Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the separate pruchase of OEM #90781-93 Lower Saddlebag Guard Set, to complete the installation...

Engine bar features 1-1/4" tubing, and 3 point mounting.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made...

Bar complements the traditional Touring style and features 1-1/2" diameter tubing.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They...

Front engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional Information UOM1 - EA FinishBlack LocationFront ManufacturerV-Twin OriginImported

Comfort style rear engine bar are black guards in which the top of the guards angles downward providing more leg room for the passenger.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

Comfort style rear engine bar are chrome guards in which the top of the guards angles downward providing more leg room for the passenger.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

Rear engine bar set with black finish. Set includes saddle bag supports, left and right guards, and hardware to replace the under the saddlebag support with loop style saddlebag guards for a traditional look.These bars protect the leading edge of the...

Replica swingarm frame is our authentic reproduction of FLH style to accept a Panhead or Shovelhead engine, 4-speed transmission, seat post, and accepts a round or square swingarm. All components are pressed and formed as stock.Frame details include...

Chrome swingarm mount kit includes right and left side chrome pivot caps, passenger footboards mount and passenger footboard with rubber pads.Installation will require re-installation of the original hardware. Fits:FLT 2007-2008Additional Information ...

Rear frame fork bracket set has a chrome finish and includes both the left and right side bracket. Brackets have peg mount holes.Sold as a pair. Fits:FLT 2007-2008Additional Information OEM No.50588-07 UOM1 - SET ManufacturerV-Twin OriginImported ...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT 1985-2006Additional Information OEM No.50588-93 UOM1 - SET ...

Chrome engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the seperate purchase of OEM #90781-93 Lower Saddlebag Guard Set, to complete the installation...

Rear frame set bar features left and right sides with 7/8" tubing.The stock shape reflectors are not included. *NOTE: Not for use with saddlebag rails. **WARNING: This frame bar may provide limited leg and cosmetic vehicle protection under unique...

Engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protection from...

Engine bar features 1-1/4" tubing, and 3 point mounting.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made...

Black engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original hardware. ...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original hardware. Fits:FLT 1982-2006Additional Information UOM1...

Chrome rear frame bar set. Top of the bar is angled downward to allow for more passenger leg room.*WARNING: This frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide)...

Profile frame bar set features left and right sides with 7/8" chrome plated tubing. For use with stock type saddlebag supports.The unique shape of these guards gives the passenger more leg room. Not for use with saddlebag side rails. 2004-2008 FLTR, FLHX...

Fairing outer shell is made from fiber reinforced plastic. This shell includes brass inserts to accept screws to mount to the inner fairing.This outer shell allows use of the stock hardware. ...

New Old Stock" Frame gusset plate is for the left side on swingarm frames.New Old Stock from the 1980's, part has rust and oxidation! Fits:FL 1958-1968FLH 1958-1968Additional Information OEM No.47261-68 UOM1 - EA ManufacturerV-Twin OriginUSA ...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount. Fits:FLT 1982-2017Additional Information UOM1 - KIT ...

10" dark smoke Batwing fairing windshield. Fits:FLHT 1996-2013FLHX 1996-2013Additional Information OEM No.58303-96 UOM1 - EA ManufacturerV-Twin OriginImported StyleNon-Detachable 2025 Catalog Pages23

7" dark smoked wind splitter windshield for the Batwing fairing is easy to install and gives the fairing a more stylish look while decreasing the wind noise. Constructed of Lexan material.NOTE: Does not fit with windshield bags or pouches. Fits:FLHT...

FXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated polycarbonate for strength and scratch resistance. Fits:FLHT 1996-2013FLHX 1996-2013Additional...

Fairing air deflector set with dark smoke tint reduces draft behind the fairing.Designed to deflect air away from the driver's elbow and upper torso. *NOTE: The mounting hardware must be ordered separately. Fits:FLH 1996-2013FLHX 1996-2013Additional...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional Information OEM No.88862-67 UOM1 - EA ...

Beaded windshield is a fixed mount type which comes completely assembled.Includes beaded windshield top and an adjustable lower windshield to fit FL aluminum headlamp cowl assembly. The center bolt to the top of the windshield measures 14". Order...

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH 1969-1984Additional Information OEM No.58164-69 UOM1 - EA ...

Top beaded windshield is short style. Fits:FLH 1949-1984Additional Information OEM No.58020-49A UOM1 - EA MeasurementsAdditional InformationHeight: 15"Width: 22-1/2"Thickness: .090" ManufacturerV-Twin OriginImported 2025 Catalog...

Black pointed top sissy bar for Touring models combines a menacing appearance with exceptional passenger comfort, making it a true head turner that also proves to be your passenger's best friend on long rides.Designed for convenience, sissy bar...

Rear detachable docking hardware bracket set includes the left and right docking point brackets in a black finish.All necessary hardware is included. Sold as a set of 2. ...

Raw alignment clips are for hinged rear fenders, to be spot welded on the front portion of the fender.Sold as a pair. *NOTE: Used to align and hold the rear tail flap edges in place. Fits:FLH 1941-1978Additional Information UOM1 - SET ...

36" Bronx straight tail set features a chrome finish with an inner diameter of 1-7/8" and comes without baffles.Extension pipes have channel mount brackets that are welded in place. Includes channel mount on top of the pipe to mount like the original...

Drag Specialties - Red Stitched Double Diamond Extended Reach Predator III Seat fits '08-'24 Touring Models (Except '23 FLHXSE/FLTRXSE) (Open Box) Features: Moves the rider back 1-1/2" compared to stock FLHR seat and 1" on FLTRX Road Glide and FLHX...