1966 Electra Glide FLH

Locating washer for backing plate pivot stud.Sold in a quantity of five. Fits:FL 1949-1971Additional Information OEM No.44454-48

Brake backing plate pivot stud with locating washer. Fits:FL 1949-1971G 1958-1971Additional Information OEM No.44448-48

Chrome fork neck cup set with races installed.Includes bearings. Must order dust shields separately. Sold as a pair. Fits:FL 1960-1984Additional Information

Kit includes neck cup bearing, dust cover set, cone cover nut, stem nut and lock washer kit. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

Zinc fork neck cup set with races installed. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.48311-60

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

Chrome hex type cone cover nut features cover with built in nut. Fits:FL 1949-1979Additional Information OEM No.48330-48

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

Front brake cable tube only chrome has a 5/16" x 24 thread. Fits:K 1952-1956XL 1957-1972 FrontFL 1950-1971Additional Information OEM No.

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Fork tube includes fork damper kit, fork spring set, fork baffle kit, chrome fork tube cap, inner fork tube plug, oil seal, and snap rings. The fork tubes are stock and are 20" long.Sold as a pair...

Raw machined steel fork tube is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. ...

Fork tube set is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. *NOTE:...

Black brake drum for the right or left glide front ends. Fits:FL 1948-1966Additional Information OEM No.44111-48

Kit includes brake shoes, springs,polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, chrome backing plate, chrome drum, axle sleeve, nuts, cam with leverm and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for left side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, satin chrome backing plate, chrome drum, axle sleeve, nuts, cam with lever and mount stud for left side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud...

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

Satin chrome brake drum for the front left or right side glide front ends. Fits:FL 1948-1966Additional Information OEM No.44111-48

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Chrome steel spacer is 3/8" x 3/4" x 3/16".This spacer is used in the rear master cylinder and also a spacer for the brake pedal stop. Spacer can also be used on banana bulleye calipers that utilizes...

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Left glide brake shoe kit.*NOTE: Does not include drum or backing plate. Fits:FL 1949-1967Additional Information UOM1 - KIT

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Front brake shoe kit.*NOTE: Does not include drum or backing plate. Fits:FL 1949-1966Additional Information UOM1 - KIT

V-Twin - 23-1335 - Grate Brake Pedal Pad Large ChromeDescriptionGrate style brake pedal pad is the large type featuring a chrome plated finish. Surface has raised knubs for better grip and...

V-Twin - 23-1334 - Grate Brake Pedal Pad Large BlackDescriptionGrate style brake pedal pad is the large type featuring a black finish. Surface has raised knubs for better grip and self-cleaning...

V-Twin - 23-1328 - Grate Brake Pedal Pad Large BronzeDescriptionGrate style brake pedal pad is the large type featuring a bronze plated finish. Surface has raised knubs for better grip and...

Chrome wheel lug 5 piece set includes "T" handle lug wrench. Fits:FL 1941-1966G 1936-1976EL 1936-1952Additional Information UOM1 - KIT<

Rear brake drum assembly features a black finish with a chrome axle kit. Includes drum, axle, spacer, rear hydraulic hose, and backing plate with shoes and wheel cylinder.Wheel not included. Will...

Master cylinder constructed of cast iron and features a natural aluminum finish with an alloy top for Wagner and V-Twin master cylinders.Includes baffle plate as original! ...

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order rubber hose for final connection to the rear wheel cylinder or caliper assembly. ...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL...