FXR Clutch, Driveline & Trans

James Gasket - Transmission Seal Kit fits '94-'98 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Mad

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features:

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much...

Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042)

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case

Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal<

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt...

Belt Drives Ltd. - 1-5/8" Belt Drive fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of...

WD Bearing - Transmission Cover Bearing fits '91-'99 FXD, '82-'94 FXR, '86-'99 FLST/FXST Models (OEM #8998) Quality bearing for a 5-speed transmission cover is a high quality hardened steel bearing...

Colony - 8906-5 Transmission Shifter Cover Screw Allen fits '82-'86 FXR, '80-'86 FLT Models Transmission shifter cover screw, allen style Fitment: FXR 1982-1986 FLT 1980-1986

Colony - Acorn Front Belt Drive Pulley Nut fits '99-'06 Twin Cam Models Features: Chrome front pulley nut for open primary belt drive applications Made in the U.S.A. <

Drag Specialties - 1-1/2" Rear Drive Belt 136 Tooth fits '85-'96  Touring, '85-'94 FXR Models (OEM #40001-85) Features: Carbon fiber reinforced Goodyear engineered Falcon SPC™ belts offer up to...

Barnett - Scorpion Pressure Plate fits '00-'06 Softail & '99-'06 Touring Models Using Hydraulic Clutch System (Repl. OEM #S 45380-02, 45992-03) This pressure plate has a strong billet aluminum...

DP - High-Performance Friction Clutch Plates fits '68-E'84 Big Twin Models (Repl. OEM #37930-68) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for...

DP - High-Performance Friction Clutch Plates fits '90-'97 Evo Big Twin & '91-'22 Sportster Models (Repl. OEM #s 37911-90 & 37910-90) The DP High-Performance Friction Clutch Kit Plates have DP's...

DP - High-Performance Steel Clutch Plates fits L'84-'97 Big Twin & '91-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S, '22 Nightster/RH975 Models) (Repl. OEM #s 37975-90, 379795-84A &...

Pro-One - Millennium Derby Cover fits '99-'18 Big Twin Models (Exc. '18 FLSB & '15 FLHTCUL/​FLHTKL Models) These billet aluminum covers are available in smooth & black or chrome & bar-milled. NOTE:...

Baker - DD6-Speed Gear Set fits '99-'00 Touring Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a fixed...

Baker - DD6-Speed Gear Set fits '90-'97 FXR & Touring Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a...

Baker - DD6-Speed Gear Set fits '90-'97 Touring & FXR Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a...

Drag Specialties - Pressure Plate Fits '41-'E84 Big Twin Models Sold each. Features Stamped steel construction Designed for use with five-stud clutch hubs Fitment

V-Twin - York FXR Rear Chain Drive Kit W/ 5 Spoke Sprocket fits '82-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth...

Drag Specialties Clutch Shell fits '84-'89 Harley Big Twins OEM #37707-84 Replacement clutch shell with starter gear. Fitment 1986-1989 Harley-Davidson Softail Custom FXSTC

Drag Specialties - High Performance Pressure Plate Fits '41-'E84 Big Twin Models Features Highly polished aluminum pressure plate will not warp or flex Allows smooth, positive clutch action

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A.

Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both b

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing