CVO Screamin' Eagle Electra Glide FLHTCSE

1/4" diameter stepped starter bolt hex cap screw with a thread size of 10-32. Fits:FXD 1991-2005FLST 1989-2006FLT 1989-2006FXST 1989-2006Additional Information

V-Twin - 37-9244 - Starter BoltDescriptionStarter bolt. Fits:FLT 1994-UPFXD 1994-2017FLST 1994-UPFXST 1994-UPAdditional Information

Tour-Pak chrome replacement latch is for the rear. Includes the catch and spacer plate. Two sets are required for each Tour-Pak.Rivets are 1/8" diameter x 5/16" long. *NOTE: Requires 4 pieces of 6-32...

Chain tensioner screws has phillips flat head Fits:FXD 1991-2005FLST 1986-2006FXST 1984-2006FL 1965-1984FX 1971-1984FLT 1984-2005FXR 1984-1994Additional Information

Allen style transmission dipstick Fits:FXD 1991-2005FLST 1987-2006FXR 1987-1994FLT 1987-2006FXST 1987-2006Additional Information

V-Twin - 37-8932 - Spotlamp Collar SetDescriptionSpotlamp collar set Fits:FLST 1986-UPFL 1964-1984FLT 1979-UPAdditional Information

V-Twin - 37-8842 - Front Fender Emblem Speed NutsDescriptionSpeed nuts are used to attach fender emblems to the front fender. Fits:FLT 1984-1995FLST 1986-1995FLT 2000-2013FLST 1986-UPFL...

V-Twin - 37-8833 - Swivel Taper Spotlamp WashersDescriptionLarge swivel taper spotlamp Fits:FLST 1986-UPFL 1964-1984FLT 1979-UPAdditional Information

Chrome socket lever pin set Fits:FLST 1986-2014FXD 1991-2014FLT 1982-2007FXST 1984-2014XL 1982-2003FXR 1984-1994Additional Information

V-Twin - 37-8784 - Fender Trim Side Rail Tee BoltDescriptionGlide fender trim side rail tee bolt for left and right sideSold as a 4 piece set. Fits:FLT 1982-UPFLST 1986-UPAdditional Information

V-Twin - 37-6368 - Replacement Fender Brace RivetsDescriptionReplacement rivets for front and rear fenders.. Fits:FLH 1949-1984FLST 1986-UPFLT 1979-UPAdditional Information

V-Twin - 37-2001 - Rear Fender Mount Boss Nut KitDescriptionRear fender mount kit includes a boss jam nut, washers and bolt to mount the fender.Kit includes 16 pieces, 4 of each. Fits:FLT...

V-Twin - 37-1223 - Breather Washer SetDescriptionNylon breather washer set includes 20 washers - 10 with large holes and 10 with small holes. Fits:XL 1991-UPFLT 1993-UPAdditional Information

V-Twin - 37-1209 - Head Bolt Cover Set ChromeDescriptionChrome head bolt cover set.Sold as a set of 4. Fits:FLT 1999-2016FXST 1999-UPFLST 1999-UPFXD 1999-2017Additional Information

V-Twin - 37-0981 - Saddlebag Bracket Nut SetDescriptionSaddlebag bracket nut set.Sold as a set of four. Fits:FLT 1995-UPAdditional Information

Side cover rubber grommets are inserted into frame tab to secure side cover. Fits:FLT 1996-2007Additional Information OEM No.11491A

Side cover rubber grommets are inserted into frame tab to secure side cover. Fits:FLT 1997-2007Additional Information OEM No.11491-A

V-Twin - 37-0895 - Front Fender Zinc Mount KitDescriptionFront fender mount kit has a zinc finish. Fits:FLT 1980-UPAdditional Information

V-Twin - 37-0831 - Primary Derby Screw Kit ChromeDescriptionChrome primary derby screw kit. Fits:FXST 1999-UPFLST 1999-UPFLT 1999-UPFXD 1999-2017Additional Information

Chrome screw cover set for grooved rocker box cover.Sold as a 4 piece set. Fits:FLT 1999-2016FLST 1999-2017FXST 1999-2017FXD 1999-2017Additional Information

V-Twin - 37-0552 - Chrome Spotlamp Bracket Spacer SetDescriptionSpotlamp bracket spacer set feature a chrome finish.Sold as a set of 2. Fits:FLT 1986-UPFLHT 1986-UPAdditional Information

Chrome front axle cap cover set is cap style and includes right and left caps with set screws for glide type forks.Sold as a pair. Fits:FLT 2000-2007 Front FitmentFLHT 2000-2007FXD...

Chrome axle nut cap set for both axle nut and axle head.Includes one cap with internal hex to secure to the axle nut for 1" axle. Caps are machined to allow more thickness to prevent set screw...

V-Twin - 37-0043 - Rocker Box Screw Kit ChromeDescriptionRocker box screw kit with a chrome finish. Fits:FLT 1999-2016FXST 1999-UPFLST 1999-UPFXD 1999-2017Additional Information

V-Twin - 36-8100 - 46.25 inch Throttle and Idle Cable SetDescriptionBlack vinyl throttle and idle cable set with 90  elbow fitting measures +12" over stock.Cables are 46.25" long, measured from the...

Clutch cable is black vinyl and features a stock length of 64.69". Fits:FXDL 2001-2005FXST 2000-2005FLST 2000-2005FLT 2000-2005Additional Information

V-twin black clutch cable has a casing length of 74.69" and is 12" over stock length.Features heavy duty construction designed for reliability and longer service life. Fits:FLST 1987-2006FLT...

Handlebar cable and wiring line kit is for the complete installation on 12"-14" ape hangers.Kit includes extended clutch cable or clutch line, extended throttle and idle cable as required and all...

V-Twin - 36-0882 - Black Throttle Cable with 90  Elbow FittingDescriptionBlack throttle cable has a 90  elbow fitting. This cable has a casing length of 41" which is 8" over stock.Throttle with 90 ...

Throttle and idle cable set in braided stainless steel with a clear coat is 8" over stock length.Stainless steel braided with a clear coat throttle and idle cable set includes the cruise control...

Throttle and idle cable set in braided stainless steel with a black coat is 8" over stock length.Stainless steel braided with a black coat throttle and idle cable set includes the switch control and...

Throttle and idle cable set in braided stainless steel with a black coat is stock length. The casing length is 43" for the idle cable and 39-1/2" for the throttle cable.Stainless steel braided with a...

V-Twin - 36-0861 - 42.25 inch Black Throttle and Idle Cable SetDescriptionBlack vinyl throttle and idle cable set with 90  elbow . fitting measures +8" over stock.Cables are 42.25" long, measured...

V-Twin - 36-0858 - 34.25 inch Black Throttle and Idle Cable SetDescriptionBlack stock legnth throttle and idle cable set with 90  elbow fitting.Cables are 34.25" long, measured from the 90  bend, to...

V-Twin - 36-0857 - 30-1/2 inch Stainless Steel Throttle and Idle Cable SetDescriptionStainless steel braided with a clear coat throttle, idle cable set with 90  elbow fitting. These cables are...

Throttle and idle set in braided stainless steel with a clear coat is stock length. The casing length is 43" for the idle cable and 39-1/2" for the throttle cable.Stainless steel braided with a clear...

V-Twin - 36-0809 - Choke Cable Assembly KitDescriptionChoke cable assembly kit with the CV carburetor top mount bracket to relocate the choke assembly cable, includes the knob, casing and inner wire...

Clutch cable in braided stainless steel is +10" over stock length to fit stock Big Twin models.Stainless steel braided clutch cable is constructed with the Supra stainless steel braid which is...

Clutch cable in braided stainless steel is +6" over stock length to fit stock Big Twin models.Stainless steel clutch cable is constructed with the Supra stainless steel braid which is tightly woven...

Clutch cable in braided stainless steel is +4" over stock length to fit stock Big Twin models.Stainless steel clutch cable is constructed with the Supra stainless steel braid which is tightly woven...