Electra Glide FLH

Evolution rocker box cover d-ring set features an alloy natural finish.Sold as a pair. Fits:FLH 1984-1991FLST 1984-1991Additional Information UOM

Replica 80" front or rear Evolution cylinder is sold each. Cylinder has a natural finish.Piston and rings are not included. Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST...

Billet lower pushrod cover set features a natural alloy finish. Set fits Evolution models.Sold as a four piece set. Fits:FX 1984-1999FL 1984-1999Additional Information

V-Twin - 11-0571 - Rocker Arm Shaft SetDescriptionSifton rocker arm 4 piece shaft set for 1986-up. Fits:FLT 1984-2016FXD 1991-2017XL 1986-UPFLST 1986-2017FXST 1984-2017FXR 1984-1994Additional...

Evolution Shovelhead rocker box set accepts 1/2" x 20 end plugs. Features a natuarl cast aluminum construction with shot peened finish and cast shape readily accepts a black VHT finish.Allen screws...

Alloy lifter block set for Evolution engines. Fits:FLT 1985-1999FLST 1985-1999FXST 1985-1999Additional Information UOM1 - SET

Set of 3 steel cages, fitted with standard size Torrington rollers for connecting rods. Cages feature copper plating. Fits:UL 1937-1948FXR 1982-1986FLT 1979-1986FXST 1984-1986FX 1971-1984EL...

Bolt-on 4-finned cam cover kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome forged aluminum 4-finned cam cover with bushings installed, cast aluminum cam cover...

Bolt-on cam cover kit for Evolution models to give it the Retro-style 1965 Panhead look.Kit includes a replica cast cam cover flatstide style with bushings installed, cast aluminum cam cover adapter...

Engine case right bearing washers. Fits:FLT 1979-1986FXST 1984-1986FX 1971-1984FLST 1986-1986FL 1958-1984FXR 1984-1986Additional Information

Oil pump check and relief valve plug with a chrome finish. Fits:FLT 1981-1998FXST 1984-1998FXR 1982-1994FXD 1991-1998FL 1981-1984FLST 1986-1998FX 1981-1984Additional Information

Hex type shifter bracket bolt kit with a parkerized finish. Fits:FXST 1984-1999FLT 1980-1986FXR 1982-1994FLST 1986-1999FX 1971-1984FL 1936-1984Additional Information

Chrome allen screw kit for primary cover. Fits:FLT 1985-1999FXR 1985-1994Additional Information UOM1 - KIT

The magnetic drain plug prevents metal particles from circulating through the transmission. And the drain plug washer is constructed of brass.*NOTE: Plug is 1/2"-13 UNC. Fits:FL 1941-1985Additional...

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

V-Twin - 52-1291 - 23 inch x 3.0 Drop Center Chrome Wheel RimDescriptionFront 23" chrome drop center rim has an outside width of 3.0" with 2 flat flanges and 40 holes.The outside width measures 3.65"...

Front 23" x 3.00" wheel assembly features chrome spokes, chrome hub, and chrome rim. This wheel comes with 3/4" bearings and fits dual disc applications.*Note: UPS may consider this part as packaged...

Front 16" x 3.00" wheel include chrome hub with internals, chrome drop center rim, and 40 chrome twirled spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

16" x 3.00" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Wheel and caliper kit includes a chrome wheel assembly, chrome caliper, chrome 51 tooth sprocket, rear drilled disc, bolts, chrome caliper bracket, support spring, and chrome stay bar with bolts...

21" x 3.25" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front 16" x 3.5" Duro 26 Fat Spoke wheel features a matte black finish and 25mm bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 3/4" bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide)...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

FXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information <

Top beaded windshield measure 18" and is for use on fiberglass fairings only.Fits 1969-1984 FLH 4 speed and 1980-1985 FLT 5 speed models with Batwing fairings. Fits:FLT 1980-1985FLH...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Drag Specialties - DS325521 - Transmission End Cover - Chrome - '36-'86 Big TwinFeaturesReplacement end coverReplacement Part for OEM Number(s):3327736ASpecs

Drag Specialties - DS243103 - Replacement OEM-Style Rubber Grips - Dual ThrottleFeaturesCome with throttle sleeve installed for dual or single-cable applicationsReplacement Part for OEM...

Drag Specialties - DS240210 - Kickstand Leg StopFeaturesReplacement component for chrome kickstandsReplacement Part for OEM Number(s):5001574,5002874Specs

Drag Specialties - DS196010 - Kickstarter ShaftFeaturesHigh-quality steel replacement shaftMachined for an exact fitReplacement Part for OEM Number(s):3309654BSpecs

Drag Specialties - DS181201 - Chain Tensioner Mount - Big TwinFeaturesUsed for updating an old adjuster system or when building a new bike from the ground upComplete kit includes washers, adjuster...

Drag Specialties - 24041047 - Speed Nut - 4-PackFeaturesOE replacementSpecsColor/FinishSilver<

Drag Specialties - 21130212 - AGM Battery - YTX24HLBSFeaturesMSDS Migration DataSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology...

Drag Specialties - 21100225 - Starter - High Torque - BlackFeaturesFeatures 15% more power and torque than OEM unitsManufactured using heavy-duty armature commutators, large drive-end bearings and...