electronic speedometer. Fitment: FLHR 1996-1997 Tech Note: Suggested to use with #39-0449...

Burly Brand - Black Handlebar Cable/Line Install Kit for 16" Ape Hanger Bar fits '17-'20 Touring Models (W/ ABS) (Open Box) Features Complete installation kit for Burly Ape hangers Kits include extended brake line (unless noted), extended clutch...

Colony - 8931-16 Rocker Box Cover Allen Screw fits '84-'98 FXST/FLT, '86-'UP XL, '91-'98 FXD Models - Chrome Chrome rocker box cover allen screw kit Fitment: FXST 1984-1998 FLT 1984-1998 XL 1986-UP FXD 1991-1998 FXR 1984-1994 FLST 1986-1998

Colony - 9002-4 Cap Headbolt Cover fits '86-'98 FXST/FLT/FLST, '91-'98 FXD, 86-94 FXR Models - Chrome Chrome cap headbolt cover. Fitment: FXST 1986-1998 FLT 1986-1998 FXD 1991-1998 FXR 1986-1994 FLST 1986-1998

Colony - 9213-4 Inner Pushrod Cover fits '84-'98 FXST, '79-'98 FLT, '79-'84 FX/FL Models (OEM #17935-79) Inner pushrod cover. Fitment: FXST 1984-1998 FX 1979-1984 FLT 1979-1998 FXD 1991-1998 FXR 1984-1994 FL 1979-1984 FLST 1986-1998

Colony - 9306-7 Cam Cover Cadmium Screw Kit fits '70-'84 FL, '91-'92 FXD, '82-'92 FXR Models Cam cover screw kit with a cadmium finish. Fitment: FL 1970-1984 FXD 1991-1992 FXR 1982-1992 FX 1971-1984 FXST 1984-1992 FLT 1979-1992 FLST 1986-1992